- 19 2月, 2008 32 次提交
-
-
由 Sam Ravnborg 提交于
I suggest to make the vdso_install step independent as in following patch. This solves the issue at ahnd and still gives us the posibility to install the files should they be needed. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
change back the IO delay to 0x80. Alan says that 0xed is known to break some older boxes, and given that the get-rid-of-outb-APIs efforts are well underway we should just let them be finished. Signed-off-by: NIngo Molnar <mingo@elte.hu> Acked-by: NAlan Cox <alan@redhat.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Cyrill Gorcunov 提交于
Though we use PDA for regular task stack but that is not acceptable for init_task wich is special one. We still have to allocate init_task's stack in that manner. Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Cyrill Gorcunov 提交于
It's much better to use PAGE_SIZE then magic 4096 (though it's almost synonym in most cases on x86 but not for *all* cases ;) Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Cyrill Gorcunov 提交于
By including <asm/processor-flags.h> we're allowed to use X86_CR4_PGE instead of numeric constant. md5 sums of compiled files are differ due to this inclusion but .text section remains the same. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Marcin Slusarz 提交于
fix print_cpu_info, because it produced on boot: CPU: <6>AMD Athlon(tm) 64 Processor 3200+ stepping 00 instead of: CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 00 (broken since 04e1ba85 - x86: cleanup kernel/setup_64.c) Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
no code changed: arch/x86/lib/csum-wrappers_64.o: text data bss dec hex filename 839 0 0 839 347 csum-wrappers_64.o.before 839 0 0 839 347 csum-wrappers_64.o.after md5: b31994226c33e0b52bef5a0e110b84b0 csum-wrappers_64.o.before.asm b31994226c33e0b52bef5a0e110b84b0 csum-wrappers_64.o.after.asm Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Paolo Ciarrocchi 提交于
no code changed: arch/x86/lib/csum-wrappers_64.o: text data bss dec hex filename 839 0 0 839 347 csum-wrappers_64.o.before 839 0 0 839 347 csum-wrappers_64.o.after md5: b31994226c33e0b52bef5a0e110b84b0 csum-wrappers_64.o.before.asm b31994226c33e0b52bef5a0e110b84b0 csum-wrappers_64.o.after.asm Signed-off-by: NPaolo Ciarrocchi <paolo.ciarrocchi@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Paolo Ciarrocchi 提交于
This simple patch makes the file error free (according to checkpatch.pl) no code changed: arch/x86/lib/io_64.o: text data bss dec hex filename 308 0 0 308 134 io_64.o.before 308 0 0 308 134 io_64.o.after md5: 3c64f9ed83d091678e849b36ca27bee3 io_64.o.before.asm 3c64f9ed83d091678e849b36ca27bee3 io_64.o.after.asm Signed-off-by: NPaolo Ciarrocchi <paolo.ciarrocchi@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Sam Ravnborg 提交于
Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Sam Ravnborg 提交于
initial_code are initially used to hold a function pointer from __init and later from __cpuinit. This confuses modpost and changing initial_code to REFDATA silence the warning. (But now we do not discard the variable anymore). Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Sam Ravnborg 提交于
reserve_hotadd() are only used by __init acpi_numa_memory_affinity_init(). Annotate reserve_hotadd() with __init is the trivial fix. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Sam Ravnborg 提交于
arch_register_cpu() is only defined for HOTPLUG_CPU code so simple fix is to ignore references by annotating the function __ref. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Sam Ravnborg 提交于
srat_detect_node() is only used by __cpuinit init_intel(). So the trivial fix is to annotate srat_detect_node() with __cpuinit. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Sam Ravnborg 提交于
nearby_node() were only used by __cpuinit amd_detect_cmp() So annotating nearby_node() __cpuinit was the trivial fix. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Li Zefan 提交于
arch/x86/kernel/nmi_64.c:50: warning: 'unknown_nmi_panic_callback' declared 'static' but never defined This patch also fixes nmi_32.c Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andi Kleen 提交于
New implementation does not use lru for anything so there is no need to reject pages that are in the LRU. Similar for compound pages (which were checked because they also use page->lru) [ tglx@linutronix.de: removed unused variable ] Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Adrian Bunk 提交于
Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: hpa@zytor.com Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Adrian Bunk 提交于
Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: hpa@zytor.com Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Adrian Bunk 提交于
Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: hpa@zytor.com Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Adrian Bunk 提交于
Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Roland McGrath <roland@redhat.com> Cc: hpa@zytor.com Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Harvey Harrison 提交于
Yes, it should. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Harvey Harrison 提交于
arch/x86/kernel/efi_32.c:42:6: warning: symbol 'efi_call_phys_prelog' was not declared. Should it be static? arch/x86/kernel/efi_32.c:84:6: warning: symbol 'efi_call_phys_epilog' was not declared. Should it be static? Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Harvey Harrison 提交于
arch/x86/kernel/kprobes.c:584:16: warning: symbol 'kretprobe_trampoline_holder' was not declared. Should it be static? arch/x86/kernel/kprobes.c:676:6: warning: symbol 'trampoline_handler' was not declared. Should it be static? Make them static and add the __used attribute, approach taken from the arm kprobes implementation. kretprobe_trampoline_holder uses inline assemly to define the global symbol kretprobe_trampoline, but nothing ever calls the holder explicitly. trampoline handler is only called from inline assembly in the same file, mark it used and static. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Acked-by: NMasami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Adrian Bunk 提交于
This patch removes the mca-pentium boot option that was a noop. besides the source code cleanup factor, this saves some text as well: arch/x86/kernel/cpu/bugs.o: text data bss dec hex filename 651 77 4 732 2dc bugs.o.before 631 53 4 688 2b0 bugs.o.after Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Rusty Russell 提交于
drivers/lguest/x86/switcher_32.S:(.text+0x3815f8): undefined reference to `LGUEST_PAGES_regs_trapnum' This problem was caused by asm-offsets.c only having the offsets when lguest *guest* support was set, not lguest host (host support used to imply guest support, so now they're separate these bugs come out). Lguest guest support and host support are separate config options: they used to be tied together. Sort out which parts of asm-offsets are needed for Guest and Host. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Yinghai Lu 提交于
One system doesn't have RAM for node0 installed. SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 1 -> APIC 2 -> Node 1 SRAT: PXM 1 -> APIC 3 -> Node 1 SRAT: Node 1 PXM 1 0-a0000 SRAT: Node 1 PXM 1 0-dd000000 SRAT: Node 1 PXM 1 0-123000000 ACPI: SLIT: nodes = 2 10 13 13 10 mapped APIC to ffffffffff5fb000 ( fee00000) Bootmem setup node 1 0000000000000000-0000000123000000 NODE_DATA [000000000000e000 - 0000000000014fff] bootmap [0000000000015000 - 00000000000395ff] pages 25 Could not find start_pfn for node 0 Pid: 0, comm: swapper Not tainted 2.6.24-smp-g5a514e21-dirty #14 Call Trace: [<ffffffff80bab498>] free_area_init_node+0x22/0x381 [<ffffffff8045ffc5>] generic_swap+0x0/0x17 [<ffffffff80bab0cc>] find_zone_movable_pfns_for_nodes+0x54/0x271 [<ffffffff80baba5f>] free_area_init_nodes+0x239/0x287 [<ffffffff80ba6311>] paging_init+0x46/0x4c [<ffffffff80b9dda5>] setup_arch+0x3c3/0x44e [<ffffffff80b978be>] start_kernel+0x6f/0x2c7 [<ffffffff80b971cc>] _sinittext+0x1cc/0x1d3 This happens because node 0 is not online, but the node state in mm/page_alloc.c has node 0 set. nodemask_t node_states[NR_NODE_STATES] __read_mostly = { [N_POSSIBLE] = NODE_MASK_ALL, [N_ONLINE] = { { [0] = 1UL } }, So we need to clear node_online_map before initializing the memory. Signed-off-by: NYinghai Lu <yinghai.lu@sun.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
When the CPA code is called with an virtual address in the range of the direct mapping or the high alias then we do not need to run through the alias check for this range. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
NX settings are not required to be consistent across alias mappings. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
The early boot code maps KERNEL_TEXT_SIZE (currently 40MB) starting from __START_KERNEL_map. The kernel itself only needs _text to _end mapped in the high alias. On relocatible kernels the ASM setup code adjusts the compile time created high mappings to the relocation. This creates invalid pmd entries for negative offsets: 0xffffffff80000000 -> pmd entry: ffffffffff2001e3 It points outside of the physical address space and is marked present. This starts at the virtual address __START_KERNEL_map and goes up to the point where the first valid physical address (0x0) is mapped. Zap the mappings before _text and after _end right away in early boot. This removes also the invalid entries. Furthermore it simplifies the range check for high aliases. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
c_p_a() did not discover all aliases correctly. (such as when called on vmalloc()-ed areas or ioremap()-ed areas) Push the alias checks to the lower, physical level and consistently discover all aliases that might exist: the low direct mappings and the high linear kernel-text mappings (on 64-bit). Thanks to Andi Kleen for pointing out that this was buggy. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 15 2月, 2008 8 次提交
