Enabling interrupts may result in an interrupt raised and serviced while
VMD holds a lock, resulting in contention with the spin lock held while
enabling interrupts.

The solution is to disable preemption and save/restore the state during
interrupt enable and disable.

Fixes lockdep:

  ======================================================
  [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ]
  4.6.0-2016-06-16-lockdep+ #47 Tainted: G            E
  ------------------------------------------------------
  kworker/0:1/447 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
   (list_lock){+.+...}, at: [<ffffffffa04eb8fc>] vmd_irq_enable+0x3c/0x70 [vmd]

  and this task is already holding:
   (&irq_desc_lock_class){-.-...}, at: [<ffffffff810e1ff6>] __setup_irq+0xa6/0x610
  which would create a new lock dependency:
   (&irq_desc_lock_class){-.-...} -> (list_lock){+.+...}

  but this new dependency connects a HARDIRQ-irq-safe lock:
   (&irq_desc_lock_class){-.-...}
  ... which became HARDIRQ-irq-safe at:
    [<ffffffff810c9f21>] __lock_acquire+0x981/0xe00
    [<ffffffff810cb039>] lock_acquire+0x119/0x220
    [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80
    [<ffffffff810e36d4>] handle_level_irq+0x24/0x110
    [<ffffffff8101f20a>] handle_irq+0x1a/0x30
    [<ffffffff81675fc1>] do_IRQ+0x61/0x120
    [<ffffffff8167404c>] ret_from_intr+0x0/0x20
    [<ffffffff81672e30>] _raw_spin_unlock_irqrestore+0x40/0x60
    [<ffffffff810e21ee>] __setup_irq+0x29e/0x610
    [<ffffffff810e25a1>] setup_irq+0x41/0x90
    [<ffffffff81f5777f>] setup_default_timer_irq+0x1e/0x20
    [<ffffffff81f57798>] hpet_time_init+0x17/0x19
    [<ffffffff81f5775a>] x86_late_time_init+0xa/0x11
    [<ffffffff81f51e9b>] start_kernel+0x382/0x436
    [<ffffffff81f51308>] x86_64_start_reservations+0x2a/0x2c
    [<ffffffff81f51445>] x86_64_start_kernel+0x13b/0x14a

  to a HARDIRQ-irq-unsafe lock:
   (list_lock){+.+...}
  ... which became HARDIRQ-irq-unsafe at:
  ...  [<ffffffff810c9d8e>] __lock_acquire+0x7ee/0xe00
    [<ffffffff810cb039>] lock_acquire+0x119/0x220
    [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80
    [<ffffffffa04eba42>] vmd_msi_init+0x72/0x150 [vmd]
    [<ffffffff810e8597>] msi_domain_alloc+0xb7/0x140
    [<ffffffff810e6b10>] irq_domain_alloc_irqs_recursive+0x40/0xa0
    [<ffffffff810e6cea>] __irq_domain_alloc_irqs+0x14a/0x330
    [<ffffffff810e8a8c>] msi_domain_alloc_irqs+0x8c/0x1d0
    [<ffffffff813ca4e3>] pci_msi_setup_msi_irqs+0x43/0x70
    [<ffffffff813cada1>] pci_enable_msi_range+0x131/0x280
    [<ffffffff813bf5e0>] pcie_port_device_register+0x320/0x4e0
    [<ffffffff813bf9a4>] pcie_portdrv_probe+0x34/0x60
    [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0
    [<ffffffff813b226b>] pci_device_probe+0xdb/0x130
    [<ffffffff8149e3cc>] driver_probe_device+0x22c/0x440
    [<ffffffff8149e774>] __device_attach_driver+0x94/0x110
    [<ffffffff8149bfad>] bus_for_each_drv+0x5d/0x90
    [<ffffffff8149e030>] __device_attach+0xc0/0x140
    [<ffffffff8149e0c0>] device_attach+0x10/0x20
    [<ffffffff813a77f7>] pci_bus_add_device+0x47/0x90
    [<ffffffff813a7879>] pci_bus_add_devices+0x39/0x70
    [<ffffffff813aaba7>] pci_rescan_bus+0x27/0x30
    [<ffffffffa04ec1af>] vmd_probe+0x68f/0x76c [vmd]
    [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0
    [<ffffffff81088064>] work_for_cpu_fn+0x14/0x20
    [<ffffffff8108c244>] process_one_work+0x1f4/0x740
    [<ffffffff8108c9c6>] worker_thread+0x236/0x4f0
    [<ffffffff810935c2>] kthread+0xf2/0x110
    [<ffffffff816738f2>] ret_from_fork+0x22/0x50

  other info that might help us debug this:

