- 18 9月, 2005 13 次提交
-
-
由 Jeff Dike 提交于
This patch implements a stack trace for a thread, not unlike sysrq-t does. The advantage to this is that a break point can be placed on showreqs, so that upon showing the stack, you jump immediately into the debugger. While sysrq-t does the same thing, sysrq-t shows *all* threads stacks. It also doesn't work right now. In the future, I thought it might be acceptable to make this show all pids stacks, but perhaps leaving well enough alone and just using sysrq-t would be okay. For now, upon receiving the stack command, UML switches context to that thread, dumps its registers, and then switches context back to the original thread. Since UML compacts all threads into one of 4 host threads, this sort of mechanism could be expanded in the future to include other debugging helpers that sysrq does not cover. Note by jdike - The main benefit to this is that it brings an arbitrary thread back into context, where it can be examined by gdb. The fact that it dumps it stack is secondary. This provides the capability to examine a sleeping thread, which has existed in tt mode, but not in skas mode until now. Also, the other threads, that sysrq doesn't cover, can be gdb-ed directly anyway. Signed-off-by: Allan Graves<allan.graves@gmail.com> Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
This patch moves code that is in both switch_to_tt and switch_to_skas to the top level _switch_to function, keeping us from duplicating code. It is required for the stack trace patch to work properly. Signed-off-by: NAllan Graves <allan.graves@gmail.com> Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Oberparleiter 提交于
When an asynchronous interruption occurs during the execution of the 'critical section' within the generic interruption handling code (entry.S), a faulty check for a userspace PSW may result in a corrupted kernel stack pointer which subsequently triggers a stack overflow check. Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Srivatsa Vaddagiri 提交于
Fix a problem wherein a new-born task is added to a dead CPU. Signed-off-by: NSrivatsa Vaddagiri <vatsa@in.ibm.com> Acked-by: NNick Piggin <nickpiggin@yahoo.com.au> Acked-by: NShaohua Li <shaohua.li@intel.com> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Domen Puncer 提交于
Remove nowhere referenced file (egrep "hw-bse\." didn't find anything). Signed-off-by: NDomen Puncer <domen@coderock.org> Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Acked-by: NIan Molton <spyro@f2s.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Volker Sameske 提交于
Add code to support the re-IPL method using diagnose 0x308. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Heiko Carstens 提交于
Disable preemption in show_cpuinfo to avoid problems and the warning about smp_processor_id. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Martin Schwidefsky 提交于
Got confused with the crypto update. The last patch added a call to destroy_workqueue() for a non-existent workqueue with the comment "Remove device workqueue on module unload". This is nonsense. Remove the offending hunk again. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Heiko Carstens 提交于
Calculate correct size for bl_dev array. It should be 8KB instead of 512KB for 2^16 bits. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Martin Schwidefsky 提交于
Update default configuration of s390. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Richard Purdie 提交于
Add partition definitions for the new Sharp Zaurus models Spitz (SL-C3000), Akita (SL-C1000) and Borzoi (SL-C3100) Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Richard Purdie 提交于
This hunk from the sharpsl/corgi backlight update appears to have got lost somewhere along the way. Its needed to match the other changes. Signed-Off-By: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 H. Peter Anvin 提交于
This patch fixes a signedness bug with RAID6 for Altivec, and makes the Altivec code testable in userspace. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 9月, 2005 9 次提交
-
-
由 Linus Torvalds 提交于
-
由 Karsten Keil 提交于
Signed-off-by: NKarsten Keil <kkeil@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Karsten Keil 提交于
Sitecom DC-105 PCI work with hfc_pci HiSax driver Signed-off-by: NKarsten Keil <kkeil@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hidetoshi Seto 提交于
There were some trailing white spaces, long lines, brackets in weird style etc. This patch cleans them up. Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Linus Torvalds 提交于
-
由 Al Viro 提交于
[originally sent to Alan, he had no problems with it] - iomem pointers marked as such - several direct dereferencings of such pointers replaced with read[bw](). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Keith Owens 提交于
Add Documentation/ia64/mca.txt, an ad-hoc collection of notes on IA64 MCA and INIT processing. Signed-off-by: NKeith Owens <kaos@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Linus Torvalds 提交于
-
由 Peter Chubb 提交于
This patch removes some compilation warnings, mostly trivially. acpi.c fix also noted by Kenji Kaneshige. Signed-off-by; Peter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 16 9月, 2005 5 次提交
-
-
由 Jeff Garzik 提交于
Make sure we that completion is the final action we take; prior to this change, another CPU may have changed ap->pio_task_state before we tested it a final time. Spotted by, and original patch by Albert Lee @ IBM. Also includes a minor optimization: eliminate a ton of unnecessary queue_work() calls, simply by jumping to the beginning of the FSM function ata_pio_task().
