commit 6899b4f7c99c72968e58e502f96084f74f6e5e86 upstream.

Fix null pointer issue if resource_size is called with no ioresource.
Signed-off-by: NLudovic Barre <ludovic.barre@st.com>
Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: NJassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 749c9e553e1f063eb132a78d80225532cbfedb80 upstream.

Fixes parent clock for axi, fdcan, sai and adc12 clocks.

Fixes: e51d297e ("clk: stm32mp1: add Sub System clocks")
Signed-off-by: NGabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 72cfd1ad1057f16fc614861b3c271597995e57ba upstream.

STM32MP1 clock IP offers lots of Kernel clocks that are shared
by multiple IP's at the same time.
Then boot loader applies a clock tree that allows to use all IP's
at same time and with the maximum of performance.
Not change parents on a change rate on kernel clocks ensures
the integrity of the system.
Signed-off-by: NGabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 140fc4e406fac420b978a0ef2ee1fe3c641a6ae4 upstream.

index 8: ck_mcu is divided by 256 (not 512)

Fixes: e51d297e ("clk: stm32mp1: add Sub System clocks")
Signed-off-by: NGabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d3f2e33c875de5052e032a9eefa64c897a930ed1 upstream.

The divider of HSI (clk-hsi-div) is power of two divider.

Fixes: 9bee94e7 ("clk: stm32mp1: Introduce STM32MP1 clock driver")
Signed-off-by: NGabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit af0d4442dd6813de6e77309063beb064fa8e89ae upstream.

No remove function implemented yet in the driver.
Without remove function, the pm_runtime implementation
complains when removing and probing again the driver.
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ab41b99e7e55c85f29ff7b54718ccbbe051905e7 upstream.

Start streaming was sometimes failing because of pm_runtime_get_sync()
non-0 return value. In fact return value was not an error but a
positive value (1), indicating that PM was already enabled.
Fix this by going to error path only with negative return value.
Signed-off-by: NHugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b3ce6f6ff3c260ee53b0f2236e5fd950d46957da upstream.

Avoid call of dmaengine_terminate_all() between
dmaengine_prep_slave_single() and dmaengine_submit() by locking
the whole DMA submission sequence.
Signed-off-by: NHugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0acabecebc912b3ba06289e4ef40476acc499a37 upstream.

Correct condition for the second hmac loop. Key must be only
set in the first loop. Initial condition was wrong,
HMAC_KEY flag was not properly checked.
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1cb0d2aee26335d0bccf29100c7bed00ebece851 upstream.

Upstream commit 58e75155009c ("HID: core: move Usage Page concatenation
to Main item") adds support for Usage Page item after Usage ID items
(such as keyboards manufactured by Primax).

Usage Page concatenation in Main item works well for following report
descriptor patterns:

    USAGE_PAGE (Keyboard)                   05 07
    USAGE_MINIMUM (Keyboard LeftControl)    19 E0
    USAGE_MAXIMUM (Keyboard Right GUI)      29 E7
    LOGICAL_MINIMUM (0)                     15 00
    LOGICAL_MAXIMUM (1)                     25 01
    REPORT_SIZE (1)                         75 01
    REPORT_COUNT (8)                        95 08
    INPUT (Data,Var,Abs)                    81 02

-------------

    USAGE_MINIMUM (Keyboard LeftControl)    19 E0
    USAGE_MAXIMUM (Keyboard Right GUI)      29 E7
    LOGICAL_MINIMUM (0)                     15 00
    LOGICAL_MAXIMUM (1)                     25 01
    REPORT_SIZE (1)                         75 01
    REPORT_COUNT (8)                        95 08
    USAGE_PAGE (Keyboard)                   05 07
    INPUT (Data,Var,Abs)                    81 02

But it makes the parser act wrong for the following report
descriptor pattern(such as some Gamepads):