   Possible interrupt unsafe locking scenario:

	 CPU0                    CPU1
	 ----                    ----
    lock(list_lock);
				 local_irq_disable();
				 lock(&irq_desc_lock_class);
				 lock(list_lock);
    <Interrupt>
      lock(&irq_desc_lock_class);

   *** DEADLOCK ***
Signed-off-by: NJon Derrick <jonathan.derrick@intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NKeith Busch <keith.busch@intel.com>

Multiple calls to disable an IRQ would have caused the driver to
dereference a poisoned list item.  This re-initializes the list to allow
multiple requests to disable the IRQ.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by Jon Derrick: <jonathan.derrick@intel.com>

VMD device doesn't usually have device archdata specific dma_ops, so we
need to override the default ops for VMD devices.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by Jon Derrick: <jonathan.derrick@intel.com>

MOV to DR6 or DR7 causes a #GP if an attempt is made to write a 1 to
any of bits 63:32.  However, this is not detected at KVM_SET_DEBUGREGS
time, and the next KVM_RUN oopses:

   general protection fault: 0000 [#1] SMP
   CPU: 2 PID: 14987 Comm: a.out Not tainted 4.4.9-300.fc23.x86_64 #1
   Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012
   [...]
   Call Trace:
    [<ffffffffa072c93d>] kvm_arch_vcpu_ioctl_run+0x141d/0x14e0 [kvm]
    [<ffffffffa071405d>] kvm_vcpu_ioctl+0x33d/0x620 [kvm]
    [<ffffffff81241648>] do_vfs_ioctl+0x298/0x480
    [<ffffffff812418a9>] SyS_ioctl+0x79/0x90
    [<ffffffff817a0f2e>] entry_SYSCALL_64_fastpath+0x12/0x71
   Code: 55 83 ff 07 48 89 e5 77 27 89 ff ff 24 fd 90 87 80 81 0f 23 fe 5d c3 0f 23 c6 5d c3 0f 23 ce 5d c3 0f 23 d6 5d c3 0f 23 de 5d c3 <0f> 23 f6 5d c3 0f 0b 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00
   RIP  [<ffffffff810639eb>] native_set_debugreg+0x2b/0x40
    RSP <ffff88005836bd50>

Testcase (beautified/reduced from syzkaller output):

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>

    long r[8];

    int main()
    {
        struct kvm_debugregs dr = { 0 };

        r[2] = open("/dev/kvm", O_RDONLY);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
        r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7);

        memcpy(&dr,
               "\x5d\x6a\x6b\xe8\x57\x3b\x4b\x7e\xcf\x0d\xa1\x72"
               "\xa3\x4a\x29\x0c\xfc\x6d\x44\x00\xa7\x52\xc7\xd8"
               "\x00\xdb\x89\x9d\x78\xb5\x54\x6b\x6b\x13\x1c\xe9"
               "\x5e\xd3\x0e\x40\x6f\xb4\x66\xf7\x5b\xe3\x36\xcb",
               48);
        r[7] = ioctl(r[4], KVM_SET_DEBUGREGS, &dr);
        r[6] = ioctl(r[4], KVM_RUN, 0);
    }
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

This cannot be returned by KVM_GET_VCPU_EVENTS, so it is okay to return
EINVAL.  It causes a WARN from exception_type:

