The code attempts to enable them, but hits an undefined behaviour by
shifting by the entire register's width:

    int lines = 32;
    u32 mask = (1 << lines) - 1;    // 00000000 on x86
    u32 mask = (1 << lines) - 1;    // ffffffff on arm (32)
    u32 mask = (1 << lines) - 1;    // 00000000 on arm64
    u32 mask = (1ULL << lines) - 1; // ffffffff everywhere
Signed-off-by: NAdam Borowski <kilobyte@angband.pl>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Forked from GP106 implementation.

Differences:
- 1 PPC/GPC
- Slightly different grctx magics
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

GP10B's power is managed by generic PM domains, so it does not require a
VDD regulator. Add this option into the chip function structure.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

GR is similar to GP100, with a few unavailable registers.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

GP10B requires a specific initialization sequence due to the absence of
devinit.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

GP10B's MC is compatible with GP100's, but engines need to be explicitly
put out of ELPG during init.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

GP10B's FB is largely compatible with the GP100 implementation.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

GP10B's FIFO is similar to GP100's, but only allows 512 channels.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The GP10B firmware is very close to GM20B's. The only difference is that
it supports booting multiple falcons. In order to avoid having too much
functions and structures shared, implement its support in the same
source file as GM20B firmware.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

GP10B's secboot is largely similar to GM20B's. Only differences are MC
base address and the fact that GPCCS is also securely managed.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Allow the MC base address to be specified as an argument for the WPR
region reading function. GP10B uses a different address layout as GM20B,
so this is necessary. Also export the function to be used by GP10B.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The LS firmware post-run hook is the right place to start said LS
firmware. Moving it here also allows to remove special handling in the
ACR code.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

A LS post-run hook can meet an error meaning the failure of secure boot.
Make sure this can be reported.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Having access to the secboot instance loading a LS firmware can be
useful to LS firmware handlers. At least more useful than just having an
out-of-context subdev pointer.

GP10B's firmware will also need to know the WPR address, which can be
obtained from the secboot instance.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Change the secboot and msgqueue interfaces to take a mask of falcons to
reset instead of a single falcon. The GP10B firmware interface requires
FECS and GPCCS to be booted in a single firmware command.

For firmwares that only support single falcon boot, it is trivial to
loop over the mask and boot each falcons individually.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The gk20a implementation of instance memory uses vmap()/vunmap() to map
memory regions into the kernel's virtual address space. These functions
may sleep, so protecting them by a spin lock is not safe. This triggers
a warning if the DEBUG_ATOMIC_SLEEP Kconfig option is enabled. Fix this
by using a mutex instead.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Tested-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Forked from GP106 implementation.

Split out from commit enabling secboot/gr support so that it can be
added to earlier kernels.

Cc: stable@vger.kernel.org	[4.10+]
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

When the atomic support was added to nouveau, the DRM core did not do this.

However, later in the same merge window, a commit (drm/fence: add in-fences
support) was merged that added it, leading to use-after-frees of the fence
object.

Cc: stable@vger.kernel.org	[4.10+]
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Cc: stable@vger.kernel.org	[4.10+]
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The NV4A (aka NV44A) is an oddity in the family. It only comes in AGP
and PCI varieties, rather than a core PCIE chip with a bridge for
AGP/PCI as necessary. As a result, it appears that the MMU is also
non-functional. For AGP cards, the vast majority of the NV4A lineup,
this worked out since we force AGP cards to use the nv04 mmu. However
for PCI variants, this did not work.

Switching to the NV04 MMU makes it work like a charm. Thanks to mwk for
the suggestion. This should be a no-op for NV4A AGP boards, as they were
using it already.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70388Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Fixes: 590801c1 ("drm/nouveau/mpeg: remove dependence on namedb/engctx lookup")
Cc: stable@vger.kernel.org # v4.3+
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

An external Thunderbolt GPU can neither drive the laptop's panel nor be
powered off by the platform, so there's no point in registering it with
vga_switcheroo.  In fact, when the external GPU is runtime suspended,
vga_switcheroo will cut power to the internal discrete GPU, resulting in
a lockup.

