- 03 5月, 2007 40 次提交
-
-
由 Yaozu Dong 提交于
By checking if a reschedule is needed, we avoid dropping the vcpu. [With changes by me, based on Anthony Liguori's observations] Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Yaozu Dong 提交于
Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Intel hosts only support syscall/sysret in long more (and only if efer.sce is enabled), so only reload the related MSR_K6_STAR if the guest will actually be able to use it. This reduces vmexit cost by about 500 cycles (6400 -> 5870) on my setup. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
No meat in that file. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Some msrs are only used by x86_64 instructions, and are therefore not needed when the guest is legacy mode. By not bothering to switch them, we reduce vmexit latency by 2400 cycles (from about 8800) when running a 32-bt guest on a 64-bit host. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
THe automatically switched msrs are never changed on the host (with the exception of MSR_KERNEL_GS_BASE) and thus there is no need to save them on every vm entry. This reduces vmexit latency by ~400 cycles on i386 and by ~900 cycles (10%) on x86_64. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Usually, guest page faults are detected by the kvm page fault handler, which detects if they are shadow faults, mmio faults, pagetable faults, or normal guest page faults. However, in ceratin circumstances, we can detect a page fault much later. One of these events is the following combination: - A two memory operand instruction (e.g. movsb) is executed. - The first operand is in mmio space (which is the fault reported to kvm) - The second operand is in an ummaped address (e.g. a guest page fault) The Windows 2000 installer does such an access, an promptly hangs. Fix by adding the missing page fault injection on that path. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
This avoids -ENOMEM under memory pressure. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Better leak detection, statistics, memory use, speed -- goodness all around. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Some guests (Solaris) do not set up all four pdptrs, but leave some invalid. kvm incorrectly treated these as valid page directories, pinning the wrong pages and causing general confusion. Fix by checking the valid bit of a pae pdpte. This closes sourceforge bug 1698922. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Solaris panics if it sees a cpu with no fpu, and it seems to rely on this bit. Closes sourceforge bug 1698920. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
The expression sp - 6 < sp where sp is a u16 is undefined in C since 'sp - 6' is promoted to int, and signed overflow is undefined in C. gcc 4.2 actually warns about it. Replace with a simpler test. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Noted by Joerg Roedel. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Joerg Roedel 提交于
This patch enables the virtualization of the last branch record MSRs on SVM if this feature is available in hardware. It also introduces a small and simple check feature for specific SVM extensions. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
These are really helpful when migrating an floating point app to another machine. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
With this, we can specify that accesses to one physical memory range will be remapped to another. This is useful for the vga window at 0xa0000 which is used as a movable window into the (much larger) framebuffer. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Mapping a guest page to a host page is a common operation. Currently, one has first to find the memory slot where the page belongs (gfn_to_memslot), then locate the page itself (gfn_to_page()). This is clumsy, and also won't work well with memory aliases. So simplify gfn_to_page() not to require memory slot translation first, and instead do it internally. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Dor Laor 提交于
Functions that play around with the physical memory map need a way to clear mappings to possibly nonexistent or invalid memory. Both the mmu cache and the processor tlb are cleared. Signed-off-by: NDor Laor <dor.laor@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
On x86, bit operations operate on a string of bits that can reside in multiple words. For example, 'btsl %eax, (blah)' will touch the word at blah+4 if %eax is between 32 and 63. The x86 emulator compensates for that by advancing the operand address by (bit offset / BITS_PER_LONG) and truncating the bit offset to the range (0..BITS_PER_LONG-1). This has a side effect of forcing the operand size to 8 bytes on 64-bit hosts. Now, a 32-bit guest goes and fork()s a process. It write protects a stack page at 0xbffff000 using the 'btr' instruction, at offset 0xffc in the page table, with bit offset 1 (for the write permission bit). The emulator now forces the operand size to 8 bytes as previously described, and an innocent page table update turns into a cross-page-boundary write, which is assumed by the mmu code not to be a page table, so it doesn't actually clear the corresponding shadow page table entry. The guest and host permissions are out of sync and guest memory is corrupted soon afterwards, leading to guest failure. Fix by not using BITS_PER_LONG as the word size; instead use the actual operand size, so we get a 32-bit write in that case. Note we still have to teach the mmu to handle cross-page-boundary writes to guest page table; but for now this allows Damn Small Linux 0.4 (2.4.20) to boot. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
