1. 09 9月, 2014 2 次提交
    • M
      x86/efi: Fixup GOT in all boot code paths · 9cb0e394
      Matt Fleming 提交于
      Maarten reported that his Macbook pro 8.2 stopped booting after commit
      f23cf8bd ("efi/x86: efistub: Move shared dependencies to
      <asm/efi.h>"), the main feature of which is changing the visibility of
      symbol 'efi_early' from local to global.
      
      By making 'efi_early' global we end up requiring an entry in the Global
      Offset Table. Unfortunately, while we do include code to fixup GOT
      entries in the early boot code, it's only called after we've executed
      the EFI boot stub.
      
      What this amounts to is that references to 'efi_early' in the EFI boot
      stub don't point to the correct place.
      
      Since we've got multiple boot entry points we need to be prepared to
      fixup the GOT in multiple places, while ensuring that we never do it
      more than once, otherwise the GOT entries will still point to the wrong
      place.
      Reported-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
      Tested-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
      Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
      Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      9cb0e394
    • Y
      x86/efi: Only load initrd above 4g on second try · 47226ad4
      Yinghai Lu 提交于
      Mantas found that after commit 4bf7111f ("x86/efi: Support initrd
      loaded above 4G"), the kernel freezes at the earliest possible moment
      when trying to boot via UEFI on Asus laptop.
      
      Revert to old way to load initrd under 4G on first try, second try will
      use above 4G buffer when initrd is too big and does not fit under 4G.
      
      [ The cause of the freeze appears to be a firmware bug when reading
        file data into buffers above 4GB, though the exact reason is unknown.
        Mantas reports that the hang can be avoid if the file size is a
        multiple of 512 bytes, but I've seen some ASUS firmware simply
        corrupting the file data rather than freezing.
      
        Laszlo fixed an issue in the upstream EDK2 DiskIO code in Aug 2013
        which may possibly be related, commit 4e39b75e ("MdeModulePkg/DiskIoDxe:
        fix source/destination pointer of overrun transfer").
      
        Whatever the cause, it's unlikely that a fix will be forthcoming
        from the vendor, hence the workaround - Matt ]
      
      Cc: Laszlo Ersek <lersek@redhat.com>
      Reported-by: NMantas Mikulėnas <grawity@gmail.com>
      Reported-by: NHarald Hoyer <harald@redhat.com>
      Tested-by: NAnders Darander <anders@chargestorm.se>
      Tested-by: NCalvin Walton <calvin.walton@kepstin.ca>
      Signed-off-by: NYinghai Lu <yinghai@kernel.org>
      Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      47226ad4
  2. 19 7月, 2014 2 次提交
  3. 08 7月, 2014 2 次提交
    • A
      efi: efistub: Refactor stub components · bd669475
      Ard Biesheuvel 提交于
      In order to move from the #include "../../../xxxxx.c" anti-pattern used
      by both the x86 and arm64 versions of the stub to a static library
      linked into either the kernel proper (arm64) or a separate boot
      executable (x86), there is some prepatory work required.
      
      This patch does the following:
      - move forward declarations of functions shared between the arch
        specific and the generic parts of the stub to include/linux/efi.h
      - move forward declarations of functions shared between various .c files
        of the generic stub code to a new local header file called "efistub.h"
      - add #includes to all .c files which were formerly relying on the
        #includor to include the correct header files
      - remove all static modifiers from functions which will need to be
        externally visible once we move to a static library
      Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
      Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      bd669475
    • A
      efi/x86: efistub: Move shared dependencies to <asm/efi.h> · f23cf8bd
      Ard Biesheuvel 提交于
      This moves definitions depended upon both by code under arch/x86/boot
      and under drivers/firmware/efi to <asm/efi.h>. This is in preparation of
      turning the stub code under drivers/firmware/efi into a static library.
      Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
      Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      f23cf8bd
  4. 19 6月, 2014 1 次提交
  5. 17 6月, 2014 1 次提交
  6. 08 5月, 2014 1 次提交
  7. 06 5月, 2014 1 次提交
  8. 17 4月, 2014 2 次提交
  9. 11 4月, 2014 3 次提交
  10. 27 3月, 2014 1 次提交
  11. 20 3月, 2014 4 次提交
  12. 05 3月, 2014 7 次提交
    • M
      x86/boot: Fix non-EFI build · 3db4cafd
      Matt Fleming 提交于
      The kbuild test robot reported the following errors, introduced with
      commit 54b52d87 ("x86/efi: Build our own EFI services pointer
      table"),
      
       arch/x86/boot/compressed/head_32.o: In function `efi32_config':
      >> (.data+0x58): undefined reference to `efi_call_phys'
      
       arch/x86/boot/compressed/head_64.o: In function `efi64_config':
      >> (.data+0x90): undefined reference to `efi_call6'
      
      Wrap the efi*_config structures in #ifdef CONFIG_EFI_STUB so that we
      don't make references to EFI functions if they're not compiled in.
      Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      3db4cafd
    • M
      x86/boot: Don't overwrite cr4 when enabling PAE · 108d3f44
      Matt Fleming 提交于
      Some EFI firmware makes use of the FPU during boottime services and
      clearing X86_CR4_OSFXSR by overwriting %cr4 causes the firmware to
      crash.
      
      Add the PAE bit explicitly instead of trashing the existing contents,
      leaving the rest of the bits as the firmware set them.
      