    WARNING: CPU: 3 PID: 16732 at arch/x86/kvm/x86.c:345 exception_type+0x49/0x50 [kvm]()
    CPU: 3 PID: 16732 Comm: a.out Tainted: G        W       4.4.6-300.fc23.x86_64 #1
    Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012
     0000000000000286 000000006308a48b ffff8800bec7fcf8 ffffffff813b542e
     0000000000000000 ffffffffa0966496 ffff8800bec7fd30 ffffffff810a40f2
     ffff8800552a8000 0000000000000000 00000000002c267c 0000000000000001
    Call Trace:
     [<ffffffff813b542e>] dump_stack+0x63/0x85
     [<ffffffff810a40f2>] warn_slowpath_common+0x82/0xc0
     [<ffffffff810a423a>] warn_slowpath_null+0x1a/0x20
     [<ffffffffa0924809>] exception_type+0x49/0x50 [kvm]
     [<ffffffffa0934622>] kvm_arch_vcpu_ioctl_run+0x10a2/0x14e0 [kvm]
     [<ffffffffa091c04d>] kvm_vcpu_ioctl+0x33d/0x620 [kvm]
     [<ffffffff81241248>] do_vfs_ioctl+0x298/0x480
     [<ffffffff812414a9>] SyS_ioctl+0x79/0x90
     [<ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71
    ---[ end trace b1a0391266848f50 ]---

Testcase (beautified/reduced from syzkaller output):

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>
    #include <linux/kvm.h>

    long r[31];

    int main()
    {
        memset(r, -1, sizeof(r));
        r[2] = open("/dev/kvm", O_RDONLY);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
        r[7] = ioctl(r[3], KVM_CREATE_VCPU, 0);

        struct kvm_vcpu_events ve = {
                .exception.injected = 1,
                .exception.nr = 0xd4
        };
        r[27] = ioctl(r[7], KVM_SET_VCPU_EVENTS, &ve);
        r[30] = ioctl(r[7], KVM_RUN, 0);
        return 0;
    }
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

This causes an ugly dmesg splat.  Beautified syzkaller testcase:

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <sys/ioctl.h>
    #include <fcntl.h>
    #include <linux/kvm.h>

    long r[8];

    int main()
    {
        struct kvm_cpuid2 c = { 0 };
        r[2] = open("/dev/kvm", O_RDWR);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
        r[4] = ioctl(r[3], KVM_CREATE_VCPU, 0x8);
        r[7] = ioctl(r[4], KVM_SET_CPUID, &c);
        return 0;
    }
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Found by syzkaller:

    WARNING: CPU: 3 PID: 15175 at arch/x86/kvm/x86.c:7705 __x86_set_memory_region+0x1dc/0x1f0 [kvm]()
    CPU: 3 PID: 15175 Comm: a.out Tainted: G        W       4.4.6-300.fc23.x86_64 #1
    Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012
     0000000000000286 00000000950899a7 ffff88011ab3fbf0 ffffffff813b542e
     0000000000000000 ffffffffa0966496 ffff88011ab3fc28 ffffffff810a40f2
     00000000000001fd 0000000000003000 ffff88014fc50000 0000000000000000
    Call Trace:
     [<ffffffff813b542e>] dump_stack+0x63/0x85
     [<ffffffff810a40f2>] warn_slowpath_common+0x82/0xc0
     [<ffffffff810a423a>] warn_slowpath_null+0x1a/0x20
     [<ffffffffa09251cc>] __x86_set_memory_region+0x1dc/0x1f0 [kvm]
     [<ffffffffa092521b>] x86_set_memory_region+0x3b/0x60 [kvm]
     [<ffffffffa09bb61c>] vmx_set_tss_addr+0x3c/0x150 [kvm_intel]
     [<ffffffffa092f4d4>] kvm_arch_vm_ioctl+0x654/0xbc0 [kvm]
     [<ffffffffa091d31a>] kvm_vm_ioctl+0x9a/0x6f0 [kvm]
     [<ffffffff81241248>] do_vfs_ioctl+0x298/0x480
     [<ffffffff812414a9>] SyS_ioctl+0x79/0x90
     [<ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71

Testcase:

    #include <unistd.h>
    #include <sys/ioctl.h>
    #include <fcntl.h>
    #include <string.h>
    #include <linux/kvm.h>

    long r[8];

    int main()
    {
        memset(r, -1, sizeof(r));
	r[2] = open("/dev/kvm", O_RDONLY|O_TRUNC);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0x0ul);
        r[5] = ioctl(r[3], KVM_SET_TSS_ADDR, 0x20000000ul);
        r[7] = ioctl(r[3], KVM_SET_TSS_ADDR, 0x20000000ul);
        return 0;
    }
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Intel CPUs having Turbo Boost feature implement an MSR to provide a
control interface via rdmsr/wrmsr instructions. One could detect the
presence of this feature by issuing one of these instructions and
handling the #GP exception which is generated in case the referenced MSR
is not implemented by the CPU.

