- 08 7月, 2005 9 次提交
-
-
由 Hartmut Hackmann 提交于
Fix limit for firmware version check was too low for tda10045. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hartmut Hackmann 提交于
o added config options for IF frequency and AGC o support DSP boot from on board eeprom o added pll sleep call Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew de Quincey 提交于
Remove I2C_DRIVERID_DVBFE_ cruft. Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Beutner 提交于
- remove void casts - not necessary to set filter state twice to STATE_FREE during dvb_dmxdev_init() Signed-off-by: NPeter Beutner <p.beutner@gmx.net> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Beutner 提交于
In dvb_dmxdev_filter_start if we go out because of an error, release previously allocated demux_feed. Signed-off-by: NPeter Beutner <p.beutner@gmx.net> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew de Quincey 提交于
Add workaround for signal lock loss issue, where the frontend loses the signal after some hours without any visible reason. Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Beutner 提交于
Fix a race condition where an application which issued a FE_READ_STATUS ioctl directly after FE_SET_FRONTEND would see an old status, i.e. FE_READ_STATUS would be executed before the frontend thread has even seen the tungin request from FE_SET_FRONTEND. Signed-off-by: NPeter Beutner <p.beutner@gmx.net> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
Remove the skystar2 driver which has been obsoleted by the generalized flexcop-pci driver. Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Martin Loschwitz 提交于
Fixed litte/big-endian conversion for raw remote-control keys. Signed-off-by: NMartin Loschwitz <madkiss@madkiss.org> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 7月, 2005 1 次提交
-
-
由 Eddie C. Dost 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 6月, 2005 2 次提交
-
-
由 Mauro Carvalho Chehab 提交于
* bttv-driver.c, bttvp.h: - New bttv module params: - uv_ratio : allow a ratio of saturation between u and v. If you have a ratio of 40 and a saturation of 100, usat will be 80 and vstat 120. Useful to correct a bad color balance. - full_luma_range : provide a better contrast in using the full range 0-253 of values instead of 16-253. - coring : to have a better black level. - radio range is now defined on tuner-core.c. Cleaning up. * bttvp.h: - Fix gcc 4.0 compilation Signed-off-by: NJorik Jonker <jorik@dnd.utwente.nl> Signed-off-by: NSylvain Meyer <sylvain.meyer@worldonline.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NNickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
*tuner-core.c: - some tuner_info msgs will be generated only if insmod opt tuner_debug enabled. - Implemented tuner-core support for VIDIO_S_TUNER to allow changing mono/stereo mode - Remove unneeded config options. - I2C_CLIENT_MULTI option removed. - support for Philips FMD12ME hybrid tuner - allow to initialize with another tuner - Move PHILIPS_FMD initialization code to set_type function, * tda8290: - Fix dumb error in tda8290 tunning. - Radio tuner uses high-precision step instead of 62.5 KHz. *tea5767.c: - tuner_info msgs will be generated only if insmod tuner option tuner_debug enabled. - some cleanups for better reading. - Radio tuner uses high-precision step instead of 62.5 KHz. - Changing radio mode stereo/mono for tea5767 working. *tuner-simple.c: - TNF9533-D/IF UHF fixup. - Radio tuners now uses high-precision step instead of 62.5 KHz. *mt20xx.c: - Radio tuner uses high-precision step instead of 62.5 KHz. *tda9887.c: - tab and blank spaces corrections. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NGerd Knorr <kraxel@bytesex.org> Signed-off-by: NNickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 6月, 2005 1 次提交
-
-
由 Dave Jones 提交于
CONFIG_CONFIG_TUNER_MULTI_I2C probably isn't what the author meant to create. Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 26 6月, 2005 2 次提交
-
-
由 Christoph Lameter 提交于
