Rename snd-usb-lib to snd-usbmidi-lib as MIDI functions are the only
thing it actually contains. Introduce a new header file to only declare
these functions.

Introduced usbmixer.h for all functions exported by usbmixer.c.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

As part of the USB audio code cleanup, move the non-standard ua101
driver out of the way.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If getpaths() returned an odd number this would be a buffer under-run and an
endless loop.  It turns out that getpaths() can only return even numbers, but
let's make it easy for people auditing code.  With the new code you don't
need to look at getpaths().

This silences a smatch warning.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Do not use hardcoded SNDRV_TIMER_EVENT_START value.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In the original code the condition was always true (hopefully) because
WM8776_HPLVOL is zero.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The Master Control port (MC) is available as the last
PnP resource (OPT005). Use this value instead fo guessing.

Also, add some comments to the code.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch works around misbehaviour of Creative Creative VF0470 Live Cam
which reports 16 kHz sample rate for audio capture while actually producing
8 kHz stream.
Signed-off-by: NArseniy Lartsev <arseniy@fizlesh.ru>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Conflicts:
	sound/usb/usbaudio.c

Remove some code that is no longer needed now that the relevant parts of
the driver have been tested.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

sound/usb/caiaq/midi.h:6: ERROR: "foo* bar" should be "foo *bar"
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Acked-by: NDaniel Mack <daniel@caiaq.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

sound/oss/coproc.h:7: ERROR: trailing whitespace
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

sound/oss/v_midi.h:5: ERROR: code indent should use tabs where possible
sound/oss/v_midi.h:7: ERROR: trailing whitespace
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add support for the Edirol UA-1000 to the UA-101 driver.

Both devices behave the same, so we just have to shuffle around some
interface numbers and name strings.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Some structs in linux/usb/audio.h have got new names to mark them as
part of version 1.0 of the USB audio standard. Follow these changes
in the gadget drivers.

Note that this header and the ALSA USB driver will undergo some
refactoring soon, so there might be another update to the gadgets as
well.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use the definitions from linux/usb/audio.h all over the ALSA USB audio
driver and add some missing definitions there as well.

Use the endpoint attribute macros from linux/usb/ch9 and remove the own
things from sound/usb/usbaudio.h.

Now things are also nicely prefixed which makes understanding the code
easier.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is just a quick hack that needs to be removed once the new units
defined by the audio class v2.0 standard are supported.

However, it allows using these devices for now, without mixer support.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This adds a number of parsers for audio class v2.0. In particular, the
following internals are different and now handled by the code:

* the number of streaming interfaces is now reported by an interface
  association descriptor. The old approach using a proprietary
  descriptor is deprecated.

* The number of channels per interface is now stored in the AS_GENERAL
  descriptor (used to be part of the FORMAT_TYPE descriptor).

* The list of supported sample rates is no longer stored in a variable
  length appendix of the format_type descriptor but is retrieved from
  the device using a class specific GET_RANGE command.

* Supported sample formats are now reported as 32bit bitmap rather than
  a fixed value. For now, this is worked around by choosing just one of
  them.

* A devices needs to have at least one CLOCK_SOURCE descriptor which
  denotes a clockID that is needed im the class request command.

* Many descriptors (format_type, ...) have changed their layout. Handle
  this by casting the descriptors to the appropriate structs.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds some definitions for audio class v2.

Unfortunately, the UNIT types PROCESSING_UNIT and EXTENSION_UNIT have
different numerical representations in both standards, so there is need
for a _V1 add-on now. usbmixer.c is changed accordingly.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In preparation of support for v2.0 audio class, use the structs from
linux/usb/audio.h and add some new ones to describe the fields that are
actually parsed by the descriptor decoders.

Also, factor out code from usb_create_streams(). This makes it easier to
adopt the new iteration logic needed for v2.0.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NChris J Arges <christopherarges@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NFlorian Zumbiehl <florz@florz.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_cs46xx_codec_reset() bypassing the register cache, so as to not
clobber the cached register value during resume.
Signed-off-by: NFlorian Zumbiehl <florz@florz.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Conflicts:
	sound/pci/hda/patch_realtek.c

This patch fixes a division by zero error in the irq handler.

There is a small window between the hw_params() callback and when
runtime->frame_bits is set by ALSA middle layer. When another substream is
already running, if an interrupt is delivered during that window the irq
handler calls pcm_pointer() which does a division by zero. The patch below
makes the irq handler skip substreams that are initialized but not started
yet. Cc to Clemens Ladisch because he proposed an alternate fix.

For more information, please read the original thread in the linux-kernel
mailing list: http://lkml.org/lkml/2010/2/2/187Signed-off-by: NGiuliano Pochini <pochini@shiny.it>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Cc: <stable@kernel.org>

The usbmixer proc file contains mapping between ALSA control API and
USB mixer control units. The purpose of this file is for debugging
and a problem diagnostics.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Merge branch 'topic/misc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into devel

Here's a patch that adds MIDI support through USB for one of the Access
Music synths, the VirusTI.

The synth uses standard USBMIDI protocol on its USB interface 3, although
it does signal "vendor specific" class. A magic string has to be sent on
interface 3 to enable the sending of MIDI from the synth (this string was
found by sniffing usb communication of the Windows driver). This is all
my patch does, and it works on my computer.

Please note that the synth can also do standard usb audio I/O on its
interfaces 2&3, which already works with the current snd-usb-audio driver,
except for the audio input from the synth. I'm going to work on it when I
have some time.
Signed-off-by: NSebastien Alaiwan <sebastien.alaiwan@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de> (cosmetics, list terminator)
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Extend the list of devices whose firmware does not expect more than one
USB MIDI packet in one USB packet.

bug report: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3752Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This patch adds rearranges parts of the initialization code and adds
suspend and resume callbacks.

This patch adds suspend and resume callbacks.
It also rearranges parts of the initialization code so it can be
used in both the first initialization (when the module is loaded we
also have to load default settings) and the resume callback (where
we have to restore the previous settings).
Signed-off-by: NGiuliano Pochini <pochini@shiny.it>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Move the controls init code outside the init_hw() function because is must
not be called during resume.

This patch moves the code that initializes the card's controls with
default valued from the init_hw() function into a separated
set_mixer_defaults() function (one for each of the 16 supported
cards). This change is necessary because during resume we must
resurrect the hardware without losing the previous
settings. set_mixer_defaults() must be called only once when the
module is loaded.
Signed-off-by: NGiuliano Pochini <pochini@shiny.it>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch implements a simple cache for the firmware files when CONFIG_PM is defined.

This patch changes get_firmware(), free_firmware() and adds
free_firmware_cache(). The first two functions implement a very
simple cache and the latter is used to actually release all the stored
firmwares when the module is unloaded. 
When CONFIG_PM is not enabled those functions act as before, that is
free_firmware() releases the firmware immediately and
free_firmware_cache() does nothing.
Signed-off-by: NGiuliano Pochini <pochini@shiny.it>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Changes the way the firmware is passed through functions.

When CONFIG_PM is enabled the firmware cannot be released because the
driver will need it again to resume the card. 
With this patch the firmware is passed as an index of the struct
firmware card_fw[] in place of a pointer. That same index is then used
to locate the firmware in the firmware cache.
Signed-off-by: NGiuliano Pochini <pochini@shiny.it>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

* 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - use WARN_ON_ONCE() for zero-division detection