- 07 3月, 2018 7 次提交
-
-
由 Hans de Goede 提交于
Drop the snd_soc_dai_set_bclk_ratio() call, the rt5651 dai does not have a set_bclk_ratio() op, so it is a nop (and returns -EINVAL). Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Hans de Goede 提交于
When platform_clock_control() first selects PLL1 as sysclk the PLL_CTRL registers have not been setup yet and we effectively have an invalid clock configuration until byt_rt5651_aif1_hw_params() gets called. Add a new byt_rt5651_prepare_and_enable_pll1() helper and use that from both platform_clock_control() and byt_rt5651_aif1_hw_params() to fix this. Tested-by: NCarlo Caione <carlo@endlessm.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Hans de Goede 提交于
Add support for setting the micbias OVCD limits device-properties through quirks. And set the limits for this to 2000uA with a scale-factor of 0.75 for the KIANO SlimNote 14.2 device, which is the only device on which jack-detection is currently enabled. Tested-by: NCarlo Caione <carlo@endlessm.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Hans de Goede 提交于
Only create the jack if we have a valid jack-detect source and properly check the snd_soc_component_set_jack() return value. Tested-by: NCarlo Caione <carlo@endlessm.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Hans de Goede 提交于
Before this commit it was possible to set the DMIC_EN quirk in the machine driver, but it would never be passed to the codec driver so it was a nop. This commit adds code to actually pass the quirk to the codec driver. Since the DMIC_EN quirk was ignored before, this commit removes it from the default quirk settings, to avoid this causing an unexpected functional change. If we really want the DMIC_EN behavior anywhere it should be specifically enabled by follow up commits. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Hans de Goede 提交于
This commit add support for a new BYT_RT5651_JDSRC quirk, sets this quirk for the KIANO SlimNote 14.2 laptop and uses the new "realtek, jack-detect-source" property to pass this info to the codec driver. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Hans de Goede 提交于
If we cannot find the codec ACPI-dev, then the snd-soc-core will not be able to find the codec either and snd_soc_register_card() will just keep exiting with -EPROBE_DEFER, filling the log with errors each time the probe gets retried. Instead simply log an error from the machine driver and exit with -ENODEV. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 02 3月, 2018 1 次提交
-
-
由 Hans de Goede 提交于
Use the standard component set_jack callback instead of defining a codec private API for this. Tested-by: NCarlo Caione <carlo@endlessm.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 12 2月, 2018 1 次提交
-
-
由 Kuninori Morimoto 提交于
Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 13 1月, 2018 2 次提交
-
-
由 Andy Shevchenko 提交于
Instead of home grown snd_soc_acpi_find_name_from_hid() use acpi_dev_get_first_match_name(). Tested-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Pierre-Louis Bossart 提交于
Remove hard-codec [16] array size, replace with clearer description and dependency on ACPI_ID_LEN No functionality change Suggested-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 09 1月, 2018 4 次提交
-
-
由 Pierre-Louis Bossart 提交于
Add the DAPM widgets and routes. Tested with MinnowMax Turbot + rt5651 eval board with Speaker (LineOut) -> LineIn loopback Thanks to Bard Liao @ Realtek for providing the 0dB settings "IN Capture Volume" = 23 "ADC Capture Volume" = 47 "OUT Playback Volume" = 31 "DAC1 Playback Volume" = 175 Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-By: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Pierre-Louis Bossart 提交于
Define DMI quirk for rt5651 eval board connected to MinnowBoard Turbot. The only difference with a MinnowBoard MAX is that the MCLK pin is enabled on the LSE connector Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Tested-by: NKeqiao.Zhang <Keqiao.zhang@intel.com> Acked-By: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Keyon Jie 提交于
