- 08 8月, 2017 22 次提交
-
-
由 David Ahern 提交于
Add a second device index, sdif, to inet socket lookups. sdif is the index for ingress devices enslaved to an l3mdev. It allows the lookups to consider the enslaved device as well as the L3 domain when searching for a socket. TCP moves the data in the cb. Prior to tcp_v4_rcv (e.g., early demux) the ingress index is obtained from IPCB using inet_sdif and after the cb move in tcp_v4_rcv the tcp_v4_sdif helper is used. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Add a second device index, sdif, to udp socket lookups. sdif is the index for ingress devices enslaved to an l3mdev. It allows the lookups to consider the enslaved device as well as the L3 domain when searching for a socket. Early demux lookups are handled in the next patch as part of INET_MATCH changes. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'wireless-drivers-next-for-davem-2017-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.14 The first wireless-drivers-next pull request for 4.14. I'm submitting this unusally late in the cycle as my vacation postponed this. But even if this is late there's not still that much new features, mostly cleanup or fixes. Major changes: ath10k * preparation for wcn3990 support iwlwifi * Reorganization of the code into separate directories continues qtnfmac * regulatory support updates * add get_channel, dump_survey and channel_switch cfg80211 handlers ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
Without CONFIG_PCI_IOV, we get a harmless warning about an unused function: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:2273:13: error: 'hclge_disable_sriov' defined but not used [-Werror=unused-function] The #ifdefs in this driver are obviously wrong, so this just removes them and uses an IS_ENABLED() check that does the same thing correctly in a more readable way. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux由 David S. Miller 提交于
Saeed Mahameed says: ==================== mlx5-shared-2017-08-07 This series includes some mlx5 updates for both net-next and rdma trees. From Saeed, Core driver updates to allow selectively building the driver with or without some large driver components, such as - E-Switch (Ethernet SRIOV support). - Multi-Physical Function Switch (MPFs) support. For that we split E-Switch and MPFs functionalities into separate files. From Erez, Delay mlx5_core events when mlx5 interfaces, namely mlx5_ib, registration is taking place and until it completes. From Rabie, Increase the maximum supported flow counters. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jiri Pirko says: ==================== net: sched: summer cleanup part 2, ndo_setup_tc This patchset focuses on ndo_setup_tc and its args. Currently there are couple of things that do not make much sense. The type is passed in struct tc_to_netdev, but as it is always required, should be arg of the ndo. Other things are passed as args but they are only relevant for cls offloads and not mqprio. Therefore, they should be pushed to struct. As the tc_to_netdev struct in the end is just a container of single pointer, we get rid of it and pass the struct according to type. So in the end, we have: ndo_setup_tc(dev, type, type_data_struct) There are couple of cosmetics done on the way to make things smooth. Also, reported error is consolidated to eopnotsupp in case the asked offload is not supported. v1->v2: - added forgotten hns3pf bits ==================== Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Get rid of struct tc_to_netdev which is now just unnecessary container and rather pass per-type structures down to drivers directly. Along with that, consolidate the naming of per-type structure variables in cls_*. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Change the return value from -EINVAL to -EOPNOTSUPP. The rest of the drivers have it like that, so be aligned. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
prio is not cls_flower specific, but it is meaningful for all classifiers. Seems that only mlxsw cares about the value. Obviously, cls offload in other drivers is broken. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
As ndo_setup_tc is generic offload op for whole tc subsystem, does not really make sense to have cls-specific args. So move them under cls_common structurure which is embedded in all cls structs. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Similar to the rest offloaders of mqprio, no need to check handle. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Change the flows a bit in preparation of follow-up changes in ndo_setup_tc args. Also, change the error code to align with the rest of the drivers. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Let dsa_slave_setup_tc be a splitter for specific setup_tc types and push out cls_matchall specific code into a separate function. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
To sync-up with the naming in the rest of the driver, rename the cls arg. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Let mlxsw_sp_setup_tc be a splitter for specific setup_tc types and push out cls_flower and cls_matchall specific codes into separate functions. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Let mlx5e_rep_setup_tc (former mlx5e_rep_ndo_setup_tc) be a splitter for specific setup_tc types and push out cls_flower specific code into a separate function. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Let mlx5e_setup_tc (former mlx5e_ndo_setup_tc) be a splitter for specific setup_tc types and push out cls_flower and mqprio specific codes into separate functions. Also change the return values so they are the same as in the rest of the drivers. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Let __ixgbe_setup_tc be a splitter for specific setup_tc types and push out cls_u32 and mqprio specific codes into separate functions. Also change the return values so they are the same as in the rest of the drivers. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Let cxgb_setup_tc be a splitter for specific setup_tc types and push out cls_u32 specific code into a separate function. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Since this is specific to flower now, make it part of the flower offload struct. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
In order to be aligned with the rest of the types, rename TC_SETUP_MATCHALL to TC_SETUP_CLSMATCHALL. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Since the type is always present, push it to be a separate argument to ndo_setup_tc. On the way, name the type enum and use it for arg type. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 8月, 2017 18 次提交
-
-
由 Rabie Loulou 提交于
Read new NIC capability field which represnts 16 MSBs of the max flow counters number supported (max_flow_counter_31_16). Backward compatibility with older firmware is preserved, the modified driver reads max_flow_counter_31_16 as 0 from the older firmware and uses up to 64K counters. Changed flow counter id from 16 bits to 32 bits. Backward compatibility with older firmware is preserved as we kept the 16 LSBs of the counter id in place and added 16 MSBs from reserved field. Changed the background bulk reading of flow counters to work in chunks of at most 32K counters, to make sure we don't attempt to allocate very large buffers. Signed-off-by: NRabie Loulou <rabiel@mellanox.com> Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Rabie Loulou 提交于
