- 10 1月, 2012 40 次提交
-
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
This patch is part of a patch-set which changes the MTD interface from 'mtd->func()' form to 'mtd_func()' form. We need this because we want to add common code to to all drivers in the mtd core level, which is impossible with the current interface when MTD clients call driver functions like 'read()' or 'write()' directly. At this point we just introduce a new inline wrapper function, but later some of them are expected to gain more code. E.g., the input parameters check should be moved to the wrappers rather than be duplicated at many drivers. This particular patch introduced the 'mtd_erase()' interface. The following patches add all the other interfaces one by one. Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
We are going to re-work the MTD interface and change 'mtd->write()' to 'mtd_write()', 'mtd->read()' to 'mtd_read()' and so forth for all functions in the 'struct mtd_info' structure. However, mtdchar.c has its own 'mtd_read()', 'mtd_write()', etc functions which collide with our changes. This patch renames these functions to 'mtdchar_read()', 'mtdchar_write()', etc. Additionally, to make the 'mtdchar.c' file look consistent, rename similarly all the other functions starting with 'mtd_'. Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
We allocate the "mtd" structure using kzalloc which means we do not have to initialize unused MTD function pointers to NULL, since it is safe to assume in Linux that NULL contains all zeroes. Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Julia Lawall 提交于
Reimplement a call to devm_request_mem_region followed by a call to ioremap or ioremap_nocache by a call to devm_request_and_ioremap. The semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @nm@ expression myname; identifier i; @@ struct platform_driver i = { .driver = { .name = myname } }; @@ expression dev,res,size; expression nm.myname; @@ -if (!devm_request_mem_region(dev, res->start, size, - \(res->name\|dev_name(dev)\|myname\))) { - ... - return ...; -} ... when != res->start ( -devm_ioremap(dev,res->start,size) +devm_request_and_ioremap(dev,res) | -devm_ioremap_nocache(dev,res->start,size) +devm_request_and_ioremap(dev,res) ) ... when any when != res->start // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Julia Lawall 提交于
Data allocated with devm_ioremap or devm_ioremap_nocache should not be freed using iounmap, because doing so causes a dangling pointer, and a subsequent double free. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ expression x; @@ ( x = devm_ioremap(...) | x = devm_ioremap_nocache(...) ) @@ expression r.x; @@ * iounmap(x) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Jamie Iles 提交于
Add device tree bindings so that the gpio-nand driver may be instantiated from the device tree. This also allows the partitions to be specified in the device tree. v7: - restore runtime device tree/non device tree detection v6: - convert to mtd_device_parse_register() v5: - fold dt config helpers into a single gpio_nand_of_get_config() v4: - get io sync address from gpio-control-nand,io-sync-reg property rather than a resource - clarified a few details in the binding v3: - remove redundant cast and a couple of whitespace/naming changes v2: - add CONFIG_OF guards for non-dt platforms - compatible becomes gpio-control-nand - clarify some binding details Signed-off-by: NJamie Iles <jamie@jamieiles.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Jonas Gorski 提交于
Only use the values from the image tag if it is valid. Always create the CFE, NVRAM and linux partitions, to allow flashing a new image even if the old is invalid without overwriting CFE or NVRAM. Signed-off-by: NJonas Gorski <jonas.gorski@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Jonas Gorski 提交于
Instead of referencing the sizes of fixed partitions, use the precomputed CFE/NVRAM lengths. Signed-off-by: NJonas Gorski <jonas.gorski@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Jonas Gorski 提交于
The CFE boot loader on BCM63XX platforms assumes itself and the NVRAM partition to be 64 KiB (or erase block sized, if larger). Ensure this assumption is also met when creating the partitions to prevent accidential erasure of CFE or NVRAM. Signed-off-by: NJonas Gorski <jonas.gorski@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Jonas Gorski 提交于
Recent CFEs do not contain the CFE1CFE1 magic anymore, so check for the "cfe-v" version marker string instead. As very old CFEs do not have this string, leave the CFE1CFE1 magic as a fallback for detection. Signed-off-by: NJonas Gorski <jonas.gorski@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Rusty Russell 提交于
You didn't mean this to be a bool. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Robert Jarzmik 提交于
As the MTD api has no use for the number of erase cycles each block has endured, remove the function which calculated that value. If one day MTD api finds it usefull for wear levelling algorithms to have this information, the function should be put back in place. Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Shengzhou Liu 提交于
- fix NAND_CMD_READID command for ONFI detect. - add NAND_CMD_PARAM command to read the ONFI parameter page. Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Shengzhou Liu 提交于
There was a bug for fmr initialization, which lead to fmr was always 0x100 in fsl_elbc_chip_init() and caused FCM command timeout before calling fsl_elbc_chip_init_tail(), now we initialize CWTO to maximum timeout value and not relying on the setting of bootloader. Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Liu Shuo 提交于
If we use the Nand flash chip whose number of pages in a block is greater than 64(for large page), we must treat the low bit of FBAR as being the high bit of the page address due to the limitation of FCM, it simply uses the low 6-bits (for large page) of the combined block/page address as the FPAR component, rather than considering the actual block size. Signed-off-by: NLiu Shuo <b35362@freescale.com> Signed-off-by: NJerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: NTang Yuantian <b29983@freescale.com> Signed-off-by: NLi Yang <leoli@freescale.com> Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Roman Tereshonkov 提交于
The array of unsigned long pointed by oops_page_used is allocated by vmalloc which requires the size to be in bytes. BITS_PER_LONG is equal to 32. If we want to allocate memory for 32 pages with one bit per page then 32 / BITS_PER_LONG is equal to 1 byte that is 8 bits. To fix it we need to multiply the result by sizeof(unsigned long) equal to 4. Cc: stable@kernel.org Signed-off-by: NRoman Tereshonkov <roman.tereshonkov@nokia.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Jonas Gorski 提交于
bcm963xx-flash does nothing meaningful anymore. Signed-off-by: NJonas Gorski <jonas.gorski@gmail.com> Acked-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Jonas Gorski 提交于
Arch setup code might want to use their own partition parsers, but still use the generic physmap flash driver. Signed-off-by: NJonas Gorski <jonas.gorski@gmail.com> Acked-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Jonas Gorski 提交于
Recent BCM63XX devices support a variety of flash types (parallel, SPI, NAND) and share the partition layout. To prevent code duplication make the CFE partition parsing code a stand alone mtd parser to allow SPI or NAND flash drivers to use it. Signed-off-by: NJonas Gorski <jonas.gorski@gmail.com> Acked-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Jonas Gorski 提交于
Replace raw printk's with their pr_XXX equivalent and unify broken up strings so they become grepable. Also replace the PFX definition with a pr_fmt(). Signed-off-by: NJonas Gorski <jonas.gorski@gmail.com> Acked-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-