Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>

Currently we do break out of the for() loop, but we also need to
break out of the enclosing do {} while()...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>

These are needed when v3 and v4 are not enabled.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

v2 doesn't have commits, so this function can be a no-op.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This is only when CONFIG_NFS_V4_1 isn't enabled.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Acked-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the allocation of nfs_write_header fails, the list of nfs_pages that
needs to be cleaned up is still on desc->pg_list...
Reported-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: NFred Isaman <iisaman@netapp.com>

Now that I'm doing secinfo automatically in the v4 code this extra
argument isn't needed.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This simplifies the code for v2 and v3 and gives v4 a chance to decide
on referrals without needing to modify the generic client.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

And also remove the unneeded rpc_op.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This is a bugfix that applies on top of the previous directio patches,
that fixes a bug introduced in "NFS: create struct nfs_commit_info".
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This also has the advantage that it allows directio to use pnfs.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Need this to pass into nfs_commitdata_init, in order to keep data->dreq
accurate.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Factors out the code that needs to change when directio
starts using these code paths.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

It is COMMIT that is handled the most differently between
the paged and direct paths.  Create a structure that encapsulates
everything either path needs to know about the commit state.

We could use void to hide some of the layout driver stuff, but
Trond suggests pulling it out to ensure type checking, given the
huge changes being made, and the fact that it doesn't interfere
with other drivers.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Simple refactoring.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This also has the advantage that it allows directio to use pnfs.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The coalesce code made assumptions that will no longer be true once
non-page aligned io occurs.  This introduces no change in
current behavior, but allows for more general situations to come.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Factors out the code that will need to change when directio
starts using these code paths.  This will allow directio to use
the generic pagein and flush routines
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Decouple nfs_pgio_header and nfs_write_data, and have (possibly
multiple) nfs_write_datas each take a refcount on nfs_pgio_header.

For the moment keeps nfs_write_header as a way to preallocate a single
nfs_write_data with the nfs_pgio_header.  The code doesn't need this,
and would be prettier without, but given the amount of churn I am
already introducing I didn't want to play with tuning new mempools.

This also fixes bug in pnfs_ld_handle_write_error.  In the case of
desc->pg_bsize < PAGE_CACHE_SIZE, the pages list was empty, causing
replay attempt to do nothing.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Decouple nfs_pgio_header and nfs_read_data, and have (possibly
multiple) nfs_read_datas each take a refcount on nfs_pgio_header.

For the moment keeps nfs_read_header as a way to preallocate a single
nfs_read_data with the nfs_pgio_header.  The code doesn't need this,
and would be prettier without, but given the amount of churn I am
already introducing I didn't want to play with tuning new mempools.

This also fixes bug in pnfs_ld_handle_read_error.  In the case of
desc->pg_bsize < PAGE_CACHE_SIZE, the pages list was empty, causing
replay attempt to do nothing.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Both nfs_read_data and nfs_write_data devote several fields which
can be combined into a single shared struct.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In order to avoid duplicating all the data in nfs_read_data whenever we
split it up into multiple RPC calls (either due to a short read result
or due to rsize < PAGE_SIZE), we split out the bits that are the same
per RPC call into a separate "header" structure.

The goal this patch moves towards is to have a single header
refcounted by several rpc_data structures.  Thus, want to always refer
from rpc_data to the header, and not the other way.  This patch comes
close to that ideal, but the directio code currently needs some
special casing, isolated in the nfs_direct_[read_write]hdr_release()
functions.  This will be dealt with in a future patch.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Make it consistent with nfs_initiate_commit.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Commits don't need the vectors of pages, etc. that writes do. Split out
a separate structure for the commit operation.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Also create a commit_info structure to hold the bucket array and push
it up from the lseg to the layout where it really belongs.

While we are at it, fix a refcounting bug due to an (incorrect)
implicit assumption that filelayout_scan_ds_commit_list always
completely emptied the src list.

This clarifies refcounting, removes the ugly find_only_write_lseg
functions, and pushes the file layout commit code along on the path to
supporting multiple lsegs.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The two functions had diverged quite a bit, with the write function
being a bit more robust than the read.

However, these still break badly in the desc->pg_bsize < PAGE_CACHE_SIZE case,
as then there is nothing hanging on the data->pages list, and the resend
ends up doing nothing.  This will be fixed in a patch later in the series.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This fixes a compiler warning.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The authflavor is set in an nfs_clone_mount structure and passed to the
xdev_mount() functions where it was promptly ignored.  Instead, use it
to initialize an rpc_clnt for the cloned server.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

I create a new proc_lookup_mountpoint() to use when submounting an NFS
v4 share.  This function returns an rpc_clnt to use for performing an
fs_locations() call on a referral's mountpoint.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Whenever lookup sees wrongsec do a secinfo and retry the lookup to find
attributes of the file or directory, such as "is this a referral
mountpoint?".  This also allows me to remove handling -NFS4ERR_WRONSEC
as part of getattr xdr decoding.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We don't want to return -NFS4ERR_WRONGSEC to the VFS because it could
cause the kernel to oops.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

I was using the same decoder function for SECINFO and SECINFO_NO_NAME,
so it was returning an error when it tried to decode an OP_SECINFO_NO_NAME
header as OP_SECINFO.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

v2: recursion was replaced by loop

If client is a clone, then it's parent can not be in the list.
But parent's Pipefs dentries have to be created and destroyed.

Note: event skip helper for clients introduced
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

There can be a case, when on MOUNT event RPC client (after it's dentries were
created) is not longer hold by anyone except notification callback.
I.e. on release this client will be destoroyed. And it's dentries have to be
destroyed as well. Which in turn requires per-net PipeFS superblock to be set.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>