Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 161
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 28 7月, 2019 16 次提交
    • H
      r8169: fix issue with confused RX unit after PHY power-down on RTL8411b · 3e4e6b71
      由 Heiner Kallweit 提交于 
      [ Upstream commit fe4e8db0392a6c2e795eb89ef5fcd86522e66248 ]

On RTL8411b the RX unit gets confused if the PHY is powered-down.
This was reported in [0] and confirmed by Realtek. Realtek provided
a sequence to fix the RX unit after PHY wakeup.

The issue itself seems to have been there longer, the Fixes tag
refers to where the fix applies properly.

[0] https://bugzilla.redhat.com/show_bug.cgi?id=1692075

Fixes: a99790bf ("r8169: Reinstate ASPM Support")
Tested-by: NIonut Radu <ionut.radu@gmail.com>
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3e4e6b71
    • AlbinYang's avatar
      nfc: fix potential illegal memory access · 97739e5c
      由 AlbinYang 提交于 
      [ Upstream commit dd006fc434e107ef90f7de0db9907cbc1c521645 ]

The frags_q is not properly initialized, it may result in illegal memory
access when conn_info is NULL.
The "goto free_exit" should be replaced by "goto exit".
Signed-off-by: AlbinYang's avatarYang Wei <albin_yang@163.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      97739e5c
    • J
      net: stmmac: Re-work the queue selection for TSO packets · f47f68cc
      由 Jose Abreu 提交于 
      [ Upstream commit 4993e5b37e8bcb55ac90f76eb6d2432647273747 ]

Ben Hutchings says:
	"This is the wrong place to change the queue mapping.
	stmmac_xmit() is called with a specific TX queue locked,
	and accessing a different TX queue results in a data race
	for all of that queue's state.

	I think this commit should be reverted upstream and in all
	stable branches.  Instead, the driver should implement the
	ndo_select_queue operation and override the queue mapping there."

Fixes: c5acdbee22a1 ("net: stmmac: Send TSO packets always from Queue 0")
Suggested-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f47f68cc
    • A
      net: phy: sfp: hwmon: Fix scaling of RX power · 201d7d62
      由 Andrew Lunn 提交于 
      [ Upstream commit 0cea0e1148fe134a4a3aaf0b1496f09241fb943a ]

The RX power read from the SFP uses units of 0.1uW. This must be
scaled to units of uW for HWMON. This requires a divide by 10, not the
current 100.

With this change in place, sensors(1) and ethtool -m agree:

sff2-isa-0000
Adapter: ISA adapter
in0:          +3.23 V
temp1:        +33.1 C
power1:      270.00 uW
power2:      200.00 uW
curr1:        +0.01 A

        Laser output power                        : 0.2743 mW / -5.62 dBm
        Receiver signal average optical power     : 0.2014 mW / -6.96 dBm

Reported-by: chris.healy@zii.aero
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Fixes: 1323061a ("net: phy: sfp: Add HWMON support for module sensors")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      201d7d62
    • J
      net: openvswitch: fix csum updates for MPLS actions · c60bce64
      由 John Hurley 提交于 
      [ Upstream commit 0e3183cd2a64843a95b62f8bd4a83605a4cf0615 ]

Skbs may have their checksum value populated by HW. If this is a checksum
calculated over the entire packet then the CHECKSUM_COMPLETE field is
marked. Changes to the data pointer on the skb throughout the network
stack still try to maintain this complete csum value if it is required
through functions such as skb_postpush_rcsum.

The MPLS actions in Open vSwitch modify a CHECKSUM_COMPLETE value when
changes are made to packet data without a push or a pull. This occurs when
the ethertype of the MAC header is changed or when MPLS lse fields are
modified.

The modification is carried out using the csum_partial function to get the
csum of a buffer and add it into the larger checksum. The buffer is an
inversion of the data to be removed followed by the new data. Because the
csum is calculated over 16 bits and these values align with 16 bits, the
effect is the removal of the old value from the CHECKSUM_COMPLETE and
addition of the new value.

However, the csum fed into the function and the outcome of the
calculation are also inverted. This would only make sense if it was the
new value rather than the old that was inverted in the input buffer.

Fix the issue by removing the bit inverts in the csum_partial calculation.

The bug was verified and the fix tested by comparing the folded value of
the updated CHECKSUM_COMPLETE value with the folded value of a full
software checksum calculation (reset skb->csum to 0 and run
skb_checksum_complete(skb)). Prior to the fix the outcomes differed but
after they produce the same result.

