- 19 3月, 2009 25 次提交
-
-
由 J. Bruce Fields 提交于
Make this check self-documenting. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
I can't recall ever seeing these printk's used to debug a problem. I'll happily put them back if we see a case where they'd be useful. (Though if we do that the find_XXX() errors would probably be better reported in find_XXX() functions themselves.) Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
We no longer need stidp. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
Note that we exit this first big "if" with stp == NULL if and only if we took the first branch; therefore, the second "if" is redundant, and we can just combine the two, simplifying the logic. Reviewed-by: NYang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
No change in behavior. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
Remove a couple redundant comments, adjust style; no change in behavior. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Harvey Harrison 提交于
The base versions handle constant folding now, none of these headers are exported to userspace, so the __ prefixed versions are not necessary. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Reviewed-by: NNeilBrown <neilb@suse.de> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 wengang wang 提交于
sometimes HPUX nfs client sends a create request to linux nfs server(v2/v3). the dump of the request is like: obj_attributes mode: value follows set_it: value follows (1) mode: 00 uid: no value set_it: no value (0) gid: value follows set_it: value follows (1) gid: 8030 size: value follows set_it: value follows (1) size: 0 atime: don't change set_it: don't change (0) mtime: don't change set_it: don't change (0) note that mode is 00(havs no rwx privilege even for the owner) and it requires to set size to 0. as current nfsd(v2/v3) implementation, the server does mainly 2 steps: 1) creates the file in mode specified by calling vfs_create(). 2) sets attributes for the file by calling nfsd_setattr(). at step 2), it finally calls file system specific setattr() function which may fail when checking permission because changing size needs WRITE privilege but it has none since mode is 000. for this case, a new file created, we may simply ignore the request of setting size to 0, so that WRITE privilege is not needed and the open succeeds. Signed-off-by: NWengang Wang <wen.gang.wang@oracle.com> -- vfs.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Miklos Szeredi 提交于
No change in behavior, just rearranging the switch so that we break out of the switch if and only if we're in the wait case. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Alexandros Batsakis 提交于
not having the state locked before putting the client/delegation causes a bug. Also removed the comment from the function header about the state being already locked Signed-off-by: NAlexandros Batsakis <batsakis@netapp.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
The use of |= is confusing--the bitmask is always initialized to zero in this case, so we're effectively just doing an assignment here. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Manish Katiyar 提交于
Enable NFSD only when FILE_LOCKING is enabled, since we don't want to support NFSD without FILE_LOCKING. Signed-off-by: NManish Katiyar <mkatiyar@gmail.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Qinghuang Feng 提交于
MSDOS_SUPER_MAGIC is defined in <linux/magic.h>, so use MSDOS_SUPER_MAGIC directly. Signed-off-by: NQinghuang Feng <qhfeng.kernel@gmail.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
The caller always knows specifically whether it's releasing a lockowner or an openowner, and the code is simpler if we use separate functions (and the apparent recursion is gone). Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
The flags here attempt to make the code more general, but I find it actually just adds confusion. I think it's clearer to separate the logic for the open and lock cases entirely. And eventually we may want to separate the stateowner and stateid types as well, as many of the fields aren't shared between the lock and open cases. Also move to eliminate forward references. Start with the stateid's. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Reviewed-by: NBenny Halevy <bhalevy@panasas.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: benet: remove driver now that it is merged in drivers/net/
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
* 'for-2.6.29' of git://linux-nfs.org/~bfields/linux: nfsd: nfsd should drop CAP_MKNOD for non-root NFSD: provide encode routine for OP_OPENATTR
-
由 Greg Kroah-Hartman 提交于
The benet driver is now in the proper place in drivers/net/benet, so we can remove the staging version. Acked-by: NSathya Perla <sathyap@serverengines.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/ps3: ps3_defconfig updates powerpc/mm: Respect _PAGE_COHERENT on classic ppc32 SW powerpc/5200: Enable CPU_FTR_NEED_COHERENT for MPC52xx ps3/block: Replace mtd/ps3vram by block/ps3vram
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: module: fix refptr allocation and release order
