On tile architecture (with "make allyesconfig") including
<linux/swiotlb.h> is required to call swiotlb_nr_tbl().
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
Acked-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Move drm_pcie_get_speed_cap_mask() under #ifdef CONFIG_PCI because it
it used only for PCI devices (evergreen, r600, r770), and it uses
PCI interfaces that only exist when CONFIG_PCI=y.

Previously, we tried to compile drm_pcie_get_speed_cap_mask() even when
CONFIG_PCI=n, which fails.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This reverts commit 6f33814b.

The quirk cause a regression, and it looks like the original bug was
simply a lack of FIFO bandwidth on the i915G of the reporter. Which
should eventually be fixed as soon as we get around to implemented
DSPARB FIFO reassignment on gen 3.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52281
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

TTM reservations changes, preparing for new reservation mutex system.

* 'for-airlied' of git://people.freedesktop.org/~mlankhorst/linux:
  drm/ttm: unexport ttm_bo_wait_unreserved
  drm/nouveau: use ttm_bo_reserve_slowpath in validate_init, v2
  drm/ttm: use ttm_bo_reserve_slowpath_nolru in ttm_eu_reserve_buffers, v2
  drm/ttm: add ttm_bo_reserve_slowpath
  drm/ttm: cleanup ttm_eu_reserve_buffers handling
  drm/ttm: remove lru_lock around ttm_bo_reserve
  drm/nouveau: increase reservation sequence every retry
  drm/vmwgfx: always use ttm_bo_is_reserved

It is a bit more precise to compute the total number of pixels first and
then divide, rather than multiplying the line pixel count by the
already-rounded line duration.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Use PCI Express Capability access functions to simplify this code a bit.
For non-PCIe devices or pre-PCIe 3.0 devices that don't implement the Link
Capabilities 2 register, pcie_capability_read_dword() reads a zero.

Since we're only testing whether the bits we care about are set, there's no
need to mask out the other bits we *don't* care about.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

For devices that conform to PCIe r3.0 and have a Link Capabilities 2
register, we test and report every bit in the Supported Link Speeds Vector
field.  For a device that supports both 2.5GT/s and 5.0GT/s, we set both
DRM_PCIE_SPEED_25 and DRM_PCIE_SPEED_50 in the returned mask.

For pre-r3.0 devices, the Link Capabilities 0010b encoding
(PCI_EXP_LNKCAP_SLS_5_0GB) means that both 5.0GT/s and 2.5GT/s are
supported, so set both DRM_PCIE_SPEED_25 and DRM_PCIE_SPEED_50 in this
case as well.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Use the standard #defines rather than bare numbers for the PCIe Link
Capabilities speed bits.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Drivers that register interrupt handlers without the DRM core helpers
don't initialize the .irq_enabled field and drm_dev_to_irq() may fail
when called on them. This shouldn't preclude them from implementing
the vblank IOCTL.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Simplify the Radeon prime implementation by using the default behavior provided
by drm_gem_prime_import and drm_gem_prime_export.

v2:
- Rename functions to radeon_gem_prime_get_sg_table and
  radeon_gem_prime_import_sg_table.
- Delete the now-unused vmapping_count variable.
Signed-off-by: NAaron Plattner <aplattner@nvidia.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Simplify the Nouveau prime implementation by using the default behavior provided
by drm_gem_prime_import and drm_gem_prime_export.

v2: Rename functions to nouveau_gem_prime_get_sg_table and
nouveau_gem_prime_import_sg_table.
Signed-off-by: NAaron Plattner <aplattner@nvidia.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Instead of reimplementing all of the dma_buf functionality in every driver,
create helpers drm_prime_import and drm_prime_export that implement them in
terms of new, lower-level hook functions:

  gem_prime_pin: callback when a buffer is created, used to pin buffers into GTT
  gem_prime_get_sg_table: convert a drm_gem_object to an sg_table for export
  gem_prime_import_sg_table: convert an sg_table into a drm_gem_object
  gem_prime_vmap, gem_prime_vunmap: map and unmap an object

These hooks are optional; drivers can opt in by using drm_gem_prime_import and
drm_gem_prime_export as the .gem_prime_import and .gem_prime_export fields of
struct drm_driver.

