Add dma_mode field to ide_drive_t matching dma_mode field used in
struct ata_device.

The validity of the field is restricted to ->dma_pio_mode method
only currently in IDE subsystem.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add pio_mode field to ide_drive_t matching pio_mode field used in
struct ata_device.

The validity of the field is restricted to ->set_pio_mode method
only currently in IDE subsystem.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* preserve 80-wire cable detection bit
* don't clear UDMA settings when programming PIO/MWDMA modes
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based on commits 5955c7a2 and 7d948b11 for pata_via host driver.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based on commit e4d866cd for pata_via host driver.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add custom struct ide_tp_ops instance to fix the internal bug of some VIA
chipsets which will reset the device register after changing the nIEN bit
in the device control register.

Based on commit bfce5e01 for pata_via host driver.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add VIA_SATA_PATA flag for cx700, vx800 and vx855 chipsets
(the first port is SATA).

Based on commits 7585eb1b, bfce5e01 and e4d866cd for pata_via
host driver.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based on commit e4d866cd for pata_via host driver
(PCI ID was later changed by commit 5993856e).

Update my credits while at it.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* remove dead OSB4 UDMA support
* remove unreachable code
* make isa_dev local to ->init_chipset
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Just use the standard ide_timing_compute() helper to calculate
PIO timings.  This fixes many issues with the open-coded version
like using 16-bit timings when 8-bit ones should be used or not
accounting for the enhanced cycle time specified by the device.

Based on libata pata_cypress host driver.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Just use the standard ide_timing_compute() helper to calculate
PIO and MWDMA timings.  This fixes some issues with the open-coded
version like allowing faster MWDMA timings than the ones required
by the current PIO mode or not accounting for the enhanced MWDMA
cycle time specified by the device.

Based on libata pata_cmd64x host driver.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based on libata pata_amd host driver.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove leftover local_irq_[save,restore]() and FIXME note.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based on libata pata_ali host driver.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Just use the standard ide_timing_compute() helper to calculate
PIO timings.  This fixes many issues with the open-coded version
like potential recovery timings underclocking or not accounting
for the enhanced cycle time specified by the device.

Based on libata pata_ali host driver.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ready to get everything using unlocked_ioctl()

For ide_tape we just push down as this is legacy code anyway
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit abd6633c ("pnp: add a shutdown
method to pnp drivers") adds shutdown method to bus driver blindly.  With
it, driver->shutdown is no longer valid.

Use pnp_driver->shutdown instead.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14889Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reported-by: NMalte Schröder <maltesch@gmx.de>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: David Hardeman <david@hardeman.nu>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Cc: <stable@kernel.org>		[2.6.32.x]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

menu: use proper 64 bit math

The new menu governor is incorrectly doing a 64 bit divide.  Compile
tested only
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: <tomaz.mertelj@guest.arnes.si>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Previously enabled poll(2) support on one edge was never reconfigured when
sysfs polarity change was triggered from kernel, because 'struct device
*dev' shadowed an earlier definition.

Found by sparse, which I should've run much earlier.
Signed-off-by: NJani Nikula <ext-jani.1.nikula@nokia.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

JEDEC eMMC specification version 4.4 (MMCA 4.4) defines Extended CSD
structure versions up to 5.
Signed-off-by: NAdrian Hunter <adrian.hunter@nokia.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The main bug was that 'blk_cleanup_queue()' was called while the block
device could still be in use, for example, because the card was removed
while files were still open.

In addition, to be sure that 'mmc_request()' will get called for all new
requests (so it can error them out), the queue is emptied during cleanup.
This is done after the worker thread is stopped to avoid racing with it.

Finally, it is not a device error for this to be happening, so quiet the
(sometimes very many) error messages.
Signed-off-by: NAdrian Hunter <adrian.hunter@nokia.com>
Cc: <linux-mmc@vger.kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If mmc_blk_set_blksize() fails mmc_blk_probe() the request queue and its
thread have been set up and they need to be shut down properly before
putting the disk.
Signed-off-by: NJarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: NAdrian Hunter <adrian.hunter@nokia.com>
Cc: <linux-mmc@vger.kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a card is removed before mmc_blk_probe() has called add_disk(), then
the minor field is uninitialized and has value 0.  This caused
mmc_blk_put() to always release devidx 0 even if 0 was still in use.  Then
the next mmc_blk_probe() used the first free idx of 0, which oopses in
sysfs, since it is used by another card.
Signed-off-by: NAnna Lemehova <EXT-Anna.Lemehova@nokia.com>
Signed-off-by: NAdrian Hunter <adrian.hunter@nokia.com>
Cc: <linux-mmc@vger.kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Warning(drivers/base/power/main.c:453): No description found for parameter 'dev'
Warning(drivers/base/power/main.c:453): No description found for parameter 'cb'
Warning(drivers/base/power/main.c:719): No description found for parameter 'dev'
Warning(drivers/base/power/main.c:719): No description found for parameter 'state'
Warning(drivers/base/power/main.c:719): No description found for parameter 'cb'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Bail out if we don't find an enclosing IOC.  Previously, if we didn't
find one, we tried to set things up using garbage for the SBA/IOC register
address, which causes a crash.

This crash only happens if firmware supplies a defective ACPI namespace, so
it doesn't fix any problems in the field.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Commit 15b8dd53 changed the string in info->hardware_id from a static
array to a pointer and added a length field.  But instead of changing
"sizeof(array)" to "length", we changed it to "sizeof(length)" (== 4),
which corrupts the string we're trying to null-terminate.

We no longer even need to null-terminate the string, but we *do* need to
check whether we found a HID.  If there's no HID, we used to have an empty
array, but now we have a null pointer.

The combination of these defects causes this oops:

  Unable to handle kernel NULL pointer dereference (address 0000000000000003)
  modprobe[895]: Oops 8804682956800 [1]
  ip is at zx1_gart_probe+0xd0/0xcc0 [hp_agp]

  http://marc.info/?l=linux-ia64&m=126264484923647&w=2Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Reported-by: NÉmeric Maschino <emeric.maschino@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

While investigating a kmemleak detected leak, I encountered the
agp_add_bridge function.  It appears to be responsible for freeing
the agp_bridge_data in the case of a failure, but it is only doing
so for some errors.

Fix it to always free the bridge data if a failure condition is
encountered.
Signed-off-by: NKevin Winchester <kjwinchester@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Some upcoming G80 DMA changes will depend on this, but it's split out for
bisectibility just in case it causes some unexpected issues.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>