On Minnowboard Max with Realtek rt5651 eval board, the IN3P is connected to Headset Mic. Here add and select it for Minnowboard Max. Signed-off-by: NKeyon Jie <yang.jie@linux.intel.com> Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-By: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Pierre-Louis Bossart 提交于
The current code doesn't enable the MCLK which reduces audio quality (PLL driven from BLCK), fix the quirk Tested-by: NCarlo Caione <carlo@caione.org> Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-By: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 29 11月, 2017 2 次提交
-
-
由 Carlo Caione 提交于
This laptop has actually two different analog mics, no just one. Fix the quirk to reflect the correct configuration. Signed-off-by: NCarlo Caione <carlo@endlessm.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Carlo Caione 提交于
The RT5651 codec has 3 analog inputs. Some laptops have two different internal analog microphones on the external case. Add a new custom quirk mapping the two internal mics on IN1P / IN2P, leaving the headset mic on IN3P. Signed-off-by: NCarlo Caione <carlo@endlessm.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 26 10月, 2017 2 次提交
-
-
由 Carlo Caione 提交于
This cherry-trails laptop has the internal mic connected to the IN2 input pins. Enable the quirk to correctly map the routes. Signed-off-by: NCarlo Caione <carlo@endlessm.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Carlo Caione 提交于
Introduce an headset jack in the machine driver and register it to the codec driver. Signed-off-by: NCarlo Caione <carlo@endlessm.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 21 10月, 2017 2 次提交
-
-
由 Pierre-Louis Bossart 提交于
ACPI support is not specific to the Intel/SST driver. Move the enumeration and matching code which is not hardware-dependent to sound/soc and rename relevant sst_acpi_ structures and functions with snd_soc_acpi_ prefix soc-acpi.h is protected by a #ifndef __LINUX_SND_SOC_ACPI_H for consistency with all other SoC .h files: grep -L __LINUX include/sound/soc* | wc -l 0 grep __LINUX include/sound/soc* | wc -l 14 Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Carlo Caione 提交于
Introduce a new custom dapm routes map to quirk platforms with the internal mic connected to IN2P. Signed-off-by: NCarlo Caione <carlo@endlessm.com> Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 18 10月, 2017 4 次提交
-
-
由 Pierre-Louis Bossart 提交于
The hard-coded compressed dailinks are not supported using publicly-available firmwares, which creates unnecessary user confusion [1]. Even if the firmware was available, the mainline code does not have the required .dynamic=1 and .dpcm_playback=1 fields so probably never worked as is, and last and they conflict with topology-defined streams. Remove them and move on. This can be re-enabled with SOF later in a more flexible manner. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2017-August/124868.htmlSigned-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Pierre-Louis Bossart 提交于
For some reason the Atom/HiFi2 machine drivers use an id=1 instead of zero as done on all other platforms. This gets in the way of topology-based matching, realign for consistency. This should not have any functional impact on existing solutions with don't rely on topology. Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Pierre-Louis Bossart 提交于
Remove duplicate code with a common helper in all Intel machine drivers. Suggested-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Pierre-Louis Bossart 提交于
Same as for other codecs, enable MCLK by default. When it is not present, e.g. on MinnowBoard B3 since it's not routed on the LSE connector, we fall back to blck-based clocking. The DMIC quirks are also fixed, there is a single DMIC input of the codec. reorder variables in reverse x-mas tree as suggested by Andy Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 19 9月, 2017 1 次提交