v2:
- Drop .begin_cpu_access.  None of the drivers this code replaces implemented
  it.  Having it here was a leftover from when I was trying to include i915 in
  this rework.
- Use mutex_lock instead of mutex_lock_interruptible, as these three drivers
  did.  This patch series shouldn't change that behavior.
- Rename helpers to gem_prime_get_sg_table and gem_prime_import_sg_table.
  Rename struct sg_table* variables to 'sgt' for clarity.
- Update drm.tmpl for these new hooks.

v3:
- Pass the vaddr down to the driver.  This lets drivers that just call vunmap on
  the pointer avoid having to store the pointer in their GEM private structures.
- Move documentation into a /** DOC */ comment in drm_prime.c and include it in
  drm.tmpl with a !P line.  I tried to use !F lines to include documentation of
  the individual functions from drmP.h, but the docproc / kernel-doc scripts
  barf on that file, so hopefully this is good enough for now.
- apply refcount fix from commit be8a42ae
  ("drm/prime: drop reference on imported dma-buf come from gem")
Signed-off-by: NAaron Plattner <aplattner@nvidia.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Move this out of nouveau directory.  As we start to add more encoder
slaves used by other drivers, it makes sense to put the Kconfig bits in
one place.
Signed-off-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Alex writes:
- CS ioctl cleanup and unification.  Unification of a lot of functionality
that was duplicated across multiple generates of hardware.
- Add support for Oland GPUs
- Deprecate UMS support.  Mesa and the ddx dropped support for UMS and
apparently very few people still use it since the UMS CS ioctl was broken
for several kernels and no one reported it.  It was fixed in 3.8/stable.
- Rework GPU reset.  Use the status registers to determine what blocks
to reset.  This better matches the recommended reset programming model.
This also allows us to properly reset blocks besides GFX and DMA.
- Switch the VM set page code to use an IB rather than the ring.  This
fixes overflow issues when doing large page table updates using a small
ring like DMA.
- Several small cleanups and bug fixes.

* 'drm-next-3.9' of git://people.freedesktop.org/~agd5f/linux: (38 commits)
  drm/radeon/dce6: fix display powergating
  drm/radeon: add Oland pci ids
  drm/radeon: radeon-asic updates for Oland
  drm/radeon: add ucode loading support for Oland
  drm/radeon: fill in gpu init for Oland
  drm/radeon: add Oland chip family
  drm/radeon: switch back to using the DMA ring for VM PT updates
  drm/radeon: use IBs for VM page table updates v2
  drm/radeon: don't reset the MC on IGPs/APUs
  drm/radeon: use the reset mask to determine if rings are hung
  drm/radeon: halt engines before disabling MC (si)
  drm/radeon: halt engines before disabling MC (cayman/TN)
  drm/radeon: halt engines before disabling MC (evergreen)
  drm/radeon: halt engines before disabling MC (6xx/7xx)
  drm/radeon: use status regs to determine what to reset (si)
  drm/radeon: use status regs to determine what to reset (cayman)
  drm/radeon: use status regs to determine what to reset (evergreen)
  drm/radeon: use status regs to determine what to reset (6xx/7xx)
  drm/radeon: rework GPU reset on cayman/TN
  drm/radeon: rework GPU reset on cayman/TN
  ...

videomode helpers for of + devicetree stuff, required for new kms drivers

(not the fbdev maintainer).

* tag 'of_videomode_helper' of git://git.pengutronix.de/git/str/linux:
  drm_modes: add of_videomode helpers
  drm_modes: add videomode helpers
  fbmon: add of_videomode helpers
  fbmon: add videomode helpers
  video: add of helper for display timings/videomode
  video: add display_timing and videomode
  viafb: rename display_timing to via_display_timing

Fixes for usb/udl devices
* udl-fixes:
  drm/udl: disable fb_defio by default
  drm/udl: Inline memcmp() for RLE compression of xfer
  drm/udl: make usage as a console safer
  drm/usb: bind driver to correct device

(not the fbcon maintainer pull 2)

fix bug in vgacon on bootup and fbcon losing fonts on startup.