1. Establish a simple API for process freezing defined in linux/include/sched.h: frozen(process) Check for frozen process freezing(process) Check if a process is being frozen freeze(process) Tell a process to freeze (go to refrigerator) thaw_process(process) Restart process frozen_process(process) Process is frozen now 2. Remove all references to PF_FREEZE and PF_FROZEN from all kernel sources except sched.h 3. Fix numerous locations where try_to_freeze is manually done by a driver 4. Remove the argument that is no longer necessary from two function calls. 5. Some whitespace cleanup 6. Clear potential race in refrigerator (provides an open window of PF_FREEZE cleared before setting PF_FROZEN, recalc_sigpending does not check PF_FROZEN). This patch does not address the problem of freeze_processes() violating the rule that a task may only modify its own flags by setting PF_FREEZE. This is not clean in an SMP environment. freeze(process) is therefore not SMP safe! Signed-off-by: NChristoph Lameter <christoph@lameter.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
static declaration of cx88_pci_irqs follows non-static. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 6月, 2005 22 次提交
-
-
由 Adrian Bunk 提交于
Another rollup of patches which give various symbols static scope Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
This patch is necessary to correct I2C detect after normal_i2c_range removal in gregkh-i2c-i2c-address_range_removal.patch. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
This patch adds support for various SAA7134 cards and brings some fixes. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NFabrice Aeschbacher <fabrice.aeschbacher@laposte.net> Signed-off-by: Hermann Pitton <hermann.pitton@onlinehome.de>. Signed-off-by: NNickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
Tuner improvements and additions. TEA5767 FM tuner added. Several small fixes. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NNickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
This patch adds support for various CX88 cards and allows specifying card addresses. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: Ncybercide@f2s.com <cybercide@f2s.com> Signed-off-by: NCatalin Climov <catalin@climov.com> Signed-off-by: NNickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
This patch synchronizes current bttv support on V4L with linux kernel and adds support to Adlink RTV24 card. It is asked that *every* patch to V4L stuff to be first submitted to video4linux-list@redhat.com. From: "J.A. Magallon" <jamagallon@able.es> struct bttv defined after usage. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NPeter Skipworth <pskipworth@clarityvi.com> Signed-off-by: NNickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Krufky 提交于
Add support for tuner#60: Thomson DDT 7611 (ATSC/NTSC) Change tuner in card#28 (DViCO FusionHDTV3 Gold-T) from tuner=52 (Tuner Thomson DDT 7610) to tuner=60 (Tuner Thomson DDT 7611) Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Krufky 提交于
Even though it says DViCO FusionHDTV3 Gold-Q on the box, Gold-T is printed on the card. This fix corrects the error in all places, and corrects the tuner name Thomson DDT 7611 (ATSC/NTSC) in the documentation. This applies against 2.6.12-rc5-mm2 after applying Manueal Capinha's patch "Add support for PixelView Ultra Pro in v4l" (because of the change from card=27 to card=28) Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Manuel Capinha 提交于
The following patch adds support for the PixelView Ultra Pro video capture card in v4l. - It removes the remote control key definitions from ir-kbd-gpio.c and moves them to ir-common.c so that they can be shared between bt878 and cx88 based cards. - The patch also moves the FUSIONHDTV_3_GOLD_Q card from number 27 to 28 to regain compatibility with the V4L cvs. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
This patch fixes PAL-M chroma subcarrier frequency (FSC) to its correct value of 3.5756115 MHz and adjusts horizontal total samples for PAL-M, according with formula Line Draw Time / (4*FSC). Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Cc: <video4linux-list@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Schimek 提交于
This patch fixes NTSC VBI capturing in the saa7134 driver. Signed-off-by: NMichael H. Schimek <mschimek@gmx.at> Cc: <video4linux-list@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Skipworth 提交于
The bttv module currently lacks support for the Adlink RTV24 capture card. The following patch adds support for the Adlink RTV24 video capture card to the bttv module. Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Krufky 提交于
This patch allows full analog functionality for the DViCO FusionHDTV3 Gold-Q, 18ac:d820 which has a Conexant cx23882, Thompson7611, and LG 3202. It does NOT yet support digital decoding or digital audio without the internal analog audio jack connected to the sound board, but it works perfectly in analog mode. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