-
-
由 Pierre-Louis Bossart 提交于
There is only one dmic path and the routes were not added. Probably a copy-paste mistake when initially creating the file Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-By: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 14 6月, 2017 1 次提交
-
-
由 Takashi Iwai 提交于
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the const pointers. Constify the corresponding static objects for better hardening. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Acked-By: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 25 4月, 2017 1 次提交
-
-
由 Takashi Iwai 提交于
The FE setups of Intel SST bytcr_rt5640 and bytcr_rt5651 drivers carry the ignore_suspend flag, and this prevents the suspend/resume working properly while the stream is running, since SST core code has the check of the running streams and returns -EBUSY. Drop these superfluous flags for fixing the behavior. Also, the bytcr_rt5640 driver lacks of nonatomic flag in some FE definitions, which leads to the kernel Oops at suspend/resume like: BUG: scheduling while atomic: systemd-sleep/3144/0x00000003 Call Trace: dump_stack+0x5c/0x7a __schedule_bug+0x55/0x70 __schedule+0x63c/0x8c0 schedule+0x3d/0x90 schedule_timeout+0x16b/0x320 ? del_timer_sync+0x50/0x50 ? sst_wait_timeout+0xa9/0x170 [snd_intel_sst_core] ? sst_wait_timeout+0xa9/0x170 [snd_intel_sst_core] ? remove_wait_queue+0x60/0x60 ? sst_prepare_and_post_msg+0x275/0x960 [snd_intel_sst_core] ? sst_pause_stream+0x9b/0x110 [snd_intel_sst_core] .... This patch addresses these appropriately, too. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Acked-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org> # v4.1+
-
- 01 2月, 2017 2 次提交
-
-
由 Pierre-Louis Bossart 提交于
The current frame sync polarity definitions are inconsistent in the Atom/DPCM driver, fix to align with regular ASoC definitions and update code in platform and machine drivers for RT5640 and RT5651. Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Pierre-Louis Bossart 提交于
This patch corrects an omission in bytcr_rt5640 and bytcr_rt5651. All existing machine drivers shall not use .pm_ops to avoid a double suspend, as initially implemented by 3f2dcbea ("ASoC: Intel: Remove soc pm handling to allow platform driver handle it"). Reported-by: NShrirang Bagul <shrirang.bagul@canonical.com> Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 25 10月, 2016 1 次提交
-
-
由 Julia Lawall 提交于
Check for snd_soc_ops structures that are only stored in the ops field of a snd_soc_dai_link structure. This field is declared const, so snd_soc_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct snd_soc_ops i@p = { ... }; @ok1@ identifier r.i; struct snd_soc_dai_link e; position p; @@ e.ops = &i@p; @ok2@ identifier r.i, e; position p; @@ struct snd_soc_dai_link e[] = { ..., { .ops = &i@p, }, ..., }; @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; struct snd_soc_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct snd_soc_ops i = { ... }; // </smpl> The effect on the layout of the .o files is shown by the following output of the size command, first before then after the transformation: text data bss dec hex filename 4500 696 0 5196 144c sound/soc/generic/simple-card.o 4564 632 0 5196 144c sound/soc/generic/simple-card.o text data bss dec hex filename 3018 608 0 3626 e2a sound/soc/generic/simple-scu-card.o 3074 544 0 3618 e22 sound/soc/generic/simple-scu-card.o text data bss dec hex filename 4148 2448 768 7364 1cc4 sound/soc/intel/boards/bdw-rt5677.o 4212 2384 768 7364 1cc4 sound/soc/intel/boards/bdw-rt5677.o text data bss dec hex filename 5403 4628 384 10415 28af sound/soc/intel/boards/bxt_da7219_max98357a.o 5531 4516 384 10431 28bf sound/soc/intel/boards/bxt_da7219_max98357a.o text data bss dec hex filename 5275 4496 384 10155 27ab sound/soc/intel/boards/bxt_rt298.o 5403 4368 384 10155 27ab sound/soc/intel/boards/bxt_rt298.o text data bss dec hex filename 10017 2344 48 12409 3079 