    USAGE_PAGE (Button)                     05 09
    USAGE (Button 1)                        09 01
    USAGE (Button 2)                        09 02
    USAGE (Button 4)                        09 04
    USAGE (Button 5)                        09 05
    USAGE (Button 7)                        09 07
    USAGE (Button 8)                        09 08
    USAGE (Button 14)                       09 0E
    USAGE (Button 15)                       09 0F
    USAGE (Button 13)                       09 0D
    USAGE_PAGE (Consumer Devices)           05 0C
    USAGE (Back)                            0a 24 02
    USAGE (HomePage)                        0a 23 02
    LOGICAL_MINIMUM (0)                     15 00
    LOGICAL_MAXIMUM (1)                     25 01
    REPORT_SIZE (1)                         75 01
    REPORT_COUNT (11)                       95 0B
    INPUT (Data,Var,Abs)                    81 02

With Usage Page concatenation in Main item, parser recognizes all the
11 Usages as consumer keys, it is not the HID device's real intention.

This patch checks whether Usage Page is really defined after Usage ID
items by comparing usage page using status.

Usage Page concatenation on currently defined Usage Page will always
do in local parsing when Usage ID items encountered.

When Main item is parsing, concatenation will do again with last
defined Usage Page if this page has not been used in the previous
usages concatenation.
Signed-off-by: NCandle Sun <candle.sun@unisoc.com>
Signed-off-by: NNianfu Bai <nianfu.bai@unisoc.com>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Cc: Siarhei Vishniakou <svv@google.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 88f8598d0a302a08380eadefd09b9f5cb1c4c428 upstream.

Previously TCP only warns if its RTO timer fires and the
retransmission queue is empty, but it'll cause null pointer
reference later on. It's better to avoid such catastrophic failure
and simply exit with a warning.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reviewed-by: NNeal Cardwell <ncardwell@google.com>
Reviewed-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dba9a3dfe912dc47c9dbc9ba1f5f65adbf9aea0f upstream.

Add spinlock protection on IPCC register update to avoid race condition.
Without this fix, stm32_ipcc_set_bits and stm32_ipcc_clr_bits can be
called in parallel for different channels. This results in register
corruptions.
Signed-off-by: NArnaud Pouliquen <arnaud.pouliquen@st.com>
Reviewed-by: NFabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: NJassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cbb32079149dbf557fa3f7bab8fa3c5fec857da7 upstream.

Revert shift by 8 of state->base.alpha. This introduced a
regression on planes.

Fixes: 7f73c10b ("drm/atmel-hclcdc: Convert to the new generic alpha property")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: NClaudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1556195748-11106-7-git-send-email-claudiu.beznea@microchip.comSigned-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 84a1c2109d23df3543d96231c4fee1757299bb1a upstream.

The "params->size" is defined as "u64".
And "info->sector_size" and "info->n_sectors" are defined as
unsigned int and u16.
Thus, u64 data might have strange data(loss data) if the result
overflows an unsigned int.
This patch casts "info->sector_size" to an u64.
Signed-off-by: Nhuijin.park <huijin.park@samsung.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a12085d13997ed15f745f33a0e01002541160179 upstream.

of_find_device_by_node() takes a reference to the struct device
when it finds a match via get_device, there is no need to call
get_device() twice.
We also should make sure to drop the reference to the device
taken by of_find_device_by_node() on driver unbind.

Fixes: f88fc122 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Signed-off-by: NWen Yang <yellowriver2010@hotmail.com>
Suggested-by: NBoris Brezillon <bbrezillon@kernel.org>
Reviewed-by: NBoris Brezillon <bbrezillon@kernel.org>
Reviewed-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Acked-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Cc: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: linux-mtd@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e39bb786816453788836c367caefd72eceea380c upstream.

Wrong copy/paste from the previous block, the error message should
refer to #size-cells instead of #address-cells.

Fixes: f88fc122 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a62520473f15750cd1432d36b377a06cd7cff8d2 upstream.

