If we use __attribute__((packed)), GCC will _also_ assume that the
structures aren't sensibly aligned, and it'll emit code to cope with
that instead of straight word load/save. This can be _very_ suboptimal
on architectures like ARM.

Ideally, we want an attribute which just tells GCC not to do any
padding, without the alignment side-effects. In the absense of that,
we'll just drop the 'packed' attribute and hope that everything stays as
it was (which to be fair is fairly much what we expect). And add some
paranoia checks in the initialisation code, which should be optimised
away completely in the normal case.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Make it work even with compilers which lack the wit to notice that
THIS_MODULE is always non-NULL. Use #ifdef MODULE instead. It's only
a temporary debugging check anyway.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

... and also fix the multiple inclusion guard so it actually _works_
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

The physmap platform driver conversion added to physmap.c an include
of asm/mach/flash.h which is 1) ARM-specific; and 2) isn't actually
necessary.  Remove it.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

We currently get fairly poor behaviour with files which get many short
writes, such as system logs. This is because we end up with many tiny
data nodes, and the rbtree gets massive. None of these nodes are
actually obsolete, so they are counted as 'clean' space. Eraseblocks can
be entirely full of these nodes (which are REF_NORMAL instead of
REF_PRISTINE), and still they count entirely towards 'used_size' and the
eraseblocks can sit on the clean_list for a long time without being
picked for GC.

One way to alleviate this in the long term is to account REF_NORMAL
space separately from REF_PRISTINE space, rather than counting them both
towards used_size. Then these eraseblocks can be picked for GC and the
offending nodes will be garbage collected.

The short-term fix, though -- which probably makes sense even if we do
eventually implement the above -- is to merge these nodes as they're
written. When we write the last byte in a page, write the _whole_ page.
This obsoletes the earlier nodes in the page _immediately_ and we don't
even need to wait for the garbage collection to do it.

Original implementation from Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

We used to calculate the number of chips to be zero, allocate an array
of that size, then nasty things would happen when we attempt to access
the first object in that zero-sized array.

Now, if the number of _full_ chips that would fit into the map is zero,
we allocate an array of one anyway, and then artificially reduce the
total size of the resulting MTD device to fit in the map.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

There's a mem leak in drivers/mtd/devices/block2mtd.c::block2mtd_setup()

We can leak 'name' allocated with kmalloc in 'parse_name' if leave via
the 'parse_err' macro since it contains a return but doesn't do any
freeing.

Spotted by coverity checker as bug 615.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

The _board_ driver needs to be mtd->owner, and it in turn pins the
nand.ko module. Fix them all to actually do that, and fix nand.ko not to
overwrite it -- and also to check that the caller sets it, if the caller
is a module.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

There are two code paths in drivers/mtd/devices/phram.c::phram_setup() that
will leak memory.
Memory is allocated to the variable 'name' with kmalloc() by the
parse_name() function, but if we leave by way of the parse_err() macro,
then that memory is never kfree()'d, nor is it ever used with
register_device() so it won't be freed later either - leak.

Found by the Coverity checker as #593 - simple fix below.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

It was just too painful to deal with.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

We were scanning for 0xFF through the entire chip -- which takes a while
when it's a 512MiB device as I have on my current toy. The specs only say
we need to check certain bytes -- so do only that.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

- Implement HW ECC support,
- Provide read_buf() and write_buf() routines using memcpy
- Use on-flash bad block table
- Fix module refcounting
- Avoid read/modify/write in hwcontrol()
- Minor cosmetic fixes

Partly based on code and ideas from Tom Sylla <tom.sylla@amd.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

These new chips have 128KiB blocks. Don't try to kmalloc that.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NEgry Gábor <gaboregry@t-online.hu>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

We need to check block cmd only instead with comparing with cmd
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

One Block of the NAND Flash Array memory is reserved as
a One-Time Programmable Block memory area.
Also, 1st Block of NAND Flash Array can be used as OTP.

The OTP block can be read, programmed and locked using the same
operations as any other NAND Flash Array memory block.
OTP block cannot be erased.

OTP block is fully-guaranteed to be a valid block.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

There's erase bug in DDP.
We need to add DDP select in erase
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

There's some problem with write oob in serveral platform.
So we write oob with oobsize aligned (16bytes) instead of 3 bytes (from {2,
3})
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Signed-off-by: NJarkko Lavinen <jarkko.lavinen@nokia.com>

Some free byte positions at onenand_oob_64 were wrong. This was also
reported by Christian Lehne. 3 byte slots are at 2+16*i and 2 byte
slots at 14+16*i.
Signed-off-by: NJarkko Lavinen <jarkko.lavinen@nokia.com>

Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Reduce the nr.  of pointer dereferences in fs/jffs2/summary.c

Benefits:
 - micro speed optimization due to fewer pointer derefs
 - generated code is slightly smaller
 - better readability

(The first two sound like a compiler problem but I'll go with the third. dwmw2).
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Default values for boolean and tristate options can only be 'y', 'm' or 'n'.
This patch removes wrong default for MTD_PCMCIA_ANONYMOUS.
Signed-off-by: NJean-Luc Leger <jean-luc.leger@dspnet.fr.eu.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

This file hasn't actually been used since the very early days of JFFS2
when Arjan was playing with compression methods. It can go now.
Signed-off-by: NDomen Puncer <domen@coderock.org>
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NArjan van de Ven <arjan@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Oops. Stupid StudlyCaps. Again.

This driver is doubly-deprecated because is was subsumed into doc2000.c
and _also_ we want people to start using the new NAND wrapper for these
devices anyway. But ISTR there was still one person using it because
something didn't work for them. Must chase that up and then I can kill
this.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

This lacks hardware ECC support and a few optimisations we're going to
want fairly soon, but it works well enough to mount and use JFFS2.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Stupid StudlyCaps. Who did that?
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

This was already a bad plan when I argued against adding it in the first
place. Good riddance.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Finally putting it back how it was before Keith got at it -- yay :)
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver.  I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.

In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0.  Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.

This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed.  (This should hold as long as users don't touch 'physmap_map'
directly.)

Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go.  (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

It seems like there is a potential race in the function jffs2_do_setattr()
in the case when attributes of a symlink are updated. The symlink metadata
is read without having f->sem locked.

The following patch should fix the race.
Signed-off-by: NDmitry Bazhenov <atrey@emcraft.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

fix infinite loop in the SCTP-netfilter code: check SCTP chunk size to
guarantee progress of for_each_sctp_chunk(). (all other uses of
for_each_sctp_chunk() are preceded by do_basic_checks(), so this fix
should be complete.)

Based on patch from Ingo Molnar <mingo@elte.hu>

CVE-2006-1527
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes the issues with multiple irqs.

I am resending based on feedback. I decoupled the dma mask for
consistent memory and fixed leak with multiple irq in error path.

Thanks to Manfred for catching the spin lock problem.
Signed-Off-By: NAyaz Abdulla <aabdulla@nvidia.com>