Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a new option "subsystem" to override the PCI SSID for identifying
the card type.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a new function to look up a quirk entry with the given PCI SSID
instead of a pci device pointer.  This can be used when the searched ID
is overridden for debugging or such a purpose.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The previous jiffies delta was 0 in all cases. Use hw_ptr variable to
store and print original value.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Conflicts:
	include/sound/version.h

The XO's audio hardware is wired up to allow DC sensors (e.g. light
sensors, thermistors, etc) to be plugged in through the microphone jack.

Add sound mixer controls to allow this mode to be enabled and tweaked.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The XO-1.5 has a microphone LED designed to indicate to the user when
something is being recorded.

This light is controlled by the microphone bias voltage and it is
currently coming on all the time.

This patch defers the microphone port configuration until when recording
is actually taking place, fixing the behaviour of the LED.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Merge branch 'topic/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into devel

Added patch for Hewlett-Packard Company Device Subsystem id - 103c:30ea.
Signed-off-by: NKen Prox <kprox@users.sourceforge.net>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The WM9705 and WM9703 ops are the same actually so use
the same code for both.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

When runtime->periods == 1 or when pointer crosses end of ring buffer,
the delta might be greater than buffer_size.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

As noted by pl bossart <bossart.nospam@gmail.com>, the PCM I/O routines
(snd_pcm_lib_write1, snd_pcm_lib_read1) should block wake_up() calls
until all samples are not processed.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Do general cleanup in snd_pcm_update_hw_ptr*() routines and merge them.
The main change is hw_ptr_interrupt variable removal to simplify code
logic. This variable can be computed directly from hw_ptr.

Ensure that updated hw_ptr is not lower than previous one (it was possible
with old code in some obscure situations when interrupt was delayed or
the lowlevel driver returns wrong ring buffer position value).
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

In some debug cases, it might be usefull to see previous ring buffer
positions to determine position problems from the lowlevel drivers.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

To increase code readability, convert send xrun_debug() argument to
use defines.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Detect the HVR-950Q HVR-850 urb data alignment quirk using usbquirk.h
rather than using a case statement in snd_usb_audio_probe.
Signed-off-by: NJohn S. Gruber <JohnSGruber@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Addressing audio quality problem.

In sound/usb/usbaudio.c, for the Hauppage HVR-950Q and HVR-850 only, change
retire_capture_urb to allow transfers on audio sub-slot boundaries rather
than audio slots boundaries.

With these devices the left and right channel samples can be split between
two different urbs. Throwing away extra channel samples causes a sound
quality problem for stereo streams as the left and right channels are
swapped repeatedly, perhaps many times per second.

Urbs unaligned on sub-slot boundaries are still truncated to the next
lowest stride (audio slot) to retain synchronization on samples even
though left/right channel synchronization may be lost in this case.

Detect the quirk using a case statement in snd_usb_audio_probe.

BugLink: https://bugs.launchpad.net/ubuntu/+bug/495745Signed-off-by: NJohn S. Gruber <JohnSGruber@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since there are devices that do not align the size of their data packets
to frame boundaries, the driver needs to be able to keep track of
partial frames.  This patch prepares for support for such devices by
changing the hwptr_done variable from a frame counter to a byte counter.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added functionality:
1) Extension Units support (all XU settings now available at alsamixer,
   kmix, etc):
- "AnalogueIn soft limiter" switch;
- "Sample rate" selector (values 0,1,2,3,4,5 corresponds to 44.1 48 ...
  192 kHz);
- "DigitalIn CLK source" selector (internal/external) (**);
- "DigitalOut format SPDIF/AC3" switch (**);
(**)E-mu-0404usb only.

2) Automatic device sample rate adjustment depending on substream
   samplerate for both capture and playback substream.

[minor coding-style fixes by tiwai]
Signed-off-by: NSergiy Kovalchuk <cnb_zerg@yahoo.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch converts the alc889 Aspire-specific powerdown to a generic
one. Like the previous effort, it currently only handles Front and PCM
but can be easily extended to cover other nids. The existing hook for
alc889 Aspire-specific remains enabled. Upon further testing, I've added
its use for ALC861_AUTO as well. Following patches will enable them for
other quirks.
Tested-by: NDr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch ports powerdown fixes to AD198x. Currently we only turn off
Front and HP for suspend, but this is easily extended for additional
nids.
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Rewrite the codes to use strict_strtoul() instead of simple_strtoul().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Check whether the given NID is a pin widget before storing the
user-defined pin configs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Call snd_hda_shutup_pins() at suspend and free for avoiding click noises.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a common helper function for clearing pin controls before suspend.
Use the pincfg array instead of looking through all widget tree.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

gpio_led, gpio_led_polarity and gpio_mute are added now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When we run the following commands in turn (with
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0),

	speaker-test -Dhw:0,3 -c2 -twav  # HDMI
	speaker-test -Dhw:0,0 -c2 -twav  # Analog

The second command will produce sound in the analog lineout _as well as_
HDMI sink. The root cause is, device 0 "reuses" the same stream tag that
was used by device 3, and the "intelhdmi - sticky stream id" patch leaves
the HDMI codec in a functional state. So the HDMI codec happily accepts
the audio samples which reuse its stream tag.

