Add necessary definitions to clock framework to allow changing
dpll4_m5_ck rate.  This is used by the camera code.
Signed-off-by: NJouni Högander <jouni.hogander@nokia.com>
Signed-off-by: NTuukka Toivonen <tuukka.o.toivonen@nokia.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

The correct parent of the McBSP 2, 3, and 4 functional clocks is
PER_96M_FCLK, not CORE_96M_FCLK.  Fix this in the OMAP clock tree.
Reported by Nicole Chalhoub <n-chalhoub@ti.com>.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Nicole Chalhoub <n-chalhoub@ti.com>

UART1 & 2 were missing clockdomains resulting in broken omap_hwmod
init for these devices.
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Commit 10db25fe causes the following
kernel messages during N800 boot (and presumably all other 2420
boards):

[    0.000000] BUG: mapping for 0x58000000 at 0xe0000000 overlaps vmalloc space
[    0.000000] BUG: mapping for 0x59000000 at 0xe1000000 overlaps vmalloc space
[    0.000000] BUG: mapping for 0x5a000000 at 0xe2000000 overlaps vmalloc space

Fix by remapping the IVA memory areas somewhere outside vmalloc space.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Tony Lindgren <tony@atomide.com>

Out of the three major OMAP2 chip types, OMAP2420, OMAP2430, and OMAP3430,
we only map the IVA on OMAP2420.  The memory mapping is not shared between
OMAP2420 and OMAP2430, so it is inappropriate to label those macros as
'24XX'; this patch changes them to '2420'.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

In OMAP2/3 some of the clock-domains which did not have control
facility were being falsely written to and read using the CM_CLKSTCTRL
register though it did not exist for them. One check is added to remove
this flaw.
Signed-off-by: NAbhijit Pagare <abhijitpagare@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>

Remove duplicated #include('s) in
  arch/arm/mach-omap2/clock34xx.c
  arch/arm/mach-omap2/io.c
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Fix Niagara2 perf event handling.
  sparc64: Fix NMI programming when perf events are active.
  bbc_envctrl: Clean up properly if kthread_run() fails.

This reverts commit ae1b22f6.

As Linus said in 982d007a: "There was something really messy about
cmpxchg8b and clone CPU's, so if you enable it on other CPUs later, do it
carefully."

This breaks lguest for those configs, but we can fix that by emulating
if we have to.

Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=14884Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2: Handle O_DIRECT when writing to a refcounted cluster.

* 'for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6:
  ASoC: fixup oops in generic AC97 codec glue
  ASoC: fix params_rate() macro use in several codecs
  ASoC: fsi-ak4642: Remove ak4642_add_i2c_device

For chips like Niagara2 that have true overflow indications
in the %pcr (which we don't actually need and don't use)
the interrupt signal persists until the overflow bits are
cleared by an explicit %pcr write.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If perf events are active, we should not reset the %pcr to
PCR_PIC_PRIV.  That perf events code does the management.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In bbc_envctrl_init() we have to unlink the fan and temp instances
from the lists because our caller is going to free up the 'bp' object
if we return an error.

We can't rely upon bbc_envctrl_cleanup() to do this work for us in
this case.
Reported-by: NPatrick Finnegan <pat@computer-refuge.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'limits_cleanup' of git://decibel.fi.muni.cz/~xslaby/linux:
  resource: add helpers for fetching rlimits
  resource: move kernel function inside __KERNEL__
  SECURITY: selinux, fix update_rlimit_cpu parameter

* 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux:
  ARM: S3C: Fix NAND device registration by s3c_nand_set_platdata().
  ARM: S3C24XX: touchscreen device definition
  ARM: mach-bast: add NAND_SCAN_SILENT_NODEV to optional devices
  ARM: mach-osiris: add NAND_SCAN_SILENT_NODEV to optional devices
  ARM: S3C24XX: touchscreen device definition

Holding locks over device_del -> kobject_del -> sysfs_deactivate can
cause deadlocks if those same locks are grabbed in sysfs show or store
methods.

The I model s_active count + completion as a sleeping read/write lock.
I describe to lockdep sysfs_get_active as a read_trylock,
sysfs_put_active as a read_unlock, and sysfs_deactivate as a
write_lock and write_unlock pair.  This seems to capture the essence
for purposes of finding deadlocks, and in my testing gives finds real
issues and ignores non-issues.