KVM's vCPU model behaves exactly as a real CPU in this case by injecting
a fault when MSR_IA32_PERF_CTL is called (which KVM does not support).
However, some operating systems use this register during an early boot
stage in which their kernel is not capable of handling #GP correctly,
causing #DP and finally a triple fault effectively resetting the vCPU.

This patch implements a dummy handler for MSR_IA32_PERF_CTL to avoid the
crashes.
Signed-off-by: NDmitry Bilunov <kmeaw@yandex-team.ru>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

In theory, nothing prevents the compiler from write-tearing PTEs, or
split PTE writes. These partially-modified PTEs can be fetched by other
cores and cause mayhem. I have not really encountered such case in
real-life, but it does seem possible.

For example, the compiler may try to do something creative for
kvm_set_pte_rmapp() and perform multiple writes to the PTE.
Signed-off-by: NNadav Amit <nadav.amit@gmail.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

The do_brk() and vm_brk() return value was "unsigned long" and returned
the starting address on success, and an error value on failure.  The
reasons are entirely historical, and go back to it basically behaving
like the mmap() interface does.

However, nobody actually wanted that interface, and it causes totally
pointless IS_ERR_VALUE() confusion.

What every single caller actually wants is just the simpler integer
return of zero for success and negative error number on failure.

So just convert to that much clearer and more common calling convention,
and get rid of all the IS_ERR_VALUE() uses wrt vm_brk().
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds the Power Management Controller driver as a PCI driver
for Intel Core SoC architecture.

This driver can utilize debugging capabilities and supported features
as exposed by the Power Management Controller.

Please refer to the below specification for more details on PMC features.
http://www.intel.in/content/www/in/en/chipsets/100-series-chipset-datasheet-vol-2.html

The current version of this driver exposes SLP_S0_RESIDENCY counter.
This counter can be used for detecting fragile SLP_S0 signal related
failures and take corrective actions when PCH SLP_S0 signal is not
asserted after kernel freeze as part of suspend to idle flow
(echo freeze > /sys/power/state).

Intel Platform Controller Hub (PCH) asserts SLP_S0 signal when it
detects favorable conditions to enter its low power mode. As a
pre-requisite the SoC should be in deepest possible Package C-State
and devices should be in low power mode. For example, on Skylake SoC
the deepest Package C-State is Package C10 or PC10. Suspend to idle
flow generally leads to PC10 state but PC10 state may not be sufficient
for realizing the platform wide power potential which SLP_S0 signal
assertion can provide.

SLP_S0 signal is often connected to the Embedded Controller (EC) and the
Power Management IC (PMIC) for other platform power management related
optimizations.

In general, SLP_S0 assertion == PC10 + PCH low power mode + ModPhy Lanes
power gated + PLL Idle.

As part of this driver, a mechanism to read the SLP_S0_RESIDENCY is exposed
as an API and also debugfs features are added to indicate SLP_S0 signal
assertion residency in microseconds.

echo freeze > /sys/power/state
wake the system
cat /sys/kernel/debug/pmc_core/slp_s0_residency_usec
Signed-off-by: NRajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: NVishwanath Somayaji <vishwanath.somayaji@intel.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

The function to update APICv on/off state (in particular, to deactivate
it when enabling Hyper-V SynIC) is incomplete: it doesn't adjust
APICv-related fields among secondary processor-based VM-execution
controls.  As a result, Windows 2012 guests get stuck when SynIC-based
auto-EOI interrupt intersected with e.g. an IPI in the guest.

In addition, the MSR intercept bitmap isn't updated every time "virtualize
x2APIC mode" is toggled.  This path can only be triggered by a malicious
guest, because Windows didn't use x2APIC but rather their own synthetic
APIC access MSRs; however a guest running in a SynIC-enabled VM could
switch to x2APIC and thus obtain direct access to host APIC MSRs
(CVE-2016-4440).

