Fixes Rhine I cards disclosing fragments of previously transmitted frames
in new transmissions.

Before transmission, any socket buffer (skb) shorter than the ethernet
minimum length of 60 bytes was zero-padded.  On Rhine I cards the data can
later be copied into an aligned transmission buffer without copying this
padding.  This resulted in the transmission of the frame with the extra
bytes beyond the provided content leaking the previous contents of this
buffer on to the network.

Now zero-padding is repeated in the local aligned buffer if one is used.

Following a suggestion from the via-rhine maintainer, no attempt is made
here to avoid the duplicated effort of padding the skb if it is known that
an aligned buffer will definitely be used.  This is to make the change
"obviously correct" and allow it to be applied to a stable kernel if
necessary.  There is no change to the flow of control and the changes are
only to the Rhine I code path.

The patch has run on an in-service Rhine-I host without incident.  Frames
shorter than 60 bytes are now correctly zero-padded when captured on a
separate host.  I see no unusual stats reported by ifconfig, and no unusual
log messages.
Signed-off-by: NCraig Brind <craigbrind@gmail.com>
Signed-off-by: NRoger Luethi <rl@hellgate.ch>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

On Sat, Mar 11, Olaf Hering wrote:
> Why is the /sys/class/net/eth0/device symlink not created for the
> mv643xx_eth driver? Does this work for other platform device drivers?
> Seems to work for the ps2 keyboard at least.

The SET_NETDEV_DEV has to be done before a call to register_netdev.  With
the new patch below, the device symlink for the platform device was
created.  Unfortunately, after the 4 ls commands, the network connection
died.  No idea if the box crashed or if something else broke, lost remote
access.

Provide sysfs 'device' in /class/net/ethN Also, set module owner field,
like pcnet32 driver does.
Signed-off-by: NOlaf Hering <olh@suse.de>
Acked-by: NDale Farnsworth <dale@farnsworth.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Apply the same rules as the anon pipe pages, only allow stealing
if no one else is using the page.
Signed-off-by: NJens Axboe <axboe@suse.de>

Currently we rely on the PIPE_BUF_FLAG_LRU flag being set correctly
to know whether we need to fiddle with page LRU state after stealing it,
however for some origins we just don't know if the page is on the LRU
list or not.

So remove PIPE_BUF_FLAG_LRU and do this check/add manually in pipe_to_file()
instead.
Signed-off-by: NJens Axboe <axboe@suse.de>

We need to use the minium of {len, PAGE_SIZE-off}, not {len, PAGE_SIZE}-off.
The latter doesn't make any sense, and could cause us to attempt negative
length transfers...
Signed-off-by: NJens Axboe <axboe@suse.de>

* 'audit.b10' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  [PATCH] Audit Filter Performance
  [PATCH] Rework of IPC auditing
  [PATCH] More user space subject labels
  [PATCH] Reworked patch for labels on user space messages
  [PATCH] change lspp ipc auditing
  [PATCH] audit inode patch
  [PATCH] support for context based audit filtering, part 2
  [PATCH] support for context based audit filtering
  [PATCH] no need to wank with task_lock() and pinning task down in audit_syscall_exit()
  [PATCH] drop task argument of audit_syscall_{entry,exit}
  [PATCH] drop gfp_mask in audit_log_exit()
  [PATCH] move call of audit_free() into do_exit()
  [PATCH] sockaddr patch
  [PATCH] deal with deadlocks in audit_free()

When iptables userspace adds an ipt_standard_target, it calculates the size
of the entire entry as:

sizeof(struct ipt_entry) + XT_ALIGN(sizeof(struct ipt_standard_target))

ipt_standard_target looks like this:

  struct xt_standard_target
  {
        struct xt_entry_target target;
        int verdict;
  };

xt_entry_target contains a pointer, so when compiled for 64 bit the
structure gets an extra 4 byte of padding at the end. On 32 bit
architectures where iptables aligns to 8 byte it will also have 4
byte padding at the end because it is only 36 bytes large.

The compat_ipt_standard_fn in the kernel adjusts the offsets by

  sizeof(struct ipt_standard_target) - sizeof(struct compat_ipt_standard_target),

which will always result in 4, even if the structure from userspace
was already padded to a multiple of 8. On x86 this works out by
accident because userspace only aligns to 4, on all other
architectures this is broken and causes incorrect adjustments to
the size and following offsets.

