- 25 10月, 2010 33 次提交
-
-
由 Jongpill Lee 提交于
This patch updates MAX_COMBINER_NR from 39 to 40 because S5PV310 need 39th combiner for including EINT16_31. Signed-off-by: NJongpill Lee <boyko.lee@samsung.com> Signed-off-by: NSangbeom Kim <sbkim73@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Seungwhan Youn 提交于
This patch adds warning about changing EPLL rate to notice that other driver that controls H/W, which is using EPLL, will has unknown effects by this EPLL rate change. Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com> Acked-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Seungwhan Youn 提交于
This patch adds EPLL specific clock get_rate/set_rate operations on S5PV210. Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com> Acked-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Seungwhan Youn 提交于
This patch fix wrong EPLL getting on setup clocks on S5PV210. Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com> Acked-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Seungwhan Youn 提交于
S5P Samsung SoCs has a EPLL to support various PLL clock sources for other H/W blocks. Until now, to control EPLL, each of SoCs make their own functions in 'mach-s5pxxx/clock.c'. But some of functions, 'xxx_epll_get_rate()' and 'xxx_epll_enable()', are exactly same in all S5P SoCs, so this patch move these duplicated codes to common EPLL functions that use platform wide. Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com> Acked-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Seungwhan Youn 提交于
This patch adds audio clocks(SCLK_AUDIO{0,1,2} and SCLK_AUDIO) to be initial as a sysclk on boot-time. Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com> Acked-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Seungwhan Youn 提交于
This patch add SCLK_SPDIF clock to support source clock of S/PDIF on S5PV210. Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com> Acked-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Seungwhan Youn 提交于
This patch add S/PDIF platform device to support S/PDIF PCM audio on S5PV210. Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com> Acked-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Seungwhan Youn 提交于
This patch add SCLK_SPDIF clock to support source clock of S/PDIF on S5PC100. Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com> Acked-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Seungwhan Youn 提交于
This patch modify SCLK_AUDIO{0,1,2} to be initial as sysclks on boot-time. Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com> Acked-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Seungwhan Youn 提交于
This patch add S/PDIF platform device to support S/PDIF PCM audio on S5PC100. Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com> Acked-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
Since it's exported we should make sure we're using the prototype others see. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
Since it's exported we should make sure we're using the prototype others see. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Jaecheol Lee 提交于
This patch adds ARCH_HAS_CPUFREQ in arch/arm/Kconfig for S5PV210, and updates mach-s5pv210/Makefile for supporting build CPUFREQ driver. Signed-off-by: NJaecheol Lee <jc.lee@samsung.com> Signed-off-by: NSangbeom Kim <sbkim73@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Jaecheol Lee 提交于
This patch adds CPUFREQ driver for supporting DFS(Dynamic Frequency Scaling). Signed-off-by: NJaecheol Lee <jc.lee@samsung.com> Signed-off-by: NSangbeom Kim <sbkim73@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Jaecheol Lee 提交于
This patch adds some CMU(Clock Management Unit) registers for supporting CPUFREQ and some drivers. Signed-off-by: NJaecheol Lee <jc.lee@samsung.com> Signed-off-by: NSangbeom Kim <sbkim73@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Jaecheol Lee 提交于
This patch adds MOUT_DMC0 and SCLK_DMC0 for checking the dmc0 clock in CPUFREQ driver. Signed-off-by: NJaecheol Lee <jc.lee@samsung.com> Signed-off-by: NSangbeom Kim <sbkim73@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Jaecheol Lee 提交于
Current fout_apll has fixed rate value. So CPUFREQ driver gets incorrect value when finding current CPU frequency. Because some operation level need to change APLL. Added get_rate function for fout_apll can give correct frequency value when calling get_rate function. Signed-off-by: NJaecheol Lee <jc.lee@samsung.com> Signed-off-by: NSangbeom Kim <sbkim73@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kyungmin Park 提交于
S5PV310 and S5PC210 support more I2C devices than previous SoCs. Add the device support code for them. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kyungmin Park 提交于
S5PV310 and S5PC210 support total 8 (+ 1 dedicated for HDMI) I2C devices. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kyungmin Park 提交于
The name of the I2C2 and I2C3 interrupt should be IIC2 and IIC3 instead of CAN0 and CAN1. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch changes I2C2 and I2C3 interrupt name from IRQ_CANX to IRQ_IICX according other SoCs' I2C interrupt naming rule. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
Basically S5P SoCs use the Samsung common VA address mapping where plat-samsung and use plat-s5p's mapping also. The later is a little mess. So this patch cleans it up. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kyungmin Park 提交于
Camera devices use the I2C0 and Gyro uese the I2C1 on universal board. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor title fixes] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kyungmin Park 提交于
OneNAND device support for Universal board. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor title fixes] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Jeongbae Seo 提交于
This patch adds clock types into platform data to support external clock divider instead of internal clock divider. It is defined that what kinds of clock type is used in machine. Signed-off-by: NJeongbae Seo <jeongbae.seo@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Hyuk Lee 提交于
This patch adds to change bus width and host capability of HSMMC, when HSMMC is only configured with another value of bus width and host capability from default one. Signed-off-by: NHyuk Lee <hyuk1.lee@samsung.com> Signed-off-by: NJeongbae Seo <jeongbae.seo@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Hyuk Lee 提交于
This patch adds support HSMMC for S5PV310(SMDKV310) and S5PC210(SMDKC210). Signed-off-by: NHyuk Lee <hyuk1.lee@samsung.com> Signed-off-by: NJeongbae Seo <jeongbae.seo@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Hyuk Lee 提交于
This patch adds initialization HSMMC device information. And HSMMC platform data like card detect, data bus width and capability is configured. Signed-off-by: NHyuk Lee <hyuk1.lee@samsung.com> Signed-off-by: NJeongbae Seo <jeongbae.seo@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Hyuk Lee 提交于
This patch adds support HSMMC for S5PV310 and S5PC210 and setup for HSMMC host controller and also related GPIO. At most 4 channel can be used at the same time. A user can configure SDHCI data bus as 8bit or 4bit. Signed-off-by: NHyuk Lee <hyuk1.lee@samsung.com> Signed-off-by: NJeongbae Seo <jeongbae.seo@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch clean up the GPIO code and removes useless GPIO addresses. It can be calculated with offset, the 'base' member of s3c_gpio_chip is also initialized in the init function. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
-
由 Kukjin Kim 提交于
When merged patches, missed IRQ_EINT_BIT() definition from commit ea31fd43 (ARM: S5PV210: Add Power Management Support). The IRQ_EINT_BIT() is used in the Power Management operation (plat-samsung/pm.c). Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 23 10月, 2010 7 次提交
-
-
由 Mark Brown 提交于
When converting to use s3c_gpio_cfgpin_range() the function for the IISv4 block appears to have been typoed as 4 (the keypad) rather than 5 as it should be. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch changes code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. NOTE: This is for missed things from the previous patch. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch changes code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. NOTE: This is for missed things from the previous patch. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch changes code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. NOTE: This is for missed things from the previous patch. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Ben Dooks 提交于
Change code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Ben Dooks 提交于
Change code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Ben Dooks 提交于
Change code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-