Fixes: 25cd9ba0 ("openvswitch: Add basic MPLS support to kernel")
Fixes: bc7cc599 ("openvswitch: update checksum in {push,pop}_mpls")
Signed-off-by: NJohn Hurley <john.hurley@netronome.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Acked-by: NPravin B Shelar <pshelar@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c60bce64
    • L
      net: neigh: fix multiple neigh timer scheduling · 257441a0
      由 Lorenzo Bianconi 提交于 
      [ Upstream commit 071c37983d99da07797294ea78e9da1a6e287144 ]

Neigh timer can be scheduled multiple times from userspace adding
multiple neigh entries and forcing the neigh timer scheduling passing
NTF_USE in the netlink requests.
This will result in a refcount leak and in the following dump stack:

[   32.465295] NEIGH: BUG, double timer add, state is 8
[   32.465308] CPU: 0 PID: 416 Comm: double_timer_ad Not tainted 5.2.0+ #65
[   32.465311] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-2.fc30 04/01/2014
[   32.465313] Call Trace:
[   32.465318]  dump_stack+0x7c/0xc0
[   32.465323]  __neigh_event_send+0x20c/0x880
[   32.465326]  ? ___neigh_create+0x846/0xfb0
[   32.465329]  ? neigh_lookup+0x2a9/0x410
[   32.465332]  ? neightbl_fill_info.constprop.0+0x800/0x800
[   32.465334]  neigh_add+0x4f8/0x5e0
[   32.465337]  ? neigh_xmit+0x620/0x620
[   32.465341]  ? find_held_lock+0x85/0xa0
[   32.465345]  rtnetlink_rcv_msg+0x204/0x570
[   32.465348]  ? rtnl_dellink+0x450/0x450
[   32.465351]  ? mark_held_locks+0x90/0x90
[   32.465354]  ? match_held_lock+0x1b/0x230
[   32.465357]  netlink_rcv_skb+0xc4/0x1d0
[   32.465360]  ? rtnl_dellink+0x450/0x450
[   32.465363]  ? netlink_ack+0x420/0x420
[   32.465366]  ? netlink_deliver_tap+0x115/0x560
[   32.465369]  ? __alloc_skb+0xc9/0x2f0
[   32.465372]  netlink_unicast+0x270/0x330
[   32.465375]  ? netlink_attachskb+0x2f0/0x2f0
[   32.465378]  netlink_sendmsg+0x34f/0x5a0
[   32.465381]  ? netlink_unicast+0x330/0x330
[   32.465385]  ? move_addr_to_kernel.part.0+0x20/0x20
[   32.465388]  ? netlink_unicast+0x330/0x330
[   32.465391]  sock_sendmsg+0x91/0xa0
[   32.465394]  ___sys_sendmsg+0x407/0x480
[   32.465397]  ? copy_msghdr_from_user+0x200/0x200
[   32.465401]  ? _raw_spin_unlock_irqrestore+0x37/0x40
[   32.465404]  ? lockdep_hardirqs_on+0x17d/0x250
[   32.465407]  ? __wake_up_common_lock+0xcb/0x110
[   32.465410]  ? __wake_up_common+0x230/0x230
[   32.465413]  ? netlink_bind+0x3e1/0x490
[   32.465416]  ? netlink_setsockopt+0x540/0x540
[   32.465420]  ? __fget_light+0x9c/0xf0
[   32.465423]  ? sockfd_lookup_light+0x8c/0xb0
[   32.465426]  __sys_sendmsg+0xa5/0x110
[   32.465429]  ? __ia32_sys_shutdown+0x30/0x30
[   32.465432]  ? __fd_install+0xe1/0x2c0
[   32.465435]  ? lockdep_hardirqs_off+0xb5/0x100
[   32.465438]  ? mark_held_locks+0x24/0x90
[   32.465441]  ? do_syscall_64+0xf/0x270
[   32.465444]  do_syscall_64+0x63/0x270
[   32.465448]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix the issue unscheduling neigh_timer if selected entry is in 'IN_TIMER'
receiving a netlink request with NTF_USE flag set
Reported-by: NMarek Majkowski <marek@cloudflare.com>
Fixes: 0c5c2d30 ("neigh: Allow for user space users of the neighbour table")
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      257441a0
    • F
      net: make skb_dst_force return true when dst is refcounted · 832d0ea7
      由 Florian Westphal 提交于 
      [ Upstream commit b60a77386b1d4868f72f6353d35dabe5fbe981f2 ]

netfilter did not expect that skb_dst_force() can cause skb to lose its
dst entry.