Cc: Ben Skeggs <bskeggs@redhat.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Link: http://patchwork.freedesktop.org/patch/msgid/8e733152b13e7c14501ad5af45c1c5c736584111.1489145162.git.lukas@wunner.de

Surprisingly a lot of legacy drivers roll their own, for
runtime pm and because vmwgfx.

Also make nouveau's set_config static while at it.

Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-19-daniel.vetter@ffwll.ch

Again just going through the motions, no functional changes in here.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>t
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-12-daniel.vetter@ffwll.ch

Nouveau had a few direct calls to ->disable_plane, I replaced those
with drm_plane_force_disable. Same story for shmob.

Otherwise no code changes.

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-5-daniel.vetter@ffwll.ch

Just rolling it out, no code change here.

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-3-daniel.vetter@ffwll.ch

The trouble here is that it does multiple atomic commits under one
drm_modeset_lock_all, which breaks the behind-the-scenes acquire
context magic that function pulls off. It's much better to have one
overall atomic commit. That we still have multiple atomic commits
prevents us from adding some pretty useful debug checks to the atomic
machinery.

Hence it is really a bad idea to call the legacy
drm_crtc_force_disable_all() function. There's 2 atomic drivers using
this still, nouveau and tinydrm. To fix this, introduce a new
drm_atomic_helper_shutdown() by extracting the code from i915.

While at it improve kernel-doc and catch future offenders by
sprinkling a WARN_ON into the legacy function. We should probably move
those into the legacy modeset helpers, too ...

v2: Make it compile on arm drivers too (Noralf).

v3: Correct kerneldoc to point at _disable_all().
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: NNoralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Tested-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321164149.31531-1-daniel.vetter@ffwll.ch

drm_dp_mst_allocate_vcpi() apart from setting up the vcpi structure,
also finds if there are enough slots available. This check is a duplicate
of that implemented in drm_dp_mst_find_vcpi_slots(). Let's move this check
out and reuse the existing drm_dp_mst_find_vcpi_slots() function to check
if there are enough vcpi slots before allocating them.

This brings the check to one place. Additionally drivers that will use MST
state tracking for atomic modesets can use the atomic version of
find_vcpi_slots() and reuse drm_dp_mst_allocate_vcpi()
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NDave Airlie <airlied@redhat.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1489648231-30700-4-git-send-email-dhinakaran.pandiyan@intel.com

The msgqueue pointer validity should be checked by its owner, not by the
msgqueue code itself to avoid this situation.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Reported-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We were returning PTR_ERR() on a NULL pointer, which obviously won't
work. nvkm_engine_ref() will return an error in case something went
wrong.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We might as well dump the drm_file pointer, that's about as useful
a cookie as the pid. Noticed while typing docs for drm_file and friends.

Since the only consumer of this is the tracepoints I think we can safely
change this - those tracepoints should not be uapi relevant at all. It
all goes back to

commit b9c2c9ae
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Thu Jul 1 16:48:09 2010 -0700

    drm: add per-event vblank event trace points

which doesn't give a special justification for using pid over a pointer.

Also note that the nouveau code setting it is entirely pointless:
Since this isn't a vblank event, it will never hit the vblank
tracepoints.

Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NLiviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-11-daniel.vetter@ffwll.ch

This commit reworks the RAM detection algorithm, using RAM-per-LTC to
determine whether a board has a mixed-memory configuration instead of
using RAM-per-FBPA.  I'm not certain the algorithm is perfect, but it
should handle all currently known configurations in the very least.

This should fix GTX 970 boards with 4GiB of RAM where the last 512MiB
isn't fully accessible, as well as only detecting half the VRAM on
GF108 boards.

As a nice side-effect, GP10x memory detection now reuses the majority
of the code from earlier chipsets.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

GF108/GM107 implementations will want slightly different functions for
the upcoming RAM detection improvements.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

I'm not entirely sure NVKM needs to support this now, but I haven't
removed it as of yet just in case it's needed from DEVINIT scripts
where DRM isn't available.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This value represents the actual number of bytes recieved on the AUX
channel as the result of a read transaction.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Apparently sinks are allows to respond with ACK even if they didn't
fully complete a transaction...  It seems like a missed opportunity
for DEFER to me, but what do I know :)
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>