- 17 12月, 2010 40 次提交
-
-
由 Christoph Lameter 提交于
The patch was originally in the use cpuops patchset but it needs an inc_return and is therefore dependent on an extension of the cpu ops. Fixed up and verified that it compiles. get_seq can benefit from this_cpu_operations. Address calculation is avoided and the increment is done using an xadd. Cc: Scott James Remnant <scott@ubuntu.com> Cc: Mike Frysinger <vapier@gentoo.org> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Christoph Lameter 提交于
__this_cpu_inc_return reduces code and simplifies code. Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NChristoph Lameter <cl@linux.com>
-
由 Christoph Lameter 提交于
Use this_cpu_inc_return in one place and avoid ugly __raw_get_cpu in another. V3->V4: - Fix off by one. V4-V4f: - Use &listener_array Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Christoph Lameter 提交于
__this_cpu_inc can create a single instruction to do the same as __get_cpu_var()++. Cc: Richard Kennedy <richard@rsk.demon.co.uk> Cc: Matt Mackall <mpm@selenic.com> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Christoph Lameter 提交于
__this_cpu_inc can create a single instruction with the same effect as the _get_cpu_var(..)++ construct in buffer.c. Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Christoph Hellwig <hch@lst.de> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Christoph Lameter 提交于
Use this_cpu operations to optimize access primitives for highmem. The main effect is the avoidance of address calculations through the use of a segment prefix. V3->V4 - kmap_atomic_idx: Do not return a value. - Use __this_cpu_dec without HIGHMEM_DEBUG Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Catalin Marinas <catalin.marinas@arm.com> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Christoph Lameter 提交于
this_cpu_inc_return() saves us a memory access there. Code size does not change. V1->V2: - Fixed the location of the __per_cpu pointer attributes - Sparse checked V2->V3: - Move fixes to __percpu attribute usage to earlier patch Reviewed-by: NPekka Enberg <penberg@kernel.org> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
-
由 Christoph Lameter 提交于
Supply an implementation for x86 in order to generate more efficient code. V2->V3: - Cleanup - Remove strange type checking from percpu_add_return_op. tj: - Dropped unused typedef from percpu_add_return_op(). - Renamed ret__ to paro_ret__ in percpu_add_return_op(). - Minor indentation adjustments. Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Christoph Lameter 提交于
Introduce generic support for this_cpu_add_return etc. The fallback is to realize these operations with simpler __this_cpu_ops. tj: - Reformatted __cpu_size_call_return2() to make it more consistent with its neighbors. - Dropped unnecessary temp variable ret__ from __this_cpu_generic_add_return(). Reviewed-by: NTejun Heo <tj@kernel.org> Reviewed-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Christoph Lameter 提交于
__get_cpu_var() can be replaced with this_cpu_read and will then use a single read instruction with implied address calculation to access the correct per cpu instance. However, the address of a per cpu variable passed to __this_cpu_read() cannot be determined (since it's an implied address conversion through segment prefixes). Therefore apply this only to uses of __get_cpu_var where the address of the variable is not used. Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Hugh Dickins <hughd@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Christoph Lameter 提交于
Use this_cpu_ops to reduce code size and simplify things in various places. V3->V4: Move instance of this_cpu_inc_return to a later patchset so that this patch can be applied without infrastructure changes. Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Christoph Lameter 提交于
Optimize various per cpu area operations through these new percpu operations. These operations avoid address calculations through the use of segment prefixes and multiple memory references through RMW instructions etc. Reduces code size: Before: christoph@linux-2.6$ size fs/buffer.o text data bss dec hex filename 19169 80 28 19277 4b4d fs/buffer.o After: christoph@linux-2.6$ size fs/buffer.o text data bss dec hex filename 19138 80 28 19246 4b2e fs/buffer.o V3->V4: - Move the use of this_cpu_inc_return into a later patch so that this one can go in without percpu infrastructure changes. Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Christoph Hellwig <hch@lst.de> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Christoph Lameter 提交于
The whole function can be expressed as a simple this_cpu_read() operation. The function overhead is now likely multiple times that of the single instruction that is executed in it. Sedat: fixed compile failure caused by an extra ')'. Cc: William Hubbs <w.d.hubbs@gmail.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Christoph Lameter 提交于