I got a bug report with a skb->dst NULL dereference in netfilter
output path.  The backtrace contains nf_reinject(), so the dst might have
been cleared when skb got queued to userspace.

Other users were fixed via
if (skb_dst(skb)) {
	skb_dst_force(skb);
	if (!skb_dst(skb))
		goto handle_err;
}

But I think its preferable to make the 'dst might be cleared' part
of the function explicit.

In netfilter case, skb with a null dst is expected when queueing in
prerouting hook, so drop skb for the other hooks.

v2:
 v1 of this patch returned true in case skb had no dst entry.
 Eric said:
   Say if we have two skb_dst_force() calls for some reason
   on the same skb, only the first one will return false.

 This now returns false even when skb had no dst, as per Erics
 suggestion, so callers might need to check skb_dst() first before
 skb_dst_force().
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      832d0ea7
    • B
      net: dsa: mv88e6xxx: wait after reset deactivation · 6ab30a4c
      由 Baruch Siach 提交于 
      [ Upstream commit 7b75e49de424ceb53d13e60f35d0a73765626fda ]

Add a 1ms delay after reset deactivation. Otherwise the chip returns
bogus ID value. This is observed with 88E6390 (Peridot) chip.
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      6ab30a4c
    • J
      net: bcmgenet: use promisc for unsupported filters · 5832ef4a
      由 Justin Chen 提交于 
      [ Upstream commit 35cbef9863640f06107144687bd13151bc2e8ce3 ]

Currently we silently ignore filters if we cannot meet the filter
requirements. This will lead to the MAC dropping packets that are
expected to pass. A better solution would be to set the NIC to promisc
mode when the required filters cannot be met.

Also correct the number of MDF filters supported. It should be 17,
not 16.
Signed-off-by: NJustin Chen <justinpopo6@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5832ef4a
    • I
      ipv6: Unlink sibling route in case of failure · c0f4a644
      由 Ido Schimmel 提交于 
      [ Upstream commit 54851aa90cf27041d64b12f65ac72e9f97bd90fd ]

When a route needs to be appended to an existing multipath route,
fib6_add_rt2node() first appends it to the siblings list and increments
the number of sibling routes on each sibling.

Later, the function notifies the route via call_fib6_entry_notifiers().
In case the notification is vetoed, the route is not unlinked from the
siblings list, which can result in a use-after-free.

Fix this by unlinking the route from the siblings list before returning
an error.

Audited the rest of the call sites from which the FIB notification chain
is called and could not find more problems.

Fixes: 2233000c ("net/ipv6: Move call_fib6_entry_notifiers up for route adds")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reported-by: NAlexander Petrovskiy <alexpe@mellanox.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c0f4a644
    • D
      ipv6: rt6_check should return NULL if 'from' is NULL · 0bd84505
      由 David Ahern 提交于 
      [ Upstream commit 49d05fe2c9d1b4a27761c9807fec39b8155bef9e ]

Paul reported that l2tp sessions were broken after the commit referenced
in the Fixes tag. Prior to this commit rt6_check returned NULL if the
rt6_info 'from' was NULL - ie., the dst_entry was disconnected from a FIB
entry. Restore that behavior.

Fixes: 93531c67 ("net/ipv6: separate handling of FIB entries from dst based routes")
Reported-by: NPaul Donohue <linux-kernel@PaulSD.com>
Tested-by: NPaul Donohue <linux-kernel@PaulSD.com>
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0bd84505
    • M
      ipv4: don't set IPv6 only flags to IPv4 addresses · 47ce4427
      由 Matteo Croce 提交于 
      [ Upstream commit 2e60546368165c2449564d71f6005dda9205b5fb ]

Avoid the situation where an IPV6 only flag is applied to an IPv4 address:

    # ip addr add 192.0.2.1/24 dev dummy0 nodad home mngtmpaddr noprefixroute
    # ip -4 addr show dev dummy0
    2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
        inet 192.0.2.1/24 scope global noprefixroute dummy0
           valid_lft forever preferred_lft forever

Or worse, by sending a malicious netlink command:

    # ip -4 addr show dev dummy0
    2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
        inet 192.0.2.1/24 scope global nodad optimistic dadfailed home tentative mngtmpaddr noprefixroute stable-privacy dummy0
           valid_lft forever preferred_lft forever
Signed-off-by: NMatteo Croce <mcroce@redhat.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      47ce4427
    • E
      igmp: fix memory leak in igmpv3_del_delrec() · aee5dd00
      由 Eric Dumazet 提交于 
      [ Upstream commit e5b1c6c6277d5a283290a8c033c72544746f9b5b ]

im->tomb and/or im->sources might not be NULL, but we
currently overwrite their values blindly.