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: storage: Unusual USB device Prolific 2507 variation added USB: Add device id for Option GTM380 to option driver USB: Add Vendor/Product ID for new CDMA U727 to option driver USB: Updated unusual-devs entry for USB mass storage on Nokia 6233 USB: Option: let cdc-acm handle Sony Ericsson F3507g / Dell 5530 USB: EHCI: expedite unlinks when the root hub is suspended USB: EHCI: Fix isochronous URB leak USB: option.c: add ZTE 622 modem device USB: wusbcore/wa-xfer, fix lock imbalance USB: misc/vstusb, fix lock imbalance USB: misc/adutux, fix lock imbalance USB: image/mdc800, fix lock imbalance USB: atm/cxacru, fix lock imbalance USB: unusual_devs: Add support for GI 0431 SD-Card interface USB: serial: new cp2101 device id USB: serial: ftdi: enable UART detection on gnICE JTAG adaptors blacklist interface0 USB: serial: add FTDI USB/Serial converter devices USB: usbfs: keep async URBs until the device file is closed USB: usbtmc: add protocol 1 support USB: usbtmc: fix stupid bug in open()
-
- 18 3月, 2009 15 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: Fix vunmap and free order in snd_free_sgbuf_pages() ALSA: mixart, fix lock imbalance ALSA: pcm_oss, fix locking typo ALSA: oss-mixer - Fixes recording gain control ALSA: hda - Workaround for buggy DMA position on ATI controllers ALSA: hda - Fix DMA mask for ATI controllers ALSA: opl3sa2 - Fix NULL dereference when suspending snd_opl3sa2
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
In snd_free_sgbuf_pags(), vunmap() is called after releasing the SG pages, and it causes errors on Xen as Xen manages the pages differently. Although no significant errors have been reported on the actual hardware, this order should be fixed other way round, first vunmap() then free pages. Cc: Jan Beulich <jbeulich@novell.com> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jiri Slaby 提交于
There is an omitted unlock in one snd_mixart_hw_params fail path. Fix it. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jiri Slaby 提交于
s/mutex_lock/mutex_unlock/ on 2 fail paths in snd_pcm_oss_proc_write. Probably a typo, lock should be unlocked when leaving the function. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Viral Mehta 提交于
At the time of initialization, SNDRV_MIXER_OSS_PRESENT_PVOLUME bit is not set for MIC (slot 7). So, the same should not be checked when an application tries to do gain control for audio recording devices. Just check slot->present for SNDRV_MIXER_OSS_PRESENT_CVOLUME independently. Verified with a simple application which opens /dev/dsp for recording and /dev/mixer for volume control. Have tested two usb audio mic devices. Signed-off-by: NViral Mehta <viral.mehta@einfochips.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The position-buffer on ATI controllers are unreliable as well as on VIA chips, thus the same workaround for DMA position reading as VIA is useful for ATI. Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
ATI controllers (at least some SB0600 models) appear buggy to handle 64bit DMA. As a workaround, reset GCAP bit0 and let the driver to use only 32bit DMA on these controllers. Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix bb_prealloc_list corruption due to wrong group locking ext4: fix bogus BUG_ONs in in mballoc code ext4: Print the find_group_flex() warning only once ext4: fix header check in ext4_ext_search_right() for deep extent trees.
-
由 Geoff Levand 提交于
Update ps3_defconfig. Sets these options: CONFIG_PS3_VRAM=m CONFIG_BLK_DEV_DM=m CONFIG_USB_HIDDEV=y CONFIG_EXT4_FS=y Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
-
由 Masami Hiramatsu 提交于
Impact: fix ref-after-free crash on failed module load Fix refptr bug: Change refptr allocation and release order not to access a module data structure pointed by 'mod' after freeing mod->module_core. This bug will cause kernel panic(e.g. failed to find undefined symbols). This bug was reported on systemtap bugzilla. http://sources.redhat.com/bugzilla/show_bug.cgi?id=9927Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com> Cc: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Thomas Bartosik 提交于
The "c-enter" USB to Toshiba 1.8" IDE enclosure needs special treatment to work flawlessly. This patch is absolutely trivial, as the integrated USB-IDE bridge is already identified to be an "unusual" device, only the bcdDevice is different (lower) to the bcdDeviceMin already included in the kernel. It is a Prolific 2507 bridge. T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=067b ProdID=2507 Rev= 0.01 S: Manufacturer=Prolific Technology Inc. S: Product=ATAPI-6 Bridge Controller S: SerialNumber=00000272 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: NThomas Bartosik <tbartdev@gmx-topmail.de> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Achilleas Kotsis 提交于
Option GTM380 in Modem mode uses Product ID 0x7201. This has been tested and works on production systems for over 6 months. Signed-off-by: NAchilleas Kotsis <akots@exponent.gr> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-