The patch fixes those omissions.
Signed-off-by: NRoman Kagan <rkagan@virtuozzo.com>
Reported-by: NSteve Rutherford <srutherford@google.com>
Reported-by: NYang Zhang <yang.zhang.wz@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Instead of having two functions for cycling through the E820 map in
order to count to be remapped pages and remap them later, just use one
function with a caller supplied sub-function called for each region to
be processed. This eliminates the possibility of a mismatch between
both loops which showed up in certain configurations.
Suggested-by: NEd Swierk <eswierk@skyportsystems.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

b4ff8389 is incomplete: relies on nr_legacy_irqs() to get the number
of legacy interrupts when actually nr_legacy_irqs() returns 0 after
probe_8259A(). Use NR_IRQS_LEGACY instead.
Signed-off-by: NStefano Stabellini <sstabellini@kernel.org>
CC: stable@vger.kernel.org

On slow platforms with unreliable TSC, such as QEMU emulated machines,
it is possible for the kernel to request the next event in the past. In
that case, in the current implementation of xen_vcpuop_clockevent, we
simply return -ETIME. To be precise the Xen returns -ETIME and we pass
it on. However the result of this is a missed event, which simply causes
the kernel to hang.

Instead it is better to always ask the hypervisor for a timer event,
even if the timeout is in the past. That way there are no lost
interrupts and the kernel survives. To do that, remove the
VCPU_SSHOTTMR_future flag.
Signed-off-by: NStefano Stabellini <sstabellini@kernel.org>
Acked-by: NJuergen Gross <jgross@suse.com>

Useful when tracing nested setups where the guest may trigger more than
the host usually does. But even some typical host exits were missing.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

These were supposed to be a bitwise operation but there is a typo.
The result is mostly harmless, but sparse correctly complains.

Fixes: 44a95dae ('KVM: x86: Detect and Initialize AVIC support')
Fixes: 18f40c53 ('svm: Add VMEXIT handlers for AVIC')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

most architectures are relying on mmap_sem for write in their
arch_setup_additional_pages.  If the waiting task gets killed by the oom
killer it would block oom_reaper from asynchronous address space reclaim
and reduce the chances of timely OOM resolving.  Wait for the lock in
the killable mode and return with EINTR if the task got killed while
waiting.
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>	[x86 vdso]
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

vm_brk is allowed to fail but load_aout_binary simply ignores the error
and happily continues.  I haven't noticed any problem from that in real
life but later patches will make the failure more likely because vm_brk
will become killable (resp.  mmap_sem for write waiting will become
killable) so we should be more careful now.

The error handling should be quite straightforward because there are
calls to vm_mmap which check the error properly already.  The only
notable exception is set_brk which is called after beyond_if label.  But
nothing indicates that we cannot move it above set_binfmt as the two do
not depend on each other and fail before we do set_binfmt and alter
reference counting.
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This option was replaced by PAGE_COUNTER which is selected by MEMCG.
Signed-off-by: NKonstantin Khlebnikov <koct9i@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NBalbir Singh <bsingharora@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement the protection method for the crash kernel memory reservation
for the 64-bit x86 kdump.
Signed-off-by: NXunlei Pang <xlpang@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Minfei Huang <mhuang@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I'm looking at trying to possibly merge the 32-bit and 64-bit versions
of the x86 uaccess.h implementation, but first this needs to be cleaned
up.

For example, the 32-bit version of "__copy_from_user_inatomic()" is
mostly the special cases for the constant size, and it's actually almost
never relevant.  Most users aren't actually using a constant size
anyway, and the few cases that do small constant copies are better off
just using __get_user() instead.

So get rid of the unnecessary complexity.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I'm looking at trying to possibly merge the 32-bit and 64-bit versions
of the x86 uaccess.h implementation, but first this needs to be cleaned
up.

For example, the 32-bit version of "__copy_to_user_inatomic()" is mostly
the special cases for the constant size, and it's actually never
relevant.  Every user except for one aren't actually using a constant
size anyway, and the one user that uses it is better off just using
__put_user() instead.

So get rid of the unnecessary complexity.

[ The same cleanup should likely happen to __copy_from_user_inatomic()
  as well, but that one has a lot more users that I need to take a look
  at first ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch extends save_fp_registers() and restore_fp_registers() to use
PTRACE_GETREGSET and PTRACE_SETREGSET with the XSTATE note type, adding
support for new processor state extensions between context switches.