Using swap() will make sure the following call to kfree_pmc(pmc)
will properly free the psf structures.

Tested with the C repro provided by syzbot, which basically does :

 socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 3
 setsockopt(3, SOL_IP, IP_ADD_MEMBERSHIP, "\340\0\0\2\177\0\0\1\0\0\0\0", 12) = 0
 ioctl(3, SIOCSIFFLAGS, {ifr_name="lo", ifr_flags=0}) = 0
 setsockopt(3, SOL_IP, IP_MSFILTER, "\340\0\0\2\177\0\0\1\1\0\0\0\1\0\0\0\377\377\377\377", 20) = 0
 ioctl(3, SIOCSIFFLAGS, {ifr_name="lo", ifr_flags=IFF_UP}) = 0
 exit_group(0)                    = ?

BUG: memory leak
unreferenced object 0xffff88811450f140 (size 64):
  comm "softirq", pid 0, jiffies 4294942448 (age 32.070s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 ff ff ff ff 00 00 00 00  ................
    00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000c7bad083>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
    [<00000000c7bad083>] slab_post_alloc_hook mm/slab.h:439 [inline]
    [<00000000c7bad083>] slab_alloc mm/slab.c:3326 [inline]
    [<00000000c7bad083>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
    [<000000009acc4151>] kmalloc include/linux/slab.h:547 [inline]
    [<000000009acc4151>] kzalloc include/linux/slab.h:742 [inline]
    [<000000009acc4151>] ip_mc_add1_src net/ipv4/igmp.c:1976 [inline]
    [<000000009acc4151>] ip_mc_add_src+0x36b/0x400 net/ipv4/igmp.c:2100
    [<000000004ac14566>] ip_mc_msfilter+0x22d/0x310 net/ipv4/igmp.c:2484
    [<0000000052d8f995>] do_ip_setsockopt.isra.0+0x1795/0x1930 net/ipv4/ip_sockglue.c:959
    [<000000004ee1e21f>] ip_setsockopt+0x3b/0xb0 net/ipv4/ip_sockglue.c:1248
    [<0000000066cdfe74>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2618
    [<000000009383a786>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3126
    [<00000000d8ac0c94>] __sys_setsockopt+0x98/0x120 net/socket.c:2072
    [<000000001b1e9666>] __do_sys_setsockopt net/socket.c:2083 [inline]
    [<000000001b1e9666>] __se_sys_setsockopt net/socket.c:2080 [inline]
    [<000000001b1e9666>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2080
    [<00000000420d395e>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301
    [<000000007fd83a4b>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 24803f38 ("igmp: do not remove igmp souce list info when set link down")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Reported-by: syzbot+6ca1abd0db68b5173a4f@syzkaller.appspotmail.com
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      aee5dd00
    • H
      hv_netvsc: Fix extra rcu_read_unlock in netvsc_recv_callback() · 9770fe1b
      由 Haiyang Zhang 提交于 
      [ Upstream commit be4363bdf0ce9530f15aa0a03d1060304d116b15 ]

There is an extra rcu_read_unlock left in netvsc_recv_callback(),
after a previous patch that removes RCU from this function.
This patch removes the extra RCU unlock.

Fixes: 345ac089 ("hv_netvsc: pass netvsc_device to receive callback")
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      9770fe1b
    • T
      caif-hsi: fix possible deadlock in cfhsi_exit_module() · d7cdac6d
      由 Taehee Yoo 提交于 
      [ Upstream commit fdd258d49e88a9e0b49ef04a506a796f1c768a8e ]

cfhsi_exit_module() calls unregister_netdev() under rtnl_lock().
but unregister_netdev() internally calls rtnl_lock().
So deadlock would occur.

Fixes: c4125400 ("caif-hsi: Add rtnl support")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d7cdac6d
    • B
      bnx2x: Prevent load reordering in tx completion processing · 8fb37be1
      由 Brian King 提交于 
      [ Upstream commit ea811b795df24644a8eb760b493c43fba4450677 ]

This patch fixes an issue seen on Power systems with bnx2x which results
in the skb is NULL WARN_ON in bnx2x_free_tx_pkt firing due to the skb
pointer getting loaded in bnx2x_free_tx_pkt prior to the hw_cons
load in bnx2x_tx_int. Adding a read memory barrier resolves the issue.
Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8fb37be1
  3. 26 7月, 2019 24 次提交