Use this_cpu ops in various places to optimize per cpu data access. Cc: Jason Baron <jbaron@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Christoph Lameter 提交于
__get_cpu_var() can be replaced with this_cpu_read and will then use a single read instruction with implied address calculation to access the correct per cpu instance. However, the address of a per cpu variable passed to __this_cpu_read() cannot be determed (since its an implied address conversion through segment prefixes). Therefore apply this only to uses of __get_cpu_var where the addres of the variable is not used. V3->V4: - Move one instance of this_cpu_inc_return to a later patch so that this one can go in without percpu infrastructrure changes. Sedat: fixed compile failure caused by an extra ')'. Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Christoph Lameter 提交于
this cpu operations can be used to slightly optimize the function. The changes will avoid some address calculations and replace them with the use of the percpu segment register. If one would have this_cpu_inc_return and this_cpu_dec_return then it would be possible to optimize inc_zone_page_state and dec_zone_page_state even more. V1->V2: - Fix __dec_zone_state overflow handling - Use s8 variables for temporary storage. V2->V3: - Put __percpu annotations in correct places. Reviewed-by: NPekka Enberg <penberg@kernel.org> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Christoph Lameter 提交于
The this_cpu_* options can be used to optimize __percpu_counter_add a bit. Avoids some address arithmetic and saves 12 bytes. Before: 00000000000001d3 <__percpu_counter_add>: 1d3: 55 push %rbp 1d4: 48 89 e5 mov %rsp,%rbp 1d7: 41 55 push %r13 1d9: 41 54 push %r12 1db: 53 push %rbx 1dc: 48 89 fb mov %rdi,%rbx 1df: 48 83 ec 08 sub $0x8,%rsp 1e3: 4c 8b 67 30 mov 0x30(%rdi),%r12 1e7: 65 4c 03 24 25 00 00 add %gs:0x0,%r12 1ee: 00 00 1f0: 4d 63 2c 24 movslq (%r12),%r13 1f4: 48 63 c2 movslq %edx,%rax 1f7: 49 01 f5 add %rsi,%r13 1fa: 49 39 c5 cmp %rax,%r13 1fd: 7d 0a jge 209 <__percpu_counter_add+0x36> 1ff: f7 da neg %edx 201: 48 63 d2 movslq %edx,%rdx 204: 49 39 d5 cmp %rdx,%r13 207: 7f 1e jg 227 <__percpu_counter_add+0x54> 209: 48 89 df mov %rbx,%rdi 20c: e8 00 00 00 00 callq 211 <__percpu_counter_add+0x3e> 211: 4c 01 6b 18 add %r13,0x18(%rbx) 215: 48 89 df mov %rbx,%rdi 218: 41 c7 04 24 00 00 00 movl $0x0,(%r12) 21f: 00 220: e8 00 00 00 00 callq 225 <__percpu_counter_add+0x52> 225: eb 04 jmp 22b <__percpu_counter_add+0x58> 227: 45 89 2c 24 mov %r13d,(%r12) 22b: 5b pop %rbx 22c: 5b pop %rbx 22d: 41 5c pop %r12 22f: 41 5d pop %r13 231: c9 leaveq 232: c3 retq After: 00000000000001d3 <__percpu_counter_add>: 1d3: 55 push %rbp 1d4: 48 63 ca movslq %edx,%rcx 1d7: 48 89 e5 mov %rsp,%rbp 1da: 41 54 push %r12 1dc: 53 push %rbx 1dd: 48 89 fb mov %rdi,%rbx 1e0: 48 8b 47 30 mov 0x30(%rdi),%rax 1e4: 65 44 8b 20 mov %gs:(%rax),%r12d 1e8: 4d 63 e4 movslq %r12d,%r12 1eb: 49 01 f4 add %rsi,%r12 1ee: 49 39 cc cmp %rcx,%r12 1f1: 7d 0a jge 1fd <__percpu_counter_add+0x2a> 1f3: f7 da neg %edx 1f5: 48 63 d2 movslq %edx,%rdx 1f8: 49 39 d4 cmp %rdx,%r12 1fb: 7f 21 jg 21e <__percpu_counter_add+0x4b> 1fd: 48 89 df mov %rbx,%rdi 200: e8 00 00 00 00 callq 205 <__percpu_counter_add+0x32> 205: 4c 01 63 18 add %r12,0x18(%rbx) 209: 48 8b 43 30 mov 0x30(%rbx),%rax 20d: 48 89 df mov %rbx,%rdi 210: 65 c7 00 00 00 00 00 movl $0x0,%gs:(%rax) 217: e8 00 00 00 00 callq 21c <__percpu_counter_add+0x49> 21c: eb 04 jmp 222 <__percpu_counter_add+0x4f> 21e: 65 44 89 20 mov %r12d,%gs:(%rax) 222: 5b pop %rbx 223: 41 5c pop %r12 225: c9 leaveq 226: c3 retq Reviewed-by: NPekka Enberg <penberg@kernel.org> Reviewed-by: NTejun Heo <tj@kernel.org> Reviewed-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
Add me and Christoph Lameter as maintainers for the percpu memory allocator. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Acked-by: NChristoph Lameter <cl@linux-foundation.org>
-
git://git.infradead.org/users/eparis/notify由 Linus Torvalds 提交于
* 'for-linus' of git://git.infradead.org/users/eparis/notify: fanotify: fill in the metadata_len field on struct fanotify_event_metadata fanotify: split version into version and metadata_len fanotify: Dont try to open a file descriptor for the overflow event fanotify: Introduce FAN_NOFD fanotify: do not leak user reference on allocation failure inotify: stop kernel memory leak on file creation failure fanotify: on group destroy allow all waiters to bypass permission check fanotify: Dont allow a mask of 0 if setting or removing a mark fanotify: correct broken ref counting in case adding a mark failed fanotify: if set by user unset FMODE_NONOTIFY before fsnotify_perm() is called fanotify: remove packed from access response message fanotify: deny permissions when no event was sent
-