This brings us back to holding locks over kobject_del is a problem
that ideally we should find a way of addressing, but at least lockdep
can tell us about the problems instead of requiring developers to debug
rare strange system deadlocks, that happen when sysfs files are removed
while being written to.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We kill the guest, but then we blatt random stuff.
Reported-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] Update default configuration.
  [S390] Have param.h simply include <asm-generic/param.h>.
  [S390] qdio: convert global statistics to per-device stats

* 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  binfmt_elf_fdpic: Fix build breakage introduced by coredump changes.
  sh: update defconfigs.
  sh: Don't default enable PMB support.
  sh: Disable PMB for SH4AL-DSP CPUs.
  sh: Only provide a PCLK definition for legacy CPG CPUs.

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Calculate metadata requirements more accurately
  ext4: Fix accounting of reserved metadata blocks

We wrap the smm calls and other bits with the BKL push down as a
precaution but they can probably go
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Nobody seems to want to own I2O patches so sending this one directly.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The BKL is in this function because of the BKL pushdown (see commit
f8f2c79d)

It is not needed here because the mutex_lock sonypi_device.lock provides
the necessary locking.

sonypi_misc_ioctl can be converted to unlocked ioctls since it relies on
its own locking (the mutex sonypi_device.lock) and not the bkl

Document that llseek is not needed by explictly setting it to no_llseek

LKML-Reference: <alpine.LFD.2.00.0910192019420.3563@localhost.localdomain>
Signed-off-by: NJohn Kacur <jkacur@redhat.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: update mailing list address
  nilfs2: Storage class should be before const qualifier
  nilfs2: trivial coding style fix

Initialize the glue by calling snd_soc_new_ac97_codec() as is done
in other ASoC AC97 codecs.  Fixes an oops caused by dereferencing
uninitialized members in snd_soc_new_pcms().

Run-tested on Au1250.
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

We want to be sure that compiler fetches the limit variable only
once, so add helpers for fetching current and maximal resource
limits which do that.

Add them to sched.h (instead of resource.h) due to circular dependency
 sched.h->resource.h->task_struct
Alternative would be to create a separate res_access.h or similar.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: James Morris <jmorris@namei.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>

It is an internal function. Move it inside __KERNEL__ ifdef, along
with task_struct declaration.

Then we get:
--- /usr/include/linux/resource.h       2009-09-14 15:09:29.000000000 +0200
+++ usr/include/linux/resource.h       2010-01-04 11:30:54.000000000 +0100
@@ -3,8 +3,6 @@

 #include <linux/time.h>

-struct task_struct;
-
 /*
  * Resource control/accounting header file for linux
  */
@@ -70,6 +68,5 @@
  */
 #include <asm/resource.h>

-int getrusage(struct task_struct *p, int who, struct rusage *ru);

 #endif

***********

include/linux/Kbuild is untouched, since unifdef is run even on
headers-y nowadays.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>

Don't pass current RLIMIT_RTTIME to update_rlimit_cpu() in
selinux_bprm_committing_creds, since update_rlimit_cpu expects
RLIMIT_CPU limit.

Use proper rlim[RLIMIT_CPU].rlim_cur instead to fix that.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Eric Paris <eparis@parisplace.org>
Cc: David Howells <dhowells@redhat.com>

Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Since the files have identical content, might as well simplify.
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Revamp the qdio performance statistics and move them from procfs to
debugfs using the seq_file interface. Since the statistics are not
intended for the general user the removal of /proc/qdio_perf should
not surprise anyone.

The per device statistics are disabled by default, writing 1 to
/<debugfs mountpoint>/qdio/<device bus ID>/statistics enables the
statistics for the given device.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Commit f6151dfe introduces build
breakage, so this patch fixes it together with some printk formatting
cleanup.
Signed-off-by: NDaisuke HATAYAMA <d.hatayama@jp.fujitsu.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This has the adverse effect of converting many 29bit configs to 32bit
mode, while this is a change that needs to be done manually for each
platform. Turn it off by default in order to cut down on spurious bug
reports.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

While the PMB is available on SH-4A parts, SH4AL-DSP parts exclude it
altogether. As such, explicitly disable PMB support for these parts. If
this changes in the future for newer subtypes, this will have to be made
more fine-grained.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Merge branch 's3c24xx-updates2' into for-linus/samsung

Merge branch 'next-simtec' into for-linus/samsung