No longer interesting. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Use list_move() where possible. Noticed by Dor Laor. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Michal Piotrowski 提交于
Remove unused function CC drivers/kvm/svm.o drivers/kvm/svm.c:207: warning: ‘inject_db’ defined but not used Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
When a vcpu is migrated from one cpu to another, its timestamp counter may lose its monotonic property if the host has unsynced timestamp counters. This can confuse the guest, sometimes to the point of refusing to boot. As the rdtsc instruction is rather fast on AMD processors (7-10 cycles), we can simply record the last host tsc when we drop the cpu, and adjust the vcpu tsc offset when we detect that we've migrated to a different cpu. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
The kvm mmu keeps a shadow page for hugepage pdes; if several such pdes map the same physical address, they share the same shadow page. This is a fairly common case (kernel mappings on i386 nonpae Linux, for example). However, if the two pdes map the same memory but with different permissions, kvm will happily use the cached shadow page. If the access through the more permissive pde will occur after the access to the strict pde, an endless pagefault loop will be generated and the guest will make no progress. Fix by making the access permissions part of the cache lookup key. The fix allows Xen pae to boot on kvm and run guest domains. Thanks to Jeremy Fitzhardinge for reporting the bug and testing the fix. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Joerg Roedel 提交于
This patch forbids the guest to execute monitor/mwait instructions on SVM. This is necessary because the guest can execute these instructions if they are available even if the kvm cpuid doesn't report its existence. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Sergey Kiselev 提交于
Some older (~2.6.7) kernels write MCG_STATUS register during kernel boot (mce_clear_all() function, called from mce_init()). It's not currently handled by kvm and will cause it to inject a GPF. Following patch adds a "nop" handler for this. Signed-off-by: NSergey Kiselev <sergey.kiselev@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Trivial cleanup. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
The cpu cache is a host resource; the guest should not be able to turn it off (even for itself). Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
As usual, we need to mangle segment registers when emulating real mode as vm86 has specific constraints. We special case the reset segment base, and set the "access rights" (or descriptor flags) to vm86 comaptible values. This fixes reboot on vmx. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
The SET_SREGS ioctl modifies both cr0.pe (real mode/protected mode) and guest segment registers. Since segment handling is modified by the mode on Intel procesors, update the segment registers after the mode switch has taken place. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
set_cr0_no_modeswitch() was a hack to avoid corrupting segment registers. As we now cache the protected mode values on entry to real mode, this isn't an issue anymore, and it interferes with reboot (which usually _is_ a modeswitch). Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
The reset state has cs.selector == 0xf000 and cs.base == 0xffff0000, which aren't compatible with vm86 mode, which is used for real mode virtualization. When we create a vcpu, we set cs.base to 0xf0000, but if we get there by way of a reset, the values are inconsistent and vmx refuses to enter guest mode. Workaround by detecting the state and munging it appropriately. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
The initial, noncaching, version of the kvm mmu flushed the all nonglobal shadow page table translations (much like a native tlb flush). The new implementation flushes translations only when they change, rendering global pte tracking superfluous. This removes the unused tracking mechanism and storage space. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
We already special case the pdptr access, so no need to check it again. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
The current string pio interface communicates using guest virtual addresses, relying on userspace to translate addresses and to check permissions. This interface cannot fully support guest smp, as the check needs to take into account two pages at one in case an unaligned string transfer straddles a page boundary. Change the interface not to communicate guest addresses at all; instead use a buffer page (mmaped by userspace) and do transfers there. The kernel manages the virtual to physical translation and can perform the checks atomically by taking the appropriate locks. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Some ioctls ignore their arguments. By requiring them to be zero now, we allow a nonzero value to have some special meaning in the future. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
This allows us to store offsets in the kernel/user kvm_run area, and be sure that userspace has them mapped. As offsets can be outside the kvm_run struct, userspace has no way of knowing how much to mmap. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Allow a special signal mask to be used while executing in guest mode. This allows signals to be used to interrupt a vcpu without requiring signal delivery to a userspace handler, which is quite expensive. Userspace still receives -EINTR and can get the signal via sigwait(). Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Older userspace didn't care, but newer userspace (with the cpuid changes) does. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-