sound/soc/intel/boards/bytcr_rt5640.o 10145 2232 48 12425 3089 sound/soc/intel/boards/bytcr_rt5640.o text data bss dec hex filename 3719 2356 0 6075 17bb sound/soc/intel/boards/bytcr_rt5651.o 3847 2244 0 6091 17cb sound/soc/intel/boards/bytcr_rt5651.o text data bss dec hex filename 3598 2392 0 5990 1766 sound/soc/intel/boards/cht_bsw_max98090_ti.o 3726 2280 0 6006 1776 sound/soc/intel/boards/cht_bsw_max98090_ti.o text data bss dec hex filename 5343 3624 16 8983 2317 sound/soc/intel/boards/cht_bsw_rt5645.o 5471 3496 16 8983 2317 sound/soc/intel/boards/cht_bsw_rt5645.o text data bss dec hex filename 4662 2592 384 7638 1dd6 sound/soc/intel/boards/cht_bsw_rt5672.o 4790 2464 384 7638 1dd6 sound/soc/intel/boards/cht_bsw_rt5672.o text data bss dec hex filename 1595 2528 0 4123 101b sound/soc/intel/boards/haswell.o 1659 2472 0 4131 1023 sound/soc/intel/boards/haswell.o text data bss dec hex filename 6272 4760 416 11448 2cb8 sound/soc/intel/boards/skl_nau88l25_max98357a.o 6464 4568 416 11448 2cb8 sound/soc/intel/boards/skl_nau88l25_max98357a.o text data bss dec hex filename 7075 4888 416 12379 305b sound/soc/intel/boards/skl_nau88l25_ssm4567.o 7267 4696 416 12379 305b sound/soc/intel/boards/skl_nau88l25_ssm4567.o text data bss dec hex filename 5659 4496 384 10539 292b sound/soc/intel/boards/skl_rt286.o 5787 4368 384 10539 292b sound/soc/intel/boards/skl_rt286.o text data bss dec hex filename 1721 2048 0 3769 eb9 sound/soc/kirkwood/armada-370-db.o 1769 1976 0 3745 ea1 sound/soc/kirkwood/armada-370-db.o text data bss dec hex filename 1363 1792 0 3155 c53 sound/soc/mxs/mxs-sgtl5000.o 1427 1728 0 3155 c53 sound/soc/mxs/mxs-sgtl5000.o Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 21 4月, 2016 1 次提交
-
-
由 Mengdong Lin 提交于
The generic ID can be used by topology: - Toplogy can create FE links and set their ID, machine drivers will be notified and check this ID for machine-specific init. - Toplogy can use the ID to find existing BE & CC links and further configure them. Signed-off-by: NMengdong Lin <mengdong.lin@linux.intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 05 1月, 2016 2 次提交
-
-
由 Pierre-Louis Bossart 提交于
based on bytcr-rt5640 with changes only on codec side Quirk logic is kept as placeholder. Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Pierre-Louis Bossart 提交于
Sound is noisy when using BCLK as reference, enable ASRC in rt5640 codec Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 19 12月, 2015 5 次提交
-
-
由 Pierre-Louis Bossart 提交于
Add dai links to enable additional playback stream with deeper buffer for lower power consumption. The normal and DEEP_buffer streams are not mutually exclusive, content will be mixed by the DSP. Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Pierre-Louis Bossart 提交于
Merge DMI quirks for various machines such as Asus T100 and clean-up code Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Pierre-Louis Bossart 提交于
first renaming and reducing delta with byt-rt5640 code before dmi-based quirks are enabled Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Pierre-Louis Bossart 提交于
initial cleanup to use same pins Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Sebastien Guiriec 提交于
Using the hw_fixup function in order to overwrite the default SSP setting for Audio DSP port connected to the codec. Instead of TDM 4ch use I2S 2ch 24 bits. Signed-off-by: NSebastien Guiriec <sebastien.guiriec@intel.com> Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 21 10月, 2015 1 次提交
-
-
由 Lars-Peter Clausen 提交于
Use the new snd_pcm_hw_constraint_single() helper function rather than installing a list constraint with a single value. Since snd_pcm_hw_constraint_single() sets a static constraint while snd_pcm_hw_constraint_list() sets a dynamic constraint the former is slightly more efficient and it also needs less code. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NVinod Koul <vinod.koul@intel.com> Acked-by: NMark Brown <broonie@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-