-
-
由 Jan Blunck 提交于
d_path() is used on a <dentry,vfsmount> pair. Lets use a struct path to reflect this. [akpm@linux-foundation.org: fix build in mm/memory.c] Signed-off-by: NJan Blunck <jblunck@suse.de> Acked-by: NBryan Wu <bryan.wu@analog.com> Acked-by: NChristoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Blunck 提交于
get_dcookie() is always called with a dentry and a vfsmount from a struct path. Make get_dcookie() take it directly as an argument. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NJan Blunck <jblunck@suse.de> Acked-by: NChristoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Blunck 提交于
* Add path_put() functions for releasing a reference to the dentry and vfsmount of a struct path in the right order * Switch from path_release(nd) to path_put(&nd->path) * Rename dput_path() to path_put_conditional() [akpm@linux-foundation.org: fix cifs] Signed-off-by: NJan Blunck <jblunck@suse.de> Signed-off-by: NAndreas Gruenbacher <agruen@suse.de> Acked-by: NChristoph Hellwig <hch@lst.de> Cc: <linux-fsdevel@vger.kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Steven French <sfrench@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Blunck 提交于
This is the central patch of a cleanup series. In most cases there is no good reason why someone would want to use a dentry for itself. This series reflects that fact and embeds a struct path into nameidata. Together with the other patches of this series - it enforced the correct order of getting/releasing the reference count on <dentry,vfsmount> pairs - it prepares the VFS for stacking support since it is essential to have a struct path in every place where the stack can be traversed - it reduces the overall code size: without patch series: text data bss dec hex filename 5321639 858418 715768 6895825 6938d1 vmlinux with patch series: text data bss dec hex filename 5320026 858418 715768 6894212 693284 vmlinux This patch: Switch from nd->{dentry,mnt} to nd->path.{dentry,mnt} everywhere. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix cifs] [akpm@linux-foundation.org: fix smack] Signed-off-by: NJan Blunck <jblunck@suse.de> Signed-off-by: NAndreas Gruenbacher <agruen@suse.de> Acked-by: NChristoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matt Waddel 提交于
I was looking at timers in the Coldfire system and I noticed that the CONFIG_HIGHPROFILE option seems to be a little out of date. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Modify the extra asm flags for debugger capabilities, use asflags instead for EXTRA_AFLAGS. Suggestion from Sam Ravnborg. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Walter T Gruczka 提交于
Remove bogus conditional jump in return from interrupt path. Reorder the code path now that is not there. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Nilsson 提交于
Adrian Bunk reported the following compile error with a SVN head GCC: ... CC arch/cris/arch-v10/lib/memset.o /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/cris/arch-v10/lib/memset.c: In function 'memset': /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/cris/arch-v10/lib/memset.c:164: error: lvalue required as increment operand /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/cris/arch-v10/lib/memset.c:165: error: lvalue required as increment operand /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/cris/arch-v10/lib/memset.c:166: error: lvalue required as increment operand /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/cris/arch-v10/lib/memset.c:167: error: lvalue required as increment operand /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/cris/arch-v10/lib/memset.c:185: error: lvalue required as increment operand /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/cris/arch-v10/lib/memset.c:189: error: lvalue required as increment operand /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/cris/arch-v10/lib/memset.c:192: error: lvalue required as increment operand ... etc ... This is due to the use of the construct: *((long*)dst)++ = lc; Which is no longer legal since casts don't return an lvalue. The solution is to import the implementation from newlib, which is continually autotested together with GCC mainline, and uses the construct: *(long *) dst = lc; dst += 4; With this change, the generated code actually shrinks 76 bytes since gcc notices that it can use autoincrement for the move instruction in CRIS. text data bss dec hex filename 304 0 0 304 130 memset.old.o text data bss dec hex filename 228 0 0 228 e4 memset.o Since this is an import of a file from newlib, I'm not touching the formatting or correcting any checkpatch errors. Note also that even if the two files for the CRIS v10 and CRIS v32 are identical at the moment, it might be possible to tweak the CRIS v32 version. Thus, I'm not yet folding them into the same file, at least not until we've done some research on it. Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-