Make sure SKBTX_HW_TSTAMP (i.e. SOF_TIMESTAMPING_TX_HARDWARE) has been
enabled for this skb. It does fix the issue where normal socks that
aren't expecting a timestamp will not wake up on select, but when a
user does want a SOF_TIMESTAMPING_TX_HARDWARE it does work.
Signed-off-by: NPaul Thomas <pthomas8589@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7ad342bc58cc5197cd2f12a3c30b3949528c6d83 upstream.

The subns increment register has 24 bits as follows:
RegBit[15:0] = Subns[23:8]; RegBit[31:24] = Subns[7:0]

Fix the same in the driver and increase sub ns resolution to the
best capable, 24 bits. This should be the case on all GEM versions
that this PTP driver supports.
Signed-off-by: NHarini Katakam <harini.katakam@xilinx.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8632944841d41a36d77dd1fa88d4201b5291100f upstream.

WDD value must be always set to max (0xFFF) otherwise the hardware
block will reset the board on the first ping of the watchdog.
Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4ea99936a1630f51fc3a2d61a58ec4a1c4b7d55a upstream.

It's possible to specify a non-zero s_want_extra_isize via debugging
option, and this can cause bad things(tm) to happen when using a file
system with an inode size of 128 bytes.

Add better checking when the file system is mounted, as well as when
we are actually doing the trying to do the inode expansion.

Link: https://lore.kernel.org/r/20191110121510.GH23325@mit.edu
Reported-by: syzbot+f8d6f8386ceacdbfff57@syzkaller.appspotmail.com
Reported-by: syzbot+33d7ea72e47de3bdf4e1@syzkaller.appspotmail.com
Reported-by: syzbot+44b6763edfc17144296f@syzkaller.appspotmail.com
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 61183b056b49e2937ff92a1424291ba36a6f6d05 ]

This driver forgets to kill tasklet in remove.
Add the call to fix it.

Fixes: 032dc41b ("net: macb: Handle HRESP error")
Signed-off-by: NChuhong Yuan <hslester96@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 14e54ab9143fa60794d13ea0a66c792a2046a8f3 ]

When a classful qdisc's child qdisc has set the flag
TCQ_F_CPUSTATS (pfifo_fast for example), the child qdisc's
cpu_bstats should be passed to gnet_stats_copy_basic(),
but many classful qdisc didn't do that. As a result,
`tc -s class show dev DEV` always return 0 for bytes and
packets in this case.

Pass the child qdisc's cpu_bstats to gnet_stats_copy_basic()
to fix this issue.

The qstats also has this problem, but it has been fixed
in 5dd431b6b9 ("net: sched: introduce and use qstats read...")
and bstats still remains buggy.

Fixes: 22e0f8b9 ("net: sched: make bstats per cpu and estimator RCU safe")
Signed-off-by: NDust Li <dust.li@linux.alibaba.com>
Signed-off-by: NTony Lu <tonylu@linux.alibaba.com>
Acked-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 312434617cb16be5166316cf9d08ba760b1042a1 ]

This patch is to fix a data-race reported by syzbot:

  BUG: KCSAN: data-race in sctp_assoc_migrate / sctp_hash_obj

  write to 0xffff8880b67c0020 of 8 bytes by task 18908 on cpu 1:
    sctp_assoc_migrate+0x1a6/0x290 net/sctp/associola.c:1091
    sctp_sock_migrate+0x8aa/0x9b0 net/sctp/socket.c:9465
    sctp_accept+0x3c8/0x470 net/sctp/socket.c:4916
    inet_accept+0x7f/0x360 net/ipv4/af_inet.c:734
    __sys_accept4+0x224/0x430 net/socket.c:1754
    __do_sys_accept net/socket.c:1795 [inline]
    __se_sys_accept net/socket.c:1792 [inline]
    __x64_sys_accept+0x4e/0x60 net/socket.c:1792
    do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

