- don't show kernel backtrace when the allocation of the buffers fails: the
  normal ivtv/cx18 messages are clear enough and the backtrace scares users.
- fix cleanup after the buffer allocation fails (caused kernel panic).
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fix compile warnings if MODULE is not defined.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fix conflict with cx18 driver.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Since:
1) FW_LOADER is defined as:

config FW_LOADER
        tristate "Userspace firmware loading support"
        depends on HOTPLUG

2) several V4L/DVB driver just selects it;

3) select is not smart enough to auto-select HOTPLUG, if select FW_LOADER.

So, All drivers that select FW_LOADER should also depend on HOTPLUG.

An easier solution (for the end-user perspective) would be to "select HOTPLUG".
However, live is not simple. This would cause recursive dependency issues like
this one:

drivers/usb/Kconfig:62:error: found recursive dependency: USB -> USB_OHCI_HCD
-> I2C -> MEDIA_TUNER -> MEDIA_TUNER_XC2028 -> HOTPLUG -> PCCARD -> PCMCIA ->
USB_ARCH_HAS_HCD -> MOUSE_APPLETOUCH -> USB
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

cx88 doesn't need support for FW_LOADER. Instead, this is required only for
cx88-blackbird.

Also, cx88-blackbird depends on HOTPLUG, due to FW_LOADER dependency.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

em28xx-dvb doesn't need FW_LOADER. Instead, tuner-xc2028 needs to select
FW_LOADER.

Also, this can happen only if HOTPLUG is selected, since FW_LOADER
is dependent on HOTPLUG.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Since all tuners are dependent of I2C, move I2C dependency to MEDIA_TUNER.
Also, simplifies the dependencies for the other Kconfig items.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

VIDEO_TUNER is responsible for compilation of tuners.ko module. This were the
previous behaviour before the creation of MEDIA_TUNER.

Before this patch, tuner.ko were created even for drivers that don't need a
tuner (like webcam drivers).
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Only show debug from tda18271_set_standby_mode if DBG_ADV is set.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Abort rf band calibration loop for the TDA18271HD/C2 if an error is detected.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

fix error handling in tda18271c2_rf_cal_init immediate path
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

x86.git testing found the following build bug in v2.6.26-rc1:

  drivers/built-in.o: In function `cinergyt2_probe':
  cinergyT2.c:(.text+0xb6117): undefined reference to `input_allocate_device'
  cinergyT2.c:(.text+0xb6230): undefined reference to `input_register_device'
  cinergyT2.c:(.text+0xb623d): undefined reference to `input_free_device'

with the following config:

  http://redhat.com/~mingo/misc/config-Sun_May__4_22_06_54_CEST_2008.bad

The reason for the bug is that the cinergyT2 driver depends on
CONFIG_INPUT functionality, but if INPUT is modular it's still possible
to build CONFIG_DVB_CINERGYT2=y - which leads to missing symbols.

The solution is to make DVB_CINERGYT2 dependent on INPUT.

[ This solves the build problem - i have not tested the driver on this card. ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fix undefined references in au0828:
  depends on USB and select VIDEO_TVEEPROM
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

x86.git testing found the following build failure in v2.6.26-rc1:

  MODPOST 424 modules
  ERROR: "tveeprom_hauppauge_analog" [drivers/media/video/au0828/au0828.ko] undefined!
  ERROR: "tveeprom_read" [drivers/media/video/au0828/au0828.ko] undefined!

with this config:

  http://redhat.com/~mingo/misc/config-Sat_May__3_22_28_58_CEST_2008.bad

this patch does what other video drivers do to utilize the
VIDEO_TVEEPROM functionality (and this resolves the build problem) - but
i have not checked it on real hardware and i have not checked whether
the fix is complete.

selections, so some items might still be missing - just not triggered
with this specific config.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fix the following build error:

drivers/built-in.o: In function `xc_load_fw_and_init_tuner':
xc5000.c:(.text+0x2dacd): undefined reference to `request_firmware'
xc5000.c:(.text+0x2daf0): undefined reference to `release_firmware'
xc5000.c:(.text+0x2db85): undefined reference to `release_firmware'
make[1]: *** [.tmp_vmlinux1] Error 1
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This change addresses kernel bug #10459: In kernel 2.6.25 the
budget_av driver polls for an CI slot in 100ms intervals (because no
interrupt solution for budget_av cards is feasible due to HW reasons).
If no CI/CAM is connected to the DVB card, polling times out only after 250ms.
This periodic polling leads to high CPU load.