When the new ptrace requests are unavailable, it falls back to the old
PTRACE_GETFPREGS and PTRACE_SETFPREGS methods, which have been renamed to
save_i387_registers() and restore_i387_registers().

Now these functions expect *fp_regs to have the space of an _xstate struct.
Thus, this also makes ptrace in UML responde to PTRACE_GETFPREGS/_SETFPREG
requests with a user_i387_struct (thus independent from HOST_FP_SIZE), and
by calling save_i387_registers() and restore_i387_registers() instead of
the extended save_fp_registers() and restore_fp_registers() functions.
Signed-off-by: NEli Cooper <elicooper@gmx.com>

Extends fpstate to _xstate, in order to hold AVX/YMM registers.

To avoid oversized stack frame, the following functions have been
refactored by using malloc.
 - sig_handler_common
 - timer_real_alarm_handler
Signed-off-by: NEli Cooper <elicooper@gmx.com>

This patch makes UML saves/restores FPU state from/to the fpstate in
pt_regs when setting up or returning from a signal stack, rather than
calling ptrace directly. This ensures that FPU state is correctly
preserved around signal handlers in a multi-threaded scenario.
Signed-off-by: NEli Cooper <elicooper@gmx.com>

Commit b3c1be1b ("base: isa: Remove X86_32 dependency") made ISA
support available on x86-64 too.  That's not right - while there are
some LPC-style devices that might be useful still and be based on
ISA-like IP blocks, that is *not* an excuse to try to enable any random
legacy drivers.

Such drivers should be individually enabled and made to perhaps depend
on ISA_DMA_API instead (which we have continued to support on x86-64).
Or we could add another "ISA_XYZ_API" that we support that doesn't
enable random old drivers that aren't even 64-bit clean nor do we have
any test coverage for.

Turning off ISA will now also turn off some drivers that have been
marked as depending on it as part of this series, and that used to work
on modern platforms.

See for example commits ad7afc38..cc736607, which may also need
to be reverted.

This commit means that the warnings that came in due to enabling ISA
widely are now gone again.
Acked-by: NWilliam Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

printk() takes some locks and could not be used a safe way in NMI
context.

The chance of a deadlock is real especially when printing stacks from
all CPUs.  This particular problem has been addressed on x86 by the
commit a9edc880 ("x86/nmi: Perform a safe NMI stack trace on all
CPUs").

The patchset brings two big advantages.  First, it makes the NMI
backtraces safe on all architectures for free.  Second, it makes all NMI
messages almost safe on all architectures (the temporary buffer is
limited.  We still should keep the number of messages in NMI context at
minimum).

Note that there already are several messages printed in NMI context:
WARN_ON(in_nmi()), BUG_ON(in_nmi()), anything being printed out from MCE
handlers.  These are not easy to avoid.

This patch reuses most of the code and makes it generic.  It is useful
for all messages and architectures that support NMI.

The alternative printk_func is set when entering and is reseted when
leaving NMI context.  It queues IRQ work to copy the messages into the
main ring buffer in a safe context.

__printk_nmi_flush() copies all available messages and reset the buffer.
Then we could use a simple cmpxchg operations to get synchronized with
writers.  There is also used a spinlock to get synchronized with other
flushers.

We do not longer use seq_buf because it depends on external lock.  It
would be hard to make all supported operations safe for a lockless use.
It would be confusing and error prone to make only some operations safe.

The code is put into separate printk/nmi.c as suggested by Steven
Rostedt.  It needs a per-CPU buffer and is compiled only on
architectures that call nmi_enter().  This is achieved by the new
HAVE_NMI Kconfig flag.

The are MN10300 and Xtensa architectures.  We need to clean up NMI
handling there first.  Let's do it separately.

The patch is heavily based on the draft from Peter Zijlstra, see

  https://lkml.org/lkml/2015/6/10/327

[arnd@arndb.de: printk-nmi: use %zu format string for size_t]
[akpm@linux-foundation.org: min_t->min - all types are size_t here]
Signed-off-by: NPetr Mladek <pmladek@suse.com>
Suggested-by: NPeter Zijlstra <peterz@infradead.org>
Suggested-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Jan Kara <jack@suse.cz>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>	[arm part]
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jiri Kosina <jkosina@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We need to call exit_thread from copy_process in a fail path.  So make it
accept task_struct as a parameter.