Thanks to Linus for lots of debugging help and testing.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'splice' of git://brick.kernel.dk/data/git/linux-2.6-block:
  [PATCH] vmsplice: allow user to pass in gift pages
  [PATCH] pipe: enable atomic copying of pipe data to/from user space
  [PATCH] splice: call handle_ra_miss() on failure to lookup page
  [PATCH] Add ->splice_read/splice_write to def_blk_fops
  [PATCH] pipe: introduce ->pin() buffer operation
  [PATCH] splice: fix bugs in pipe_to_file()
  [PATCH] splice: fix bugs with stealing regular pipe pages

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ipath: tidy up white space in a few files
  IB/ipath: fix label name in interrupt handler
  IB/ipath: improve sparse annotation
  IB/ipath: simplify IB timer usage
  IB/ipath: simplify RC send posting
  IB/ipath: prevent hardware from being accessed during reset
  IB/ipath: fix verbs registration
  IB/ipath: change handling of PIO buffers
  IB/ipath: iterate over correct number of ports during reset
  IB/ipath: set up 32-bit DMA mask if 64-bit setup fails
  IB/ipath: fix race with exposing reset file
  IB/mthca: Fix offset in query_gid method

At suspend time, the TSC CPUFREQ_SUSPENDCHANGE notifier change might
wrongly enable interrupt.  cpufreq driver suspend/resume is in interrupt
disabled environment.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The PC Speaker driver's ->probe() routine doesn't even get called in the
64-bit kernels.  The reason for that is that the arch code apparently has
to explictly add a "pcspkr" platform device in order for the driver core to
call the ->probe() routine.  arch/i386/kernel/setup.c unconditionally adds
a "pcspkr" device, but the x86_64 kernel has no code at all related to the
PC Speaker.

The patch below copies the relevant code from i386 to x86_64, which makes
the PC Speaker work for me on x86_64.

Cc: Dmitry Torokhov <dtor_core@ameritech.net>
Acked-by: NAndi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix genrtc's read() routine for 64-bit platforms.  Current gen_rtc_read()
stores 64bit integer and returns 8 even if an user tried to read a 32bit
integer.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make rtc-dev work well on 64-bit platforms with 32-bit userland.  On those
platforms, users might try to read 32-bit integer value.  This patch make
rtc-dev's read() work well for both "int" and "long" size.  This tweak is came
from genrtc driver.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Consider return value of __put_user() when setting up a signal frame
instead of ignoring it.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As pointed out by Paulo Marques <pmarques@grupopie.com> MAX_IPD_TIME is by
a factor of ten too small.  Since this means that we allow ten times more
IPDs in the intended time frame this could result in a cpu check stop of a
physical cpu.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add an nid member to the spu structure, and store the numa id of the spu there
on creation.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Change of_node_to_nid() to traverse the device tree, looking for a numa id.
Cell uses this to assign ids to SPUs, which are children of the CPU node.
Existing users of of_node_to_nid() are altered to use of_node_to_nid_single(),
which doesn't do the traversal.

Export an attach_sysdev_to_node() function, allowing system devices (eg.
SPUs) to link themselves into the numa topology in sysfs.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Based on an older patch from  Mike Kravetz <kravetz@us.ibm.com>

We need to have a mem_map for high addresses in order to make fops->no_page
work on spufs mem and register files.  So far, we have used the
memory_present() function during early bootup, but that did not work when
CONFIG_NUMA was enabled.

We now use the __add_pages() function to add the mem_map when loading the
spufs module, which is a lot nicer.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes two bugs with the way sparsemem interacts with memory add.
They are:

- memory leak if memmap for section already exists

- calling alloc_bootmem_node() after boot

These bugs were discovered and a first cut at the fixes were provided by
Arnd Bergmann <arnd@arndb.de> and Joel Schopp <jschopp@us.ibm.com>.
Signed-off-by: NMike Kravetz <kravetz@us.ibm.com>
Signed-off-by: NJoel Schopp <jschopp@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently loading the ioc3 as a module will cause the ports to be numbered
in reverse order.  This mod maintains the proper order of cards for port
numbering.
Signed-off-by: NPatrick Gefre <pfg@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently we check PageDirty() in order to make the decision to swap out
the page.  However, the dirty information may be only be contained in the
ptes pointing to the page.  We need to first unmap the ptes before checking
for PageDirty().  If unmap is successful then the page count of the page
will also be decreased so that pageout() works properly.

This is a fix necessary for 2.6.17.  Without this fix we may migrate dirty
pages for filesystems without migration functions.  Filesystems may keep
pointers to dirty pages.  Migration of dirty pages can result in the
filesystem keeping pointers to freed pages.

Unmapping is currently not be separated out from removing all the
references to a page and moving the mapping.  Therefore try_to_unmap will
be called again in migrate_page() if the writeout is successful.  However,
it wont do anything since the ptes are already removed.