  read to 0xffff8880b67c0020 of 8 bytes by task 12003 on cpu 0:
    sctp_hash_obj+0x4f/0x2d0 net/sctp/input.c:894
    rht_key_get_hash include/linux/rhashtable.h:133 [inline]
    rht_key_hashfn include/linux/rhashtable.h:159 [inline]
    rht_head_hashfn include/linux/rhashtable.h:174 [inline]
    head_hashfn lib/rhashtable.c:41 [inline]
    rhashtable_rehash_one lib/rhashtable.c:245 [inline]
    rhashtable_rehash_chain lib/rhashtable.c:276 [inline]
    rhashtable_rehash_table lib/rhashtable.c:316 [inline]
    rht_deferred_worker+0x468/0xab0 lib/rhashtable.c:420
    process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
    worker_thread+0xa0/0x800 kernel/workqueue.c:2415
    kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
    ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

It was caused by rhashtable access asoc->base.sk when sctp_assoc_migrate
is changing its value. However, what rhashtable wants is netns from asoc
base.sk, and for an asoc, its netns won't change once set. So we can
simply fix it by caching netns since created.

Fixes: d6c0256a ("sctp: add the rhashtable apis for sctp global transport hashtable")
Reported-by: syzbot+e3b35fe7918ff0ee474e@syzkaller.appspotmail.com
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit fd567ac20cb0377ff466d3337e6e9ac5d0cb15e4 ]

In commit 4f07b80c9733 ("tipc: check msg->req data len in
tipc_nl_compat_bearer_disable") the same patch code was copied into
routines: tipc_nl_compat_bearer_disable(),
tipc_nl_compat_link_stat_dump() and tipc_nl_compat_link_reset_stats().
The two link routine occurrences should have been modified to check
the maximum link name length and not bearer name length.

Fixes: 4f07b80c9733 ("tipc: check msg->reg data len in tipc_nl_compat_bearer_disable")
Signed-off-by: NJohn Rutherford <john.rutherford@dektech.com.au>
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4b67c515036313f3c3ecba3cb2babb9cbddb3f85 ]

test_sockmap creates a temporary file to use for sendpage.
this may fail for various reasons. Handle the error rather
than segfault.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 8a574f86652a4540a2433946ba826ccb87f398cc ]

If we can't build the flow del notification, we can simply delete
the flow, no need to crash the kernel. Still keep a WARN_ON to
preserve debuggability.

Note: the BUG_ON() predates the Fixes tag, but this change
can be applied only after the mentioned commit.

v1 -> v2:
 - do not leak an skb on error

Fixes: aed06778 ("openvswitch: Minimize ovs_flow_cmd_del critical section.")
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 8ffeb03fbba3b599690b361467bfd2373e8c450f ]

All the callers of ovs_flow_cmd_build_info() already deal with
error return code correctly, so we can handle the error condition
in a more gracefull way. Still dump a warning to preserve
debuggability.

v1 -> v2:
 - clarify the commit message
 - clean the skb and report the error (DaveM)

Fixes: ccb1352e ("net: Add Open vSwitch kernel components.")
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e58c1912418980f57ba2060017583067f5f71e52 ]

Slip_open doesn't clean-up device which registration failed from the
slip_devs device list. On next open after failure this list is iterated
and freed device is accessed. Fix this by calling sl_free_netdev in error
path.

Here is the trace from the Syzbot:

__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
__kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:634
__asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132
sl_sync drivers/net/slip/slip.c:725 [inline]
slip_open+0xecd/0x11b7 drivers/net/slip/slip.c:801
tty_ldisc_open.isra.0+0xa3/0x110 drivers/tty/tty_ldisc.c:469
tty_set_ldisc+0x30e/0x6b0 drivers/tty/tty_ldisc.c:596
tiocsetd drivers/tty/tty_io.c:2334 [inline]
tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2594
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0xdb6/0x13e0 fs/ioctl.c:696
ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 3b5a39979daf ("slip: Fix memory leak in slip_open error path")
Reported-by: syzbot+4d5170758f3762109542@syzkaller.appspotmail.com
Cc: David Miller <davem@davemloft.net>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: NJouni Hogander <jouni.hogander@unikie.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b6631c6031c746ed004c4221ec0616d7a520f441 ]

In the implementation of sctp_sf_do_5_2_4_dupcook() the allocated
new_asoc is leaked if security_sctp_assoc_request() fails. Release it
via sctp_association_free().