VIDEO_CX88_DVB must select DVB_CX22702 (due to its cx22702_attach usage). This patch fixes kernel Bugzilla #4594 (http://bugzilla.kernel.org/show_bug.cgi?id=4594). Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
> - *ptr = sg_dma_address(list) - list->offset; > + *ptr = cpu_to_le32(sg_dma_address(list) - list->offset); Clearly mark pointers to little-endian things. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Acked-by: NGerd Knorr <kraxel@bytesex.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Gerd Knorr 提交于
Fix byteorder bug in the saa7134 driver. With that ObviouslyCorrect[tm] patch applied the driver reportly works on powerpc. Signed-off-by: NGerd Knorr <kraxel@bytesex.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
tuner-core.c, tuner.h: - tuner-core changed to support multiple I2C devices used on some adapters; - Kconfig now has an option (CONFIG_TUNER_MULTI_I2C) to enable this new behavor; - By default, even enabling CONFIG_TUNER_MULTI_I2C, tuner-core emulates the old behavor, using first I2C device for both FM and TV; - There is a new i2c command (TUNER_SET_ADDR) to allow tuner clients to select I2C address for FM or TV tuner; - Tuner I2C dettach now generates a warning on syslog if failed. tuner-simple.c: - TVision TVF-8531MF and TVF-5533 MF tuner included. It uses, by default, I2C on 0xC2 address for TV and on 0xC0 for Radio. Both TV and FM Radio mode are working. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
Added support for the Broadcom BCM3510 ATSC (8VSB/16VSB & ITU J83 AnnexB FEC QAM64/256) demodulator used in the first generation of Air2PC ATSC PCI-cards/USB-boxes made by B2C2. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
Use time_after() macro. Signed-off-by: NMarcelo Feitoza Parisi <marcelo@feitoza.com.br> Signed-off-by: NDomen Puncer <domen@coderock.org> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
Fix error checking during initialization. Thanks to Gerolf Wendland for discovering. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
Add generalized dvb-usb driver which supports a wide variety of devices. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
Remove the dibusb driver which has been obsoleted by the generalized dvb-usb driver. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 22 6月, 2005 2 次提交
-
-
由 Jean Delvare 提交于
On top of my previous patch which removes the use of address ranges in video i2c drivers, this one can save an additional few bytes of memory. Most of these drivers which do not use I2C_CLIENT_INSMOD initialize the unused address lists in a less than optimal way. This patch simply optimizes this, by using a single one-element list instead of 3 different lists with two elements each. This saves an average 63 bytes on these drivers. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> diff -ruN linux-2.6.12-rc1-bk5.orig/drivers/media/video/adv7170.c linux-2.6.12-rc1-bk5/drivers/media/video/adv7170.c
-
由 Jean Delvare 提交于
Some months ago, you killed the address ranges mechanism from all sensors i2c chip drivers (both the module parameters and the in-code address lists). I think it was a very good move, as the ranges can easily be replaced by individual addresses, and this allowed for significant cleanups in the i2c core (let alone the impressive size shrink for all these drivers). Unfortunately you did not do the same for non-sensors i2c chip drivers. These need the address ranges even less, so we could get rid of the ranges here as well for another significant i2c core cleanup. Here comes a patch which does just that. Since the process is exactly the same as what you did for the other drivers set already, I did not split this one in parts. A documentation update is included. The change saves 308 bytes in the i2c core, and an average 1382 bytes for chip drivers which use I2C_CLIENT_INSMOD, 126 bytes for those which do not. This change is required if we want to merge the sensors and non-sensors i2c code (and we want to do this). Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/Documentation/i2c/writing-clients ===================================================================
-
- 21 6月, 2005 1 次提交
-
-
由 gregkh@suse.de 提交于
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-