[v2]
* s390: exit_thread_runtime_instr doesn't make sense to be called for
  non-current tasks.
* arm: fix the comment in vfp_thread_copy
* change 'me' to 'tsk' for task_struct
* now we can change only archs that actually have exit_thread

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Define HAVE_EXIT_THREAD for archs which want to do something in
exit_thread. For others, let's define exit_thread as an empty inline.

This is a cleanup before we change the prototype of exit_thread to
accept a task parameter.

[akpm@linux-foundation.org: fix mips]
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Exchange between user and kernel memory is coded in assembly language.
Which means that such accesses won't be spotted by KASAN as a compiler
instruments only C code.

Add explicit KASAN checks to user memory access API to ensure that
userspace writes to (or reads from) a valid kernel memory.

Note: Unlike others strncpy_from_user() is written mostly in C and KASAN
sees memory accesses in it.  However, it makes sense to add explicit
check for all @count bytes that *potentially* could be written to the
kernel.

[aryabinin@virtuozzo.com: move kasan check under the condition]
  Link: http://lkml.kernel.org/r/1462869209-21096-1-git-send-email-aryabinin@virtuozzo.com
Link: http://lkml.kernel.org/r/1462538722-1574-4-git-send-email-aryabinin@virtuozzo.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Matt Fleming reported seeing crashes when enabling and disabling
function profiling which uses function graph tracer. Later Namhyung Kim
hit a similar issue and he found that the issue was due to the jmp to
ftrace_stub in ftrace_graph_call was only two bytes, and when it was
changed to jump to the tracing code, it overwrote the ftrace_stub that
was after it.

Masami Hiramatsu bisected this down to a binutils change:

8dcea93252a9ea7dff57e85220a719e2a5e8ab41 is the first bad commit
commit 8dcea93252a9ea7dff57e85220a719e2a5e8ab41
Author: H.J. Lu <hjl.tools@gmail.com>
Date:   Fri May 15 03:17:31 2015 -0700

    Add -mshared option to x86 ELF assembler

    This patch adds -mshared option to x86 ELF assembler.  By default,
    assembler will optimize out non-PLT relocations against defined non-weak
    global branch targets with default visibility.  The -mshared option tells
    the assembler to generate code which may go into a shared library
    where all non-weak global branch targets with default visibility can
    be preempted.  The resulting code is slightly bigger.  This option
    only affects the handling of branch instructions.

Declaring ftrace_stub as a weak call prevents gas from using two byte
jumps to it, which would be converted to a jump to the function graph
code.

Link: http://lkml.kernel.org/r/20160516230035.1dbae571@gandalf.local.homeReported-by: NMatt Fleming <matt@codeblueprint.co.uk>
Reported-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NMatt Fleming <matt@codeblueprint.co.uk>
Reviewed-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Remove an extraneous space to fix up indentation. Trivial and no
functional change
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1463503215-18339-1-git-send-email-colin.king@canonical.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

x86's page fault handlers had two TASK_SIZE uses that should have
been TASK_SIZE_MAX.  I don't think that either one had a visible
effect, but this makes the code clearer and should save a few bytes
of text.

(And I eventually want to eradicate TASK_SIZE.  This will help.)
Reported-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ruslan Kabatsayev <b7.10110111@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1242fb23b0d05c3069dbf5758ac55d26bc114bef.1462914565.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

The GSBASE upper limit exists to prevent user code from confusing
the paranoid idtentry path.  The FSBASE upper limit is just for
consistency.  There's no need to enforce a smaller limit for 32-bit
tasks.

Just use TASK_SIZE_MAX.  This simplifies the logic and will save a
few bytes of code.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/5357f2fe0f103eabf005773b70722451eab09a89.1462897104.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

This erratum essentially causes the CPU to forget which privilege
level it is operating on (kernel vs. user) for the purposes of MPX.

This erratum can only be triggered when a system is not using
Supervisor Mode Execution Prevention (SMEP).  Our workaround for
the erratum is to ensure that MPX can only be used in cases where
SMEP is present in the processor and is enabled.