The counter list hardware structure doesn't contain a clear and num_of_counters fields, remove them. These wrong fields were never used by the driver hence no other driver changes. Fixes: a351a1b0 ("net/mlx5: Introduce bulk reading of flow counters") Signed-off-by: NRabie Loulou <rabiel@mellanox.com> Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Erez Shitrit 提交于
When mlx5_ib registers itself to mlx5_core as an interface, it will call mlx5_add_device which will call mlx5_ib interface add callback, in case the latter successfully returns, only then mlx5_core will add it to the interface list and async events will be forwarded to mlx5_ib. Between mlx5_ib interface add callback and mlx5_core adding the mlx5_ib interface to its devices list, arriving mlx5_core events can be missed by the new mlx5_ib registering interface. In other words: thread 1: mlx5_ib: mlx5_register_interface(dev) thread 1: mlx5_core: mlx5_add_device(dev) thread 1: mlx5_core: ctx = dev->add => (mlx5_ib)->mlx5_ib_add thread 2: mlx5_core_event: **new event arrives, forward to dev_list thread 1: mlx5_core: add_ctx_to_dev_list(ctx) /* previous event was missed by the new interface.*/ It is ok to miss events before dev->add (mlx5_ib)->mlx5_ib_add_device but not after. We fix this race by accumulating the events that come between the ib_register_device (inside mlx5_add_device->(dev->add)) till the adding to the list completes and fire them to the new registering interface after that. Fixes: f1ee87fe ("net/mlx5: Organize device list API in one place") Signed-off-by: NErez Shitrit <erezsh@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Saeed Mahameed 提交于
Allow to selectively build the driver with or without sriov eswitch, VF representors and TC offloads. Also remove the need of two ndo ops structures (sriov & basic) and keep only one unified ndo ops, compile out VF SRIOV ndos when not needed (MLX5_ESWITCH=n), and for VF netdev calling those ndos will result in returning -EPERM. Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com> Cc: Jes Sorensen <jsorensen@fb.com> Cc: kernel-team@fb.com
-
由 Saeed Mahameed 提交于
Multi-Physical Function Switch (MPFs) is required for when multi-PF configuration is enabled to allow passing user configured unicast MAC addresses to the requesting PF. Before this patch eswitch.c used to manage the HW MPFS l2 table, E-Switch always (regardless of sriov) enabled vport(0) (NIC PF) vport's contexts update on unicast mac address list changes, to populate the PF's MPFS L2 table accordingly. In downstream patch we would like to allow compiling the driver without E-Switch functionalities, for that we move MPFS l2 table logic out of eswitch.c into its own file, and provide Kconfig flag (MLX5_MPFS) to allow compiling out MPFS for those who don't want Multi-PF support. NIC PF netdevice will now directly update MPFS l2 table via the new MPFS API. VF netdevice has no access to MPFS L2 table, so E-Switch will remain responsible of updating its MPFS l2 table on behalf of its VFs. Due to this change we also don't require enabling vport(0) (PF vport) unicast mac changes events anymore, for when SRIOV is not enabled. Which means E-Switch is now activated only on SRIOV activation, and not required otherwise. Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Cc: Jes Sorensen <jsorensen@fb.com> Cc: kernel-team@fb.com
-
由 Saeed Mahameed 提交于
Expose MLX5_VPORT_MANAGER macro to check for strict vport manager E-switch and MPFS (Multi Physical Function Switch) abilities. VPORT manager must be a PF with an ethernet link and with FW advertised vport group manager capability Replace older checks with the new macro and use it where needed in eswitch.c and mlx5e netdev eswitch related flows. The same macro will be reused in MPFS separation downstream patch. Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Saeed Mahameed 提交于
Remove redundant call to unregister vport representor in mlx5e_add error flow. Hide the representor priv and eswitch internal structures from en_main.c as preparation step for downstream patches which would allow building the driver without support for representors and eswitch. Fixes: 6f08a22c ("net/mlx5e: Register/unregister vport representors on interface attach/detach") Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
-
由 Saeed Mahameed 提交于
Since we are going to allow building the driver without eswitch support, it would be possible to compile out the sriov netdevice ops struct such that the basic ops instance will be used for non VF devices too. Add missing udp tunnel ndos into mlx5e_netdev_ops_basic. While here, rearrange some ndos in the sriov ops struct and put vf/eswitch related ndos towards the end of it. Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
-
由 David S. Miller 提交于
Xin Long says: ==================== sctp: remove typedefs from structures part 5 As we know, typedef is suggested not to use in kernel, even checkpatch.pl also gives warnings about it. Now sctp is using it for many structures. All this kind of typedef's using should be removed. This patchset is the part 5 to remove all typedefs in include/net/sctp/constants.h. Just as the part 1-4, No any code's logic would be changed in these patches, only cleaning up. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_subtype_t, and replace with union sctp_subtype in the places where it's using this typedef. Note that it doesn't fix many indents although it should, as sctp_disposition_t's removal would mess them up again. So better to fix them when removing sctp_disposition_t in later patch. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_event_t, and replace with enum sctp_event in the places where it's using this typedef. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_event_timeout_t, and replace with enum sctp_event_timeout in the places where it's using this typedef. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_event_other_t, and replace with enum sctp_event_other in the places where it's using this typedef. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_event_primitive_t, and replace with enum sctp_event_primitive in the places where it's using this typedef. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_state_t, and replace with enum sctp_state in the places where it's using this typedef. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_ierror_t, and replace with enum sctp_ierror in the places where it's using this typedef. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_xmit_t, and replace with enum sctp_xmit in the places where it's using this typedef. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_sock_state_t, and replace with enum sctp_sock_state in the places where it's using this typedef. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-