The change increases the polling interval for empty slots from 100ms to 5s.
Intervals for remaining slot states (invalid, in progress, ready) are unchanged,
as they are either temporary conditions or no timeout should occur.
Signed-off-by: NRobert Schedel <r.schedel@yahoo.de>
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The cx23885 driver used to use dvb-pll for LG-TDVS-H064F support on the
FusionHDTV5 Express.  This has since been converted to use tuner-simple
instead, once digital tuning support was added to tuner-simple.

Since cx23885 no longer uses dvb-pll, remove the #include "dvb-pll.h",
and the DVB_PLL Kconfig selection.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This driver uses some sysfs helper functions that are available only for legacy
drivers. It also requires linux/mm.h.

This patch fixes compiliation when not in compat mode.

Thanks to Ingo Molnar for identifying this issue.
Acked-by: NJaime Velasco Juan <jsagarribay@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Both mt9v022 and mt9m001 cameras are controlled over the I2C bus.
Respectively, their drivers require I2C to be built successfully.
Thanks to Ingo Molnar for reporting the build-breakage.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Thanks to Ingo Molnar for finding this.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

As pointed by Andrew Morton, the error testing were wrong. After reviewing
tea5767, it were returning a positive value for errors.

So, the double errors were cancelling each other.

This patch fix it properly. It also considers any positive value as ok, on
tuner-core.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

As reported by Mike Galbraith <efault@gmx.de>:

[   13.666587] TUNER: Unable to find symbol tda829x_probe()
[   13.674638] tuner' 1-004b: chip found @ 0x96 (saa7133[0])
[   13.691175] DVB: Unable to find symbol tda9887_attach()
[   13.698968] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[   13.709509] IP: [<ffffffff80302934>] strlcpy+0x11/0x36
[   13.711135] PGD be167067 PUD be140067 PMD 0
[   13.711137] Oops: 0000 [1] SMP
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Before this patch, an error at tuner or diseqc were discarded by the driver.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Because it goes BUG.
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] qla1280: Fix queue depth problem
  [SCSI] aha152x: Fix oops on module removal
  [SCSI] aha152x: fix init suspiciously returned 1, it should follow 0/-E convention
  [SCSI] libiscsi regression in 2.6.25: fix setting of recv timer
  [SCSI] libiscsi regression in 2.6.25: fix nop timer handling
  [SCSI] gdth: fix Error: Driver 'gdth' is already registered, aborting...
  [SCSI] gdth: fix timer handling

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  ACPI/PCI: another multiple _OSC memory leak fix
  x86/PCI: X86_PAT & mprotect
  PCI: enable nv_msi_ht_cap_quirk for ALi bridges
  PCI: Make the intel-iommu_wait_op macro work when jiffies are not running
  ACPI/PCI: handle multiple _OSC
  ACPI/PCI: handle multiple _OSC
  x86/PCI: fix broken ISA DMA
  PCI ACPI: fix uninitialized variable in __pci_osc_support_set

The qla1280 driver was ANDing the output value of mailbox register
0 with (1 << target-number) to determine whether to enable queueing
on the target in question.

But mailbox register 0 has the status code for the mailbox command
(in this case, Set Target Parameters).  Potential values are:
/*
 * ISP mailbox command complete status codes
 */

So clearly that is in error.  I can't think what the author of that
line was looking for in a mailbox register, so I just eliminated the
AND.  flag is used later in the function, and I think that the later
usage was also wrong, though it was used to set values that aren't
used.  Oh well, an overhaul of this driver is not what I want to do
now -- just a bugfix.

After the fix, I found that my disks were getting a queue depth of
255, which is far too many.  Most SCSI disks are limited to 32 or
64.  In any case, there's no point, queueing up a bunch of commands
to the adapter that will just result in queue full or starve other
targets from being issued commands due to running out of internal
memory.  So I dropped default queue depth to 32 (from which 1 is
subtracted elsewhere, giving net of 31).

I tested with a Seagate ST336753LC, and results look good, so
I'm satisfied with this patch.
Signed-off-by: NJeremy Higdon <jeremy@sgi.com>
Acked-by: NJes Sorensen <jes@sgi.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

The acpi_query_osc() function can be called for the ACPI object that
doesn't have _OSC method. In this case, acpi_get_osc_data() would
allocate a useless memory region. To avoid this, we need to check the
existence of _OSC before calling acpi_get_osc_data() in acpi_query_osc().
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Some versions of X used the mprotect workaround to change caching type from UC
to WB, so that it can then use mtrr to program WC for that region [1].  Change
the mmap of pci space through /sys or /proc interfaces from UC to UC_MINUS.
With this change, X will not need to use mprotect workaround to get WC type
since the MTRR mapping type will be honored.

The bug in mprotect that clobbers PAT bits is fixed in a follow on patch. So,
this X workaround will stop working as well.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>