Fixes: 2277c7cd ("sctp: Add LSM hooks")
Signed-off-by: NNavid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4e81c0b3fa93d07653e2415fa71656b080a112fd ]

When user-space sets the OVS_UFID_F_OMIT_* flags, and the relevant
flow has no UFID, we can exceed the computed size, as
ovs_nla_put_identifier() will always dump an OVS_FLOW_ATTR_KEY
attribute.
Take the above in account when computing the flow command message
size.

Fixes: 74ed7ab9 ("openvswitch: Add support for unique flow IDs.")
Reported-by: NQi Jun Ding <qding@redhat.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 7eb9d7675c08937cd11d32b0b40442d4d731c5ee ]

We need to calculate the skb size correctly otherwise we risk triggering
skb_over_panic[1]. The issue is that data_len is added to the skb in a
nl attribute, but we don't account for its header size (nlattr 4 bytes)
and alignment. We account for it when calculating the total size in
the > PSAMPLE_MAX_PACKET_SIZE comparison correctly, but not when
allocating after that. The fix is simple - use nla_total_size() for
data_len when allocating.

To reproduce:
 $ tc qdisc add dev eth1 clsact
 $ tc filter add dev eth1 egress matchall action sample rate 1 group 1 trunc 129
 $ mausezahn eth1 -b bcast -a rand -c 1 -p 129
 < skb_over_panic BUG(), tail is 4 bytes past skb->end >