The proposed solution is to remember the last device each azx_dev was
assigned to, and prefer to
1) reuse the azx_dev (and hence the stream tag) the HDMI codec last used
2) or assign a never-used azx_dev for HDMI

With this patch and the above two speaker-test commands,
HDMI codec will use stream tag 8 and Analog codec will use 5.

The stream tag used by HDMI codec won't be reused by others, as long
as we don't run out of the 4 playback azx_dev's. The legacy Analog
codec will continue to use stream tag 5 because its device id is 0
(this is a bit tricky).
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Narrow the dma and irq selection after the DOS driver.

Add ALSA configuration description as well.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

* 'sysctl' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-misc-2.6:
  SYSCTL: Add a mutex to the page_alloc zone order sysctl
  SYSCTL: Print binary sysctl warnings (nearly) only once

* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6:
  HWPOISON: Add PROC_FS dependency to hwpoison injector v2

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (34 commits)
  classmate-laptop: add support for Classmate PC ACPI devices
  hp-wmi: Fix two memleaks
  acer-wmi, msi-wmi: Remove needless DMI MODULE_ALIAS
  dell-wmi: do not keep driver loaded on unsupported boxes
  wmi: Free the allocated acpi objects through wmi_get_event_data
  drivers/platform/x86/acerhdf.c: check BIOS information whether it begins with string of table
  acerhdf: add new BIOS versions
  acerhdf: limit modalias matching to supported
  toshiba_acpi: convert to seq_file
  asus_acpi: convert to seq_file
  ACPI: do not select ACPI_DOCK from ATA_ACPI
  sony-laptop: enumerate rfkill devices using SN06
  sony-laptop: rfkill support for newer models
  ACPI: fix OSC regression that caused aer and pciehp not to load
  MAINTAINERS: add maintainer for msi-wmi driver
  fujitu-laptop: fix tests of acpi_evaluate_integer() return value
  arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c: avoid cross-CPU interrupts by using smp_call_function_any()
  ACPI: processor: remove _PDC object list from struct acpi_processor
  ACPI: processor: change acpi_processor_set_pdc() interface
  ACPI: processor: open code acpi_processor_cleanup_pdc
  ...

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2/trivial: Use le16_to_cpu for a disk value in xattr.c
  ocfs2/trivial: Use proper mask for 2 places in hearbeat.c
  Ocfs2: Let ocfs2 support fiemap for symlink and fast symlink.
  Ocfs2: Should ocfs2 support fiemap for S_IFDIR inode?
  ocfs2: Use FIEMAP_EXTENT_SHARED
  fiemap: Add new extent flag FIEMAP_EXTENT_SHARED
  ocfs2: replace u8 by __u8 in ocfs2_fs.h
  ocfs2: explicit declare uninitialized var in user_cluster_connect()
  ocfs2-devel: remove redundant OCFS2_MOUNT_POSIX_ACL check in ocfs2_get_acl_nolock()
  ocfs2: return -EAGAIN instead of EAGAIN in dlm
  ocfs2/cluster: Make fence method configurable - v2
  ocfs2: Set MS_POSIXACL on remount
  ocfs2: Make acl use the default
  ocfs2: Always include ACL support

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  VIDEO: cyberpro: pci_request_regions needs a persistent name
  ARM: dma-isa: request cascade channel after registering it
  ARM: footbridge: trim down old ISA rtc setup
  ARM: fix PAGE_KERNEL
  ARM: Fix wrong shared bit for CPU write buffer bug test
  ARM: 5857/1: ARM: dmabounce: fix build
  ARM: 5856/1: Fix bug of uart0 platfrom data for nuc900
  ARM: 5855/1: putc support for nuc900
  ARM: 5854/1: fix compiling error for NUC900
  ARM: 5849/1: ARMv7: fix Oprofile events count
  ARM: add missing include to nwflash.c
  ARM: Kill CONFIG_CPU_32
  ARM: Convert VFP/Crunch/XscaleCP thread_release() to exit_thread()
  ARM: 5853/1: ARM: Fix build break on ARM v6 and v7