The coming updates to the page migration code will restructure the code
so that this is no longer necessary.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Blaisorblade's uml-makefile-nicer makes a V=0 build say SYMLINK where
what's happening is really a LINK.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Acked-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

GCC hardened introduces additional symbol refererences (for the canary and
friends), also in modules - add weak export_symbols for them.  We already
tested that the weak declaration creates no problem on both GCC's providing
the function definition and on GCC's which don't provide it.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

*) Rather than duplicate in various buggy ways the application of
   CFLAGS_NO_HARDENING and UNPROFILE (which apply to the same files),
   centralize it in Makefile.rules.  UNPROFILE_OBJS mustn't be listed in
   USER_OBJS but are compiled as such.

I've also verified that unprofile didn't work in the current form, because we
set _c_flags directly (using CFLAGS and not USER_CFLAGS, which is wrong),
which is normally used by c_flags, but we also override c_flags for all
USER_OBJS, and there we don't call unprofile.

Instead it only worked for unmap.o, the only one which wasn't a USER_OBJ.

We need to set c_flags (which is not a public Kbuild API) to clear a lot of
compilation flags like -nostdinc which Kbuild forces on everything.

*) Rather than $(CFLAGS_$(notdir $@)), which expands to CFLAGS_anObj.s when
   building "anObj.s", use $(CFLAGS_$(*F).o) which always accesses
   CFLAGS_anObj.o, like done by Kbuild.

*) Make c_flags apply to all targets having the same basename, rather than
   listing .s, .i, .lst and .o, with the use (which I tested) of

	$(USER_OBJS:.o=.%): c_flags = ...

and of

 -      $(obj)/unmap.c: _c_flags = ...
 +      $(obj)/unmap.%: _c_flags = ...
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

To make some half-assembly stubs compile, disable various "hardened" GCC
features:

*) we can't make it build PIC code as we need %ebx to do syscalls and GCC
   wants it free for PIC

*) we can't leave stack protection as the stub is moved (not relocated!) in
   memory so the RIP-relative access to the canary tries reading from an
   unmapped address and causes a segfault, since we move the stub of various
   megabytes (the exact amount will be decided at runtime) away from the
   link-time address.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move the build of user-offsets to arch/um/sys-$(SUBARCH), where it's located.
So we can also build it via Kbuild with its dependency tracking rather than by
hand.  While hacking here, fix also a lot of little cosmetic things.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Append /usr/lib/uml to the existing PATH environment variable to let execvp()
search uml_net in FHS compliant locations.
Signed-off-by: NMattia Dongili <malattia@linux.it>
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I sent a patch, it was applied as cda402b2,
then it was applied again as 181ae400 by
mistake.  But while the 1st time it modified (correctly) cow_header_v3, the
2nd it modified cow_header_v3_broken.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Blairsorblade noticed some confusion between our use of a system
call's return value and errno.  This patch fixes a number of related
bugs -
	using errno instead of a return value
	using a return value instead of errno
	forgetting to negate a error return to get a positive error code
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Bring defconfig up to date.

Also disable CONFIG_BLK_DEV_UBD_SYNC by default.  By performing synchronous
I/O to the host, it slows things down, only protects against host crashes, and
can make a UML appear to hang while it waits for the host's disk.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The MADVISE_REMOVE-checking code didn't clean up after itself.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove redundant NULL checks before [kv]free + small CodingStyle cleanup for
arch/
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A quick hack to allow skas0 mode to run on 2G/2G hosts.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We need to walk the region list properly.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Suppress the initcall-return-value warnings unless initcall_debug was
specified.

They do find bugs, but they're extremely small ones and as Andi points out,
people get distressed.

Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The apic= option can be used to set the APIC driver too.  When that is done
this code would always produce bogus warnings.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The 32bit version of e820_all_mapped() needs to use u64 to avoid overflows on
PAE systems.  Pointed out by Jan Beulich
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The patch I submitted earlier to fix disabled LAPIC handling in ACPI was
mismerged for some reason I still don't quite understand.  Parts of it was
applied to the wrong function.

This patch fixes it up.

Cc: <len.brown@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When retrying a failed BIO_RW_BARRIER request, we need to keep the reference
in ->nr_pending over the whole retry.  Currently, we only hold the reference
if the failed request is the *last* one to finish - which is silly, because it
would normally be the first to finish.

So move the rdev_dec_pending call up into the didn't-fail branch.  As the rdev
isn't used in the later code, calling rdev_dec_pending earlier doesn't hurt.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>