This erratum only affects Core processors.  Atom is unaffected.
But, there is no architectural way to determine Atom vs. Core.
So, we just apply this workaround to all processors.  It's
possible that it will mistakenly disable MPX on some Atom
processsors or future unaffected Core processors.  There are
currently no processors that have MPX and not SMEP.  It would
take something akin to a hypervisor masking SMEP out on an Atom
processor for this to present itself on current hardware.

More details can be found at:

  http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/desktop-6th-gen-core-family-spec-update.pdf

"
  SKD046 Branch Instructions May Initialize MPX Bound Registers Incorrectly

  Problem:

  Depending on the current Intel MPX (Memory Protection
  Extensions) configuration, execution of certain branch
  instructions (near CALL, near RET, near JMP, and Jcc
  instructions) without a BND prefix (F2H) initialize the MPX bound
  registers. Due to this erratum, such a branch instruction that is
  executed both with CPL = 3 and with CPL < 3 may not use the
  correct MPX configuration register (BNDCFGU or BNDCFGS,
  respectively) for determining whether to initialize the bound
  registers; it may thus initialize the bound registers when it
  should not, or fail to initialize them when it should.

  Implication:

  A branch instruction that has executed both in user mode and in
  supervisor mode (from the same linear address) may cause a #BR
  (bound range fault) when it should not have or may not cause a
  #BR when it should have.  Workaround An operating system can
  avoid this erratum by setting CR4.SMEP[bit 20] to enable
  supervisor-mode execution prevention (SMEP). When SMEP is
  enabled, no code can be executed both with CPL = 3 and with CPL < 3.
"
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160512220400.3B35F1BC@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

I've just discovered that the useful-sounding has_transparent_hugepage()
is actually an architecture-dependent minefield: on some arches it only
builds if CONFIG_TRANSPARENT_HUGEPAGE=y, on others it's also there when
not, but on some of those (arm and arm64) it then gives the wrong
answer; and on mips alone it's marked __init, which would crash if
called later (but so far it has not been called later).

Straighten this out: make it available to all configs, with a sensible
default in asm-generic/pgtable.h, removing its definitions from those
arches (arc, arm, arm64, sparc, tile) which are served by the default,
adding #define has_transparent_hugepage has_transparent_hugepage to
those (mips, powerpc, s390, x86) which need to override the default at
runtime, and removing the __init from mips (but maybe that kind of code
should be avoided after init: set a static variable the first time it's
called).
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Ning Qu <quning@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: Vineet Gupta <vgupta@synopsys.com>		[arch/arc]
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>	[arch/s390]
Acked-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update setup_hugepagesz() to call hugetlb_bad_size() when unsupported
hugepage size is found.
Signed-off-by: NVaishali Thakkar <vaishali.thakkar@oracle.com>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: NMike Kravetz <mike.kravetz@oracle.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Lots of code does

	node = next_node(node, XXX);
	if (node == MAX_NUMNODES)
		node = first_node(XXX);

so create next_node_in() to do this and use it in various places.

[mhocko@suse.com: use next_node_in() helper]
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMichal Hocko <mhocko@kernel.org>
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Hui Zhu <zhuhui@xiaomi.com>
Cc: Wang Xiaoqiang <wangxq10@lzu.edu.cn>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With CONFIG_FRAME_POINTER enabled, a thunk can pass a bad return address
value to the called function.  '9*8(%rsp)' actually gets the frame
pointer, not the return address.

The only users of the 'put_ret_addr_in_rdi' option are two functions
which trace the enabling and disabling of interrupts, so this bug can
result in bad debug or tracing information with CONFIG_IRQSOFF_TRACER or
CONFIG_PROVE_LOCKING.

Fix this by implementing the suggestion of Linus: explicitly push
the frame pointer all the time and constify the stack offsets that
way. This is both correct and easier to read.
Reported-by: NMatt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
[ Extended the changelog a bit. ]
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 058fb732 ("x86/asm/entry: Create stack frames in thunk functions")
Link: http://lkml.kernel.org/r/20160517180606.v5o7wcgdni7443ol@trebleSigned-off-by: NIngo Molnar <mingo@kernel.org>