[1] Trace:
 [   50.459526][ T3480] skbuff: skb_over_panic: text:(____ptrval____) len:196 put:136 head:(____ptrval____) data:(____ptrval____) tail:0xc4 end:0xc0 dev:<NULL>
 [   50.474339][ T3480] ------------[ cut here ]------------
 [   50.481132][ T3480] kernel BUG at net/core/skbuff.c:108!
 [   50.486059][ T3480] invalid opcode: 0000 [#1] PREEMPT SMP
 [   50.489463][ T3480] CPU: 3 PID: 3480 Comm: mausezahn Not tainted 5.4.0-rc7 #108
 [   50.492844][ T3480] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
 [   50.496551][ T3480] RIP: 0010:skb_panic+0x79/0x7b
 [   50.498261][ T3480] Code: bc 00 00 00 41 57 4c 89 e6 48 c7 c7 90 29 9a 83 4c 8b 8b c0 00 00 00 50 8b 83 b8 00 00 00 50 ff b3 c8 00 00 00 e8 ae ef c0 fe <0f> 0b e8 2f df c8 fe 48 8b 55 08 44 89 f6 4c 89 e7 48 c7 c1 a0 22
 [   50.504111][ T3480] RSP: 0018:ffffc90000447a10 EFLAGS: 00010282
 [   50.505835][ T3480] RAX: 0000000000000087 RBX: ffff888039317d00 RCX: 0000000000000000
 [   50.507900][ T3480] RDX: 0000000000000000 RSI: ffffffff812716e1 RDI: 00000000ffffffff
 [   50.509820][ T3480] RBP: ffffc90000447a60 R08: 0000000000000001 R09: 0000000000000000
 [   50.511735][ T3480] R10: ffffffff81d4f940 R11: 0000000000000000 R12: ffffffff834a22b0
 [   50.513494][ T3480] R13: ffffffff82c10433 R14: 0000000000000088 R15: ffffffff838a8084
 [   50.515222][ T3480] FS:  00007f3536462700(0000) GS:ffff88803eac0000(0000) knlGS:0000000000000000
 [   50.517135][ T3480] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [   50.518583][ T3480] CR2: 0000000000442008 CR3: 000000003b222000 CR4: 00000000000006e0
 [   50.520723][ T3480] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 [   50.522709][ T3480] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 [   50.524450][ T3480] Call Trace:
 [   50.525214][ T3480]  skb_put.cold+0x1b/0x1b
 [   50.526171][ T3480]  psample_sample_packet+0x1d3/0x340
 [   50.527307][ T3480]  tcf_sample_act+0x178/0x250
 [   50.528339][ T3480]  tcf_action_exec+0xb1/0x190
 [   50.529354][ T3480]  mall_classify+0x67/0x90
 [   50.530332][ T3480]  tcf_classify+0x72/0x160
 [   50.531286][ T3480]  __dev_queue_xmit+0x3db/0xd50
 [   50.532327][ T3480]  dev_queue_xmit+0x18/0x20
 [   50.533299][ T3480]  packet_sendmsg+0xee7/0x2090
 [   50.534331][ T3480]  sock_sendmsg+0x54/0x70
 [   50.535271][ T3480]  __sys_sendto+0x148/0x1f0
 [   50.536252][ T3480]  ? tomoyo_file_ioctl+0x23/0x30
 [   50.537334][ T3480]  ? ksys_ioctl+0x5e/0xb0
 [   50.540068][ T3480]  __x64_sys_sendto+0x2a/0x30
 [   50.542810][ T3480]  do_syscall_64+0x73/0x1f0
 [   50.545383][ T3480]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 [   50.548477][ T3480] RIP: 0033:0x7f35357d6fb3
 [   50.551020][ T3480] Code: 48 8b 0d 18 90 20 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d f9 d3 20 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 eb f6 ff ff 48 89 04 24
 [   50.558547][ T3480] RSP: 002b:00007ffe0c7212c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
 [   50.561870][ T3480] RAX: ffffffffffffffda RBX: 0000000001dac010 RCX: 00007f35357d6fb3
 [   50.565142][ T3480] RDX: 0000000000000082 RSI: 0000000001dac2a2 RDI: 0000000000000003
 [   50.568469][ T3480] RBP: 00007ffe0c7212f0 R08: 00007ffe0c7212d0 R09: 0000000000000014
 [   50.571731][ T3480] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000082
 [   50.574961][ T3480] R13: 0000000001dac2a2 R14: 0000000000000001 R15: 0000000000000003
 [   50.578170][ T3480] Modules linked in: sch_ingress virtio_net
 [   50.580976][ T3480] ---[ end trace 61a515626a595af6 ]---

CC: Yotam Gigi <yotamg@mellanox.com>
CC: Jiri Pirko <jiri@mellanox.com>
CC: Jamal Hadi Salim <jhs@mojatatu.com>
CC: Simon Horman <simon.horman@netronome.com>
CC: Roopa Prabhu <roopa@cumulusnetworks.com>
Fixes: 6ae0a628 ("net: Introduce psample, a new genetlink channel for packet sampling")
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 1d7ea55668878bb350979c377fc72509dd6f5b21 ]

While enqueueing a broadcast skb to port->bc_queue, schedule_work()
is called to add port->bc_work, which processes the skbs in
bc_queue, to "events" work queue. If port->bc_queue is full, the
skb will be discarded and schedule_work(&port->bc_work) won't be
called. However, if port->bc_queue is full and port->bc_work is not
running or pending, port->bc_queue will keep full and schedule_work()
won't be called any more, and all broadcast skbs to macvlan will be
discarded. This case can happen:

macvlan_process_broadcast() is the pending function of port->bc_work,
it moves all the skbs in port->bc_queue to the queue "list", and
processes the skbs in "list". During this, new skbs will keep being
added to port->bc_queue in macvlan_broadcast_enqueue(), and
port->bc_queue may already full when macvlan_process_broadcast()
return. This may happen, especially when there are a lot of real-time
threads and the process is preempted.