-
由 Jens Osterkamp 提交于
This patch makes the driver work with any BladeCenter network switch, it used to work only with certain models. Please apply. Signed-off-by: NArnd Bergmann <arndb@de.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Don't crash if ethtool statistics are requested and device is down. Fix is to allocate pci space for statistics only when needed. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Jay Vosburgh 提交于
Bonding leaks route structures when the ARP monitor is configured to send probes over VLANs. Originally reported by Ian Abel <ian.abel@mxtelecom.com>; his original fix was modified by Jay Vosburgh to correct coding style and to close a leak it missed. Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Jeff Garzik 提交于
-
- 15 9月, 2005 13 次提交
-
-
由 Antonino A. Daplas 提交于
In the unlikely case of the new screen width much wider then the old, use (old_row_size * new_rows) instead of new_screen_size to prevent a buffer overrun during the copy. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Reported by: walt <wa1ter@myrealbox.com> "I routinely switch the console font during bootup to 8x8 so I can get 50 lines per screen. Until 09 Sept, just changing to the small font automatically gave me all 50 lines -- but now I'm only getting 25 lines even with the small font. The bottom half of the screen displays the text that already scrolled off the top." This bug is due to an erroneous check in the recently added hook, vgacon_resize(). It checks the new height against the original number of rows of the console. Because the original number of rows depends on both the scanline and the font height, check it instead against the scanline/fontheight. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
- The Twister chipsets are actually prosavages. Reclassify them as such and remove the S3_SAVAGE_TWISTER id. - Fix i2c code if fb_firmware_edid() returns NULL Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jimi Xenidis 提交于
As noted by Olof Johansson <olof@lixom.net>: "A recent patch changed the way the LPAR bit is checked during early boot. This resulted in a polarity change in a conditional branch without changing the branch, causing at least some legacy machines to not boot." This fixes it. Signed-off-by: NJimi Xenidis <jimix@watson.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Russell King 提交于
Thomas Gleixner reported that mmaping and unmapping each physical page in turn eventually caused the kernel to oops. It appears that pfn_valid() in the discontigmem case was too simplistic for proper operation. Tighten the logic so we also check if the PFN is within the range of the selected memory node. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie This patch adds MMC and UDC support to the PXA Poodle platform. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie This patch cleans up the PXA Poodle platform code removing an unneeded static iomap. It also corrects errors in the platform header file and adds a missing GPIO define. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie This patch cleans up the PXA Corgi platform code removing an unneeded static iomap, an unneeded function and some debug messages. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie This patch adds a missing parameter to the scoop calls made by collie.c Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek It's silly to have I2C enabled in all ixp2000 defconfigs but not to have the ixp2000 bus driver enabled in any of them. This patch enables CONFIG_I2C_IXP2000 for all in-tree ixp2000 boards. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek The intel docs call it IXP2000_PRODUCT_ID, and we have a definition for IXP2000_PRODUCT_ID as well, so IXP2000_PROD_ID can go. It's only used in one place. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-