git://git.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (28 commits) MIPS: Add a CONFIG_FORCE_MAX_ZONEORDER Kconfig option. MIPS: LD/SD o32 macro GAS fix update MIPS: Alchemy: fix build with SERIAL_8250=n MIPS: Rename mips_dma_cache_sync back to dma_cache_sync MIPS: MT: Fix typo in comment. SSB: Fix nvram_get on BCM47xx platform MIPS: BCM47xx: Swap serial console if ttyS1 was specified. MIPS: BCM47xx: Use sscanf for parsing mac address MIPS: BCM47xx: Fill values for b43 into SSB sprom MIPS: BCM47xx: Do not read config from CFE MIPS: FDT size is a be32 MIPS: Fix CP0 COUNTER clockevent race MIPS: Fix regression on BCM4710 processor detection MIPS: JZ4740: Fix pcm device name MIPS: Separate two consecutive loads in memset.S MIPS: Send proper signal and siginfo on FP emulator faults. MIPS: AR7: Fix loops per jiffies on TNETD7200 devices MIPS: AR7: Fix double ar7_gpio_init declaration MIPS: Rework GENERIC_HARDIRQS Kconfig. MIPS: Alchemy: Add return value check for strict_strtoul() ...
-
由 David Daney 提交于
For huge page support with base page size of 16K or 32K, we have to increase the MAX_ORDER so that huge pages can be allocated. [Ralf: I don't think a user should have to configure obscure constants like this but for the time being this will have to suffice.] Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1685/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
I am about to commit: http://sourceware.org/ml/binutils/2010-10/msg00033.html that fixes a problem with the LD/SD macro currently implemented by GAS for the o32 ABI in an inconsistent way. This is best illustrated with a simple program, which I'm copying here from the message above for easier reference: $ cat ld.s ld $5,32767($4) ld $5,32768($4) This gets assebled into the following output: $ mips-linux-as -32 -mips3 -o ld.o ld.s $ mips-linux-objdump -d ld.o ld.o: file format elf32-tradbigmips Disassembly of section .text: 00000000 <.text>: 0: dc857fff ld a1,32767(a0) 4: 3c010001 lui at,0x1 8: 00810821 addu at,a0,at c: 8c258000 lw a1,-32768(at) 10: 8c268004 lw a2,-32764(at) ... Oops! The GAS fix makes the macro behave in a consistent way and pairs of LW/SW instructions to be output as appropriate regardless of the size of the offset associated with the address used. The machine instruction is still available, but to reach it macros have to be disabled first. This has a side effect of requiring the use of a machine-addressable memory operand. As some platforms require 64-bit operations for accesses to some I/O registers LD/SD instructions are used in a couple of places in Linux regardless of the ABI selected. Here's a fix for some pieces of code affected I've been able to track down. The fix should be backwards compatible with all supported binutils releases in existence and can be used as a reference for any other places or off-tree code. The use of the "R" constraint guarantees a machine-addressable operand. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1680/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Manuel Lauss 提交于
In commit 7d172bfe ("Alchemy: Add UART PM methods") I introduced platform PM methods which call a function of the 8250 driver; this patch works around link failures when the kernel is built without 8250 support. Signed-off-by: NManuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/1737/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
This fixes IP22 and IP28 build errors. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Hauke Mehrtens 提交于
The nvram_get function was never in the mainline kernel, it only existed in an external OpenWrt patch. Use nvram_getenv function, which is in mainline and use an include instead of an extra function declaration. et0macaddr contains the mac address in text from like 00:11:22:33:44:55. We have to parse it before adding it into macaddr. nvram_parse_macaddr will be merged into asm/mach-bcm47xx/nvram.h through the MIPS git tree and will be available soon. It will not build now without nvram_parse_macaddr, but it hasn't before either. Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de> To: linux-mips@linux-mips.org Cc: mb@bu3sch.de Cc: netdev@vger.kernel.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: NMichael Buesch <mb@bu3sch.de> Patchwork: https://patchwork.linux-mips.org/patch/1849/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Hauke Mehrtens 提交于
Some devices like the Netgear WGT634U are using ttyS1 for default console output. We should switch to that console if it was given in the kernel_args parameters. Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de> To: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/1848/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Hauke Mehrtens 提交于
Instead of writing own function for parsing the mac address we now use sscanf. Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de> To: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/1847/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Hauke Mehrtens 提交于