Fix this by calling schedule_work(&port->bc_work) even if
port->bc_work is full in macvlan_broadcast_enqueue().

Fixes: 412ca155 ("macvlan: Move broadcasts into a work queue")
Signed-off-by: NMenglong Dong <dong.menglong@zte.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 79199002db5c571e335131856b3ff057ffd9f3c0 upstream.

In case the completion function failes, unbind will be called
which will call cancel_work for awb_work.
This will trigger a WARN message from the workqueue.
To avoid this, move the INIT_WORK call at the start of the completion
function. This way the work is always initialized, which corresponds
to the 'always canceled' unbind code.

Fixes: 93d4a26c ("[media] atmel-isc: add the isc pipeline function")
Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1e4e25c4959c10728fbfcc6a286f9503d32dfe02 upstream.

The subsystem will free the asd memory on notifier cleanup, if the asd is
added to the notifier.
However the memory is freed using kfree.
Thus, we cannot allocate the asd using devm_*
This can lead to crashes and problems.
To test this issue, just return an error at probe, but cleanup the
notifier beforehand.

Fixes: 10626744 ("[media] atmel-isc: add the Image Sensor Controller code")
Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e926b12c611c2095c7976e2ed31753ad6eb5ff1a upstream.

After a PWM is disposed by its user the per chip data becomes invalid.
Clear the data in common code instead of the device drivers to get
consistent behaviour. Before this patch only three of nine drivers
cleaned up here.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NThierry Reding <thierry.reding@gmail.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f413cbb332a0b5251a790f396d0eb4ebcade5dec upstream.

Errors are negative numbers. Using %u shows them as very large positive
numbers such as 4294967277 that don't make sense. Use the %d format
instead, and get a much nicer -19.
Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net>
Fixes: b48e0bab ("net: macb: Migrate to devm clock interface")
Fixes: 93b31f48 ("net/macb: unify clock management")
Fixes: 421d9df0 ("net/macb: merge at91_ether driver into macb driver")
Fixes: aead88bd ("net: ethernet: macb: Add support for rx_clk")
Fixes: f5473d1d44e4 ("net: macb: Support clock management for tsu_clk")
Acked-by: NNicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a0816e5088baab82aa738d61a55513114a673c8e upstream.

Control DO_WHITE_BALANCE is a button, with read only and execute-on-write flags.
Adding this control in the proper list in the fill function.

After adding it here, we can see output of v4l2-ctl -L
do_white_balance 0x0098090d (button) : flags=write-only, execute-on-write
Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 86c6739eda7d2a03f2db30cbee67a5fb81afa8ba upstream.

We leak the page that we use to create skb page fragments
when destroying the xfrm_state. Fix this by dropping a
page reference if a page was assigned to the xfrm_state.

Fixes: cac2661c ("esp4: Avoid skb_cow_data whenever possible")
Reported-by: NJD <jdtxs00@gmail.com>
Reported-by: NPaul Wouters <paul@nohats.ca>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7a7ebfa85f4fac349f3ab219538c44efe18b0cf6 upstream.

On zang's Dell XPS 13 9370 after Thunderbolt NVM firmware upgrade the
Thunderbolt controller did not come back as expected. Only after the
system was rebooted it became available again. It is not entirely clear
what happened but I suspect the new NVM firmware image authentication
failed for some reason. Regardless of this the router needs to be power
cycled if NVM authentication fails in order to get it fully functional
again.

This modifies the driver to issue a power cycle in case the NVM
authentication fails immediately when dma_port_flash_update_auth()
returns. We also need to call tb_switch_set_uuid() earlier to be able to
fetch possible NVM authentication failure when DMA port is added.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=205457Reported-by: Nzang <dump@tzib.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 82b29b9f72afdccb40ea5f3c13c6a3cb65a597bc upstream.

Comet Point (Comet Lake) V device id.

Cc: <stable@vger.kernel.org>
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191105150514.14010-2-tomas.winkler@intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>