      Cc: H. Peter Anvin <hpa@zytor.com>
      Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      108d3f44
    • M
      x86/efi: Firmware agnostic handover entry points · b8ff87a6
      Matt Fleming 提交于
      The EFI handover code only works if the "bitness" of the firmware and
      the kernel match, i.e. 64-bit firmware and 64-bit kernel - it is not
      possible to mix the two. This goes against the tradition that a 32-bit
      kernel can be loaded on a 64-bit BIOS platform without having to do
      anything special in the boot loader. Linux distributions, for one thing,
      regularly run only 32-bit kernels on their live media.
      
      Despite having only one 'handover_offset' field in the kernel header,
      EFI boot loaders use two separate entry points to enter the kernel based
      on the architecture the boot loader was compiled for,
      
          (1) 32-bit loader: handover_offset
          (2) 64-bit loader: handover_offset + 512
      
      Since we already have two entry points, we can leverage them to infer
      the bitness of the firmware we're running on, without requiring any boot
      loader modifications, by making (1) and (2) valid entry points for both
      CONFIG_X86_32 and CONFIG_X86_64 kernels.
      
      To be clear, a 32-bit boot loader will always use (1) and a 64-bit boot
      loader will always use (2). It's just that, if a single kernel image
      supports (1) and (2) that image can be used with both 32-bit and 64-bit
      boot loaders, and hence both 32-bit and 64-bit EFI.
      
      (1) and (2) must be 512 bytes apart at all times, but that is already
      part of the boot ABI and we could never change that delta without
      breaking existing boot loaders anyhow.
      Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      b8ff87a6
    • M
      x86/efi: Split the boot stub into 32/64 code paths · c116e8d6
      Matt Fleming 提交于
      Make the decision which code path to take at runtime based on
      efi_early->is64.
      Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      c116e8d6
    • M
      x86/efi: Add early thunk code to go from 64-bit to 32-bit · 0154416a
      Matt Fleming 提交于
      Implement the transition code to go from IA32e mode to protected mode in
      the EFI boot stub. This is required to use 32-bit EFI services from a
      64-bit kernel.
      
      Since EFI boot stub is executed in an identity-mapped region, there's
      not much we need to do before invoking the 32-bit EFI boot services.
      However, we do reload the firmware's global descriptor table
      (efi32_boot_gdt) in case things like timer events are still running in
      the firmware.
      Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      0154416a
    • M
      x86/efi: Build our own EFI services pointer table · 54b52d87
      Matt Fleming 提交于
      It's not possible to dereference the EFI System table directly when
      booting a 64-bit kernel on a 32-bit EFI firmware because the size of
      pointers don't match.
      
      In preparation for supporting the above use case, build a list of
      function pointers on boot so that callers don't have to worry about
      converting pointer sizes through multiple levels of indirection.
      Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      54b52d87
    • M
      efi: Add separate 32-bit/64-bit definitions · 677703ce
      Matt Fleming 提交于
      The traditional approach of using machine-specific types such as
      'unsigned long' does not allow the kernel to interact with firmware
      running in a different CPU mode, e.g. 64-bit kernel with 32-bit EFI.
      
      Add distinct EFI structure definitions for both 32-bit and 64-bit so
      that we can use them in the 32-bit and 64-bit code paths.
      Acked-by: NBorislav Petkov <bp@suse.de>
      Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      677703ce
  13. 26 2月, 2014 1 次提交
  14. 15 1月, 2014 1 次提交
  15. 10 12月, 2013 1 次提交
    • H
      x86, build: Pass in additional -mno-mmx, -mno-sse options · 8b3b005d
      H. Peter Anvin 提交于
      In checkin
      
          5551a34e x86-64, build: Always pass in -mno-sse
      
      we unconditionally added -mno-sse to the main build, to keep newer
      compilers from generating SSE instructions from autovectorization.
      However, this did not extend to the special environments
      (arch/x86/boot, arch/x86/boot/compressed, and arch/x86/realmode/rm).
      Add -mno-sse to the compiler command line for these environments, and
      add -mno-mmx to all the environments as well, as we don't want a
      compiler to generate MMX code either.
      
      This patch also removes a $(cc-option) call for -m32, since we have
      long since stopped supporting compilers too old for the -m32 option,
      and in fact hardcode it in other places in the Makefiles.
      Reported-by: NKevin B. Smith <kevin.b.smith@intel.com>
      Cc: Sunil K. Pandey <sunil.k.pandey@intel.com>
      Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      Cc: H. J. Lu <hjl.tools@gmail.com>
      Link: http://lkml.kernel.org/n/tip-j21wzqv790q834n7yc6g80j1@git.kernel.org
      Cc: <stable@vger.kernel.org> # build fix only
      8b3b005d
  16. 13 11月, 2013 1 次提交
  17. 12 11月, 2013 2 次提交
  18. 13 10月, 2013 5 次提交
  19. 09 10月, 2013 1 次提交
  20. 30 9月, 2013 1 次提交
    • B
      x86 efi: bugfix interrupt disabling sequence · 0ce6cda2
      Bart Kuivenhoven 提交于
      The problem in efi_main was that the idt was cleared before the
      interrupts were disabled.
      
      The UEFI spec states that interrupts aren't used so this shouldn't be
      too much of a problem. Peripherals however don't necessarily know about
      this and thus might cause interrupts to happen anyway. Even if
      ExitBootServices() has been called.
      
      This means there is a risk of an interrupt being triggered while the IDT
      register is nullified and the interrupt bit hasn't been cleared,
      allowing for a triple fault.
      
      This patch disables the interrupt flag, while leaving the existing IDT
      in place. The CPU won't care about the IDT at all as long as the
      interrupt bit is off, so it's safe to leave it in place as nothing will
      ever happen to it.
      
      [ Removed the now unused 'idt' variable - Matt ]
      Signed-off-by: NBart Kuivenhoven <bemk@redhat.com>
      Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      0ce6cda2