Fill the sprom with all available values from the nvram. Most of these new values are needed for the b43 or b43legacy driver. Parts of this patch have been in OpenWRT for a long time and were written by Michael Buesch. Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de> To: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/1846/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Hauke Mehrtens 提交于
The config options read out here are not stored in CFE but only in NVRAM on the devices. Remove reading from CFE and only access the NVRAM. Reading out CFE does not harm but is useless here. Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de> To: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/1845/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Chou 提交于
The totalsize field was be32. And the reserve bootmem would cause failure. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> To: devicetree-discuss@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: grant.likely@secretlab.ca Cc: David Daney <ddaney@caviumnetworks.com> Cc: Dezhong Diao <dediao@cisco.com> Patchwork: https://patchwork.linux-mips.org/patch/1838/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Kevin Cernekee 提交于
Consider the following test case: write_c0_compare(read_c0_count()); Even if the counter doesn't increment during execution, this might not generate an interrupt until the counter wraps around. The CPU may perform the comparison each time CP0 COUNT increments, not when CP0 COMPARE is written. If mips_next_event() is called with a very small delta, and CP0 COUNT increments during the calculation of "cnt += delta", it is possible that CP0 COMPARE will be written with the current value of CP0 COUNT. If this is detected, the function should return -ETIME, to indicate that the interrupt might not have actually gotten scheduled. Signed-off-by: NKevin Cernekee <cernekee@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1836/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Kevin Cernekee 提交于
BCM4710 uses the BMIPS32 core (like BCM6345), not the MIPS 4Kc core as was previously believed. Signed-off-by: NKevin Cernekee <cernekee@gmail.com> Tested-by: NAlexandros C. Couloumbis <alex@ozo.com> Patchwork: https://patchwork.linux-mips.org/patch/1837/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Lars-Peter Clausen 提交于
As part the ASoC multi-component patch (commit f0fba2ad) the jz4740 pcm driver was renamed to 'jz4740-pcm-audio'. Adjust the device name accordingly. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1770/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Tony Wu 提交于
partial_fixup is used in noreorder block. Separating two consecutive loads can save one cycle on processors with GPR intrelock and can fix load-use on processors that need a load delay slot. Also do so for fwd_fixup. [Ralf: Only R2000/R3000 class processors are lacking the the load-user interlock and even some of those got it retrofitted. With R2000/R3000 being fairly uncommon these days the impact of this bug should be minor.] Signed-off-by: NTony Wu <tung7970@gmail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1768/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
We were unconditionally sending SIGBUS with an empty siginfo on FP emulator faults. This differs from what happens when real floating point hardware would get a fault. For most faults we need to send SIGSEGV with the faulting address filled in in the struct siginfo. Reported-by: NCamm Maguire <camm@maguirefamily.org> Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: Camm Maguire <camm@maguirefamily.org> Patchwork: https://patchwork.linux-mips.org/patch/1727/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
TNETD7200 run their CPU clock faster than the default CPU clock we assume. In order to have the correct loops per jiffies settings, initialize clocks right before setting mips_hpt_frequency. As a side effect, we can no longer use msleep in clocks.c which requires other parts of the kernel to be initialized, so replace these with mdelay. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1749/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
Signed-off-by: NFlorian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1748/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Recent changes to CONFIG_GENERIC_HARDIRQS have caused us to start getting: warning: (SMP && SYS_SUPPORTS_SMP) selects IRQ_PER_CPU which has unmet direct dependencies (HAVE_GENERIC_HARDIRQS) Rearranging our Kconfig quiets the message. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: Thomas Gleixner <tglx@linutronix.de> Patchwork: https://patchwork.linux-mips.org/patch/1757/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-