* console-fixes: (50 commits)
  fbcon: don't lose the console font across generic->chip driver switch
  vgacon/vt: clear buffer attributes when we load a 512 character font (v2)

This pulls in most of Linus tree up to -rc6, this fixes the worst lockdep
reported issues and re-enables fbcon lockdep.

(not the fbcon maintainer)
* 'fbcon-locking-fixes' of ssh://people.freedesktop.org/~airlied/linux: (529 commits)
  Revert "Revert "console: implement lockdep support for console_lock""
  fbcon: fix locking harder
  fb: Yet another band-aid for fixing lockdep mess
  fb: rework locking to fix lock ordering on takeover

This reverts commit ff0d05bf.

Now that we have all the locking fixes in place, we can revert the
revert. This re-enables lockdep tracking for the console lock,
daee7797.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Okay so Alan's patch handled the case where there was no registered fbcon,
however the other path entered in set_con2fb_map pit.

In there we called fbcon_takeover, but we also took the console lock in a couple
of places. So push the console lock out to the callers of set_con2fb_map,

this means fbmem and switcheroo needed to take the lock around the fb notifier
entry points that lead to this.

This should fix the efifb regression seen by Maarten.
Tested-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: NLu Hua <huax.lu@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

I've still got lockdep warnings even after Alan's patch, and it seems that
yet more band aids are required to paper over similar paths for
unbind_con_driver() and unregister_con_driver().  After this hack, lockdep
warnings are finally gone.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: stable <stable@vger.kernel.org>
Tested-by: NSedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Adjust the console layer to allow a take over call where the caller
already holds the locks.  Make the fb layer lock in order.

This is partly a band aid, the fb layer is terminally confused about the
locking rules it uses for its notifiers it seems.

[akpm@linux-foundation.org: remove stray non-ascii char, tidy comment]
[akpm@linux-foundation.org: export do_take_over_console()]
[airlied: cleanup another non-ascii char]
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: stable <stable@vger.kernel.org>
Tested-by: NSedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

I've been getting the following warning when doing randbuilds
since forever. Now it finally pissed me off just the perfect
amount so that I can fix it.

  arch/x86/kernel/cpu/intel_cacheinfo.c:489:27: warning: ‘cache_disable_0’ defined but not used [-Wunused-variable]
  arch/x86/kernel/cpu/intel_cacheinfo.c:491:27: warning: ‘cache_disable_1’ defined but not used [-Wunused-variable] arch/x86/kernel/cpu/intel_cacheinfo.c:524:27: warning: ‘subcaches’ defined but not used [-Wunused-variable]

It happens because in randconfigs where CONFIG_SYSFS is not set,
the whole sysfs-interface to L3 cache index disabling is
remaining unused and gcc correctly warns about it. Make it
optional, depending on CONFIG_SYSFS too, as is the case with
other sysfs-related machinery in this file.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Link: http://lkml.kernel.org/r/1359969195-27362-1-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

The boot protocol 2.12 changes were pulled for 3.8, so update the
documentation accordingly.
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

For some reason they didn't get replaced so far by their
paravirt equivalents, resulting in code to be run with
interrupts disabled that doesn't expect so (causing, in the
observed case, a BUG_ON() to trigger) when syscall auditing is
enabled.

David (Cc-ed) came up with an identical fix, so likely this can
be taken to count as an ack from him.
Reported-by: NPeter Moody <pmoody@google.com>
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/5108E01902000078000BA9C5@nat28.tlf.novell.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Tested-by: NPeter Moody <pmoody@google.com>

There seems to be a bad interaction between gem/shmem and defio on top,
I get list corruption on the page lru in the shmem code.

Turn it off for now until we get some more digging done.

Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

As we use a variable length the compiler does not realise that it is a
fixed value of either 2 or 4 bytes. Instead of performing the inline
comparison itself, the compiler inserts a function call to the generic
memcmp routine which is optimised for long comparisons of variable
length. That turns out to be quite expensive...
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge tag 'drm-intel-next-2013-02-01' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Daniel writes:
"Probably the last feature pull for 3.9, there's some fixes outstanding
thought that I'd like to sneak in. And maybe 3.8 takes a bit longer ...
Anyway, highlights of this pull:
- Kill the horrible IS_DISPLAYREG hack to handle the mmio offset movements
  on vlv, big thanks to Ville.
- Dynamic power well support for Haswell, shaves away a bit when only
  using the eDP port on pipe A (Paulo). Plus unclaimed register fixes
  uncovered by this.
- Clarifications of the gpu hang/reset state transitions, hopefully fixing
  a few spurious -EIO deaths in userspace.
- Haswell ELD fixes.
- Some more (pp)gtt cleanups from Ben.
- A few smaller things all over.

Plus all the stuff from the previous rather small pull request:
- Broadcast RBG improvements and reduced color range fixes from Ville.
- Ben is on a "kill legacy gtt code for good" spree, first pile of patches
  included.
- No-relocs and bo lut improvements for faster execbuf from Chris.
- Some refactorings from Imre."

* tag 'drm-intel-next-2013-02-01' of git://people.freedesktop.org/~danvet/drm-intel: (101 commits)
  GPU/i915: Fix acpi_bus_get_device() check in drivers/gpu/drm/i915/intel_opregion.c
  drm/i915: Set the SR01 "screen off" bit in i915_redisable_vga() too
  drm/i915: Kill IS_DISPLAYREG()
  drm/i915: Introduce i915_vgacntrl_reg()
  drm/i915: gen6_gmch_remove can be static
  drm/i915: dynamic Haswell display power well support
  drm/i915: check the power down well on assert_pipe()
  drm/i915: don't send DP "idle" pattern before "normal" on HSW PORT_A
  drm/i915: don't run hsw power well code on !hsw
  drm/i915: kill cargo-culted locking from power well code
  drm/i915: Only run idle processing from i915_gem_retire_requests_worker
  drm/i915: Fix CAGF for HSW
  drm/i915: Reclaim GTT space for failed PPGTT
  drm/i915: remove intel_gtt structure
  drm/i915: Add probe and remove to the gtt ops
  drm/i915: extract hw ppgtt setup/cleanup code
  drm/i915: pte_encode is gen6+
  drm/i915: vfuncs for ppgtt
  drm/i915: vfuncs for gtt_clear_range/insert_entries
  drm/i915: Error state should print /sys/kernel/debug
  ...

Okay you don't really want to use udl devices as your console, but if
you are unlucky enough to do so, you run into a lot of schedule while atomic
due to printk being called from all sorts of funky places. So check if we
are in an atomic context, and queue the damage for later, the next printk
should cause it to appear. This isn't ideal, but it is simple, and seems to
work okay in my testing here.

(dirty area idea came from xenfb)

fixes a bunch of sleeping while atomic issues running fbcon on udl devices.

Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

While looking at plymouth on udl I noticed that plymouth was trying
to use its fb plugin not its drm one, it was trying to drmOpen a driver called
usb not udl, noticed that we actually had out driver pointing at the wrong
device.

Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

If grub2 loads efifb/vesafb, then when systemd starts it can set the console
font on that framebuffer device, however when we then load the native KMS
driver, the first thing it does is tear down the generic framebuffer driver.

The thing is the generic code is doing the right thing, it frees the font
because otherwise it would leak memory. However we can assume that if you
are removing the generic firmware driver (vesa/efi/offb), that a new driver
*should* be loading soon after, so we effectively leak the font.

However the old code left a dangling pointer in vc->vc_font.data and we
can now reuse that dangling pointer to load the font into the new
driver, now that we aren't freeing it.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=892340

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

When we switch from 256->512 byte font rendering mode, it means the
current contents of the screen is being reinterpreted. The bit that holds
the high bit of the 9-bit font, may have been previously set, and thus
the new font misrenders.

The problem case we see is grub2 writes spaces with the bit set, so it
ends up with data like 0x820, which gets reinterpreted into 0x120 char
which the font translates into G with a circumflex. This flashes up on
screen at boot and is quite ugly.

A current side effect of this patch though is that any rendering on the
screen changes color to a slightly darker color, but at least the screen
no longer corrupts.

v2: as suggested by hpa, always clear the attribute space, whether we
are are going to or from 512 chars.

Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Only enable it when we disable the display rather than
at DPMS time since enabling it requires a full modeset
to restore the display state.  Fixes blank screens in
certain cases.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Pull media fixes from Mauro Carvalho Chehab:
 "For a regression fix on a few radio drivers that were preventing radio
  TX to work on those devices"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] radio: set vfl_dir correctly to fix modulator regression

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a few tiny USB fixes for 3.8-rc6.

  Nothing major here, some host controller bug fixes to resolve a number
  of bugs that people have reported, and a bunch of additional device
  ids are added to a number of drivers (which caused code to be deleted
  from the usb-storage driver, always nice)"

* tag 'usb-3.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
  USB: storage: optimize to match the Huawei USB storage devices and support new switch command
  USB: storage: Define a new macro for USB storage match rules
  USB: ftdi_sio: add Zolix FTDI PID
  USB: option: add Changhong CH690
  USB: ftdi_sio: add PID/VID entries for ELV WS 300 PC II
  USB: add OWL CM-160 support to cp210x driver
  USB: EHCI: fix bug in scheduling periodic split transfers
  USB: EHCI: fix for leaking isochronous data
  USB: option: add support for Telit LE920
  USB: qcserial: add Telit Gobi QDL device
  USB: EHCI: fix timer bug affecting port resume
  USB: UHCI: notify usbcore about port resumes
  USB: EHCI: notify usbcore about port resumes
  USB: add usb_hcd_{start,end}_port_resume
  USB: EHCI: unlink one async QH at a time
  USB: EHCI: remove ASS/PSS polling timeout
  usb: Using correct way to clear usb3.0 device's remote wakeup feature.
  usb: Prevent dead ports when xhci is not enabled
  USB: XHCI: fix memory leak of URB-private data
  drivers: xhci: fix incorrect bit test
  ...

Pull DMA mapping fixes from Marek Szyprowski:
 "This pull request contains important bugfix patches for 9
  architectures, which finally fixes broken allmodconfig builds
  introduced in v3.8-rc1.  Those architectures don't use dma_map_ops
  based implementation and require manual update or additional dummy
  implementations of the missing new dma-mapping api functions:
  dma_mmap_coherent and dma_get_sgtable."

* 'fixes-for-v3.8-rc7' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  xtensa: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
  parisc: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
  mn10300: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
  m68k: Provide dma_mmap_coherent() and dma_get_sgtable()
  frv: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
  cris: Provide dma_mmap_coherent() and dma_get_sgtable()
  c6x: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
  blackfin: Provide dma_mmap_coherent() and dma_get_sgtable()
  avr32: Provide dma_mmap_coherent() and dma_get_sgtable()

Pull dlm fix from David Teigland:
 "Thanks to Jana who reported the problem and was able to test this fix
  so quickly."

This fixes an incorrect size check that triggered for CONFIG_COMPAT
whether the code was actually doing compat or not.  The incorrect write
size check broke userland (clvmd) when maximum resource name lengths are
used.

* 'fix-max-write' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: check the write size from user

Merge mix fixes from Andrew Morton.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (12 commits)
  drivers/rtc/rtc-pl031.c: fix the missing operation on enable
  drivers/rtc/rtc-isl1208.c: call rtc_update_irq() from the alarm irq handler
  samples/seccomp: be less stupid about cross compiling
  checkpatch: fix $Float creation of match variables
  memcg: fix typo in kmemcg cache walk macro
  mm: fix wrong comments about anon_vma lock
  MAINTAINERS: update avr32 web ressources
  mm/hugetlb: set PTE as huge in hugetlb_change_protection and remove_migration_pte
  drivers/rtc/rtc-vt8500.c: fix year field in vt8500_rtc_set_time()
  tools/vm: add .gitignore to ignore built binaries
  thp: avoid dumping huge zero page
  nilfs2: fix fix very long mount time issue

The RTC control register should be enabled in the process of
initializing.

Without this patch, I failed to enable RTC in Hisilicon Hi3620 SoC.  The
register mapping section in RTC is always read as zero.  So I doubt that
ST guys may already enable this register in bootloader.  So they won't
meet this issue.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@linaro.org>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Previously the alarm event was not propagated into the RTC subsystem.
By adding a call to rtc_update_irq, this fixes a timeout problem with
the hwclock utility.
Signed-off-by: NJan Luebbe <jlu@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>