The way mpt_interrupt() was coded, it was impossible for the unhandled
interrupt detection logic to ever trigger. All interrupt handlers should
return IRQ_NONE when they have nothing to do.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndrew Morton <akpm@osdl.com>
Signed-off-by: NEric Moore <Eric.Moore@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Make two needlessly global functions static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.com>
Signed-off-by: NEric Moore <Eric.Moore@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

I got a NULL derefrence in cdev_del+1 when called from sg_remove. By looking at
the code of sg_add, sg_alloc and sg_remove (all in drivers/scsi/sg.c) I found
out that sg_add is calling sg_alloc but if it fails afterwards it does not
deallocate the space that was allocated in sg_alloc and the redundant entry has
NULL in cdev. When sg_remove is being called, it tries to perform cdev_del to
this NULL cdev and fails.
Signed-off-by: NIshai Rabinovitz <ishai@mellanox.co.il>
Acked-by: NDouglas Gilbert <dougg@torque.net>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

A bit of a brown paper bag issue.  The previous patch to remove the soon
to be ripped out fields that were used in autosense actually broke the
driver.  This patch fixes it and has been tested (honestly).
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This patch adds or modifies the transport class functions
used to notify userspace of session state events.

We modify the session addition up event and add a destruction event
to notify userspace of session creation, relogin and destruction.

And we modify the conn error event to be sent by broadcast
since multiple listeners may want to listen for it.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

So the drivers do not use the channel numbers, but some do
use the target numbers. We were just adding some goofy
variable that just increases for the target nr. This is useless
for software iscsi because it is always zero. And for qla4xxx
the target nr is actually the index of the target/session
in its FW or FLASH tables. We needed to expose this to userspace
so apps could access those numbers so this patch just adds the
target nr to the iscsi session creation functions. This way
when qla4xxx's Hw thinks a session is at target nr 4
in its hw, it is exposed as that number in sysfs.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

qla4xxx is initialized in two steps like other HW drivers.
It allocates the host, sets up the HW, then adds the host.
For iscsi part of HW setup is setting up persistent iscsi
sessions. At that time, the interupts are off and the driver
is not completely set up so we just want to allocate them.
We do not want to add them to sysfs and expose them to userspace
because userspace could try to do lots of fun things with them
like scanning and at that time the driver is not ready.

So this patch breakes up the session creation like other
functions that use the driver model in two the alloc
and add parts. When the driver is ready, it can then add
the sessions and userspace can begin using them.

This also fixes a bug in the addition error patch where
we forgot to do a get on the session.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

I do not remember what I was thinking when we added the channel
as a argument to the session create function. It was probably
due to too much cut and paste work from the FC transport class.

The channel is meaningless for iscsi drivers so this patch drops
its usage everywhere in the iscsi related code.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

iscsi_tcp and iser cannot be rmmod from the kernel when sessions
are running because session removal is driven from userspace. For
those modules we get a module reference when a session is
created then drop it when the session is removed.

For qla4xxx, they can jsut remove the sessions from the pci remove
function like normal HW drivers, so this patch moves the module
reference from the transport class functions shared by all
drivers to the libiscsi functions only used be software iscsi
modules.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Convert iscsi_tcp to new lib functions.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Convert iser to libiscsi get/set param functions.
Fix bugs in it returning old error return values and
have it expose exp_statsn.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Reduce duplication in the software iscsi_transport modules by
adding a libiscsi function to handle the common grunt work.

This also has the drivers return specifc -EXXX values for different
errors so userspace can finally handle them in a sane way.

Also just pass the sysfs buffers to the drivers so HW iscsi can
get/set its string values, like targetname, and initiatorname.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Patch from david.somayajulu@qlogic.com:

Add target discovery event. We may have a setup where the iscsi traffic
is on a different netowrk than the other network traffic. In this case
we will want to do discovery though the iscsi card. This patch adds
a event to the transport class that can be used by hw iscsi cards that
support this.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

I noticed that in_use in st_buffer is not used. The patch below
against 2.6.17-rc3 removes it, assuming there is no future use for it.
It was tested in a sparc SS20 with a DLT4000.
Signed-off-by: NMartin Habets <errandir_news@mph.eclipse.co.uk>
Acked-by: NKai Mäkisara <kai.makisara@kolumbus.fi>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Conflicts:

	drivers/scsi/aacraid/comminit.c

Fixed up by removing the now renamed CONFIG_IOMMU option from
aacraid
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The atp870u driver is the largest stack eater reported by checkstack
(on x86_864, allmodconfig).  This converts the offending function
to kmalloc+kfree struct atp_unit instead of allocating it on the stack.
Was:
0x0000164c atp870u_probe [atp870u]:			3176
Now:
0x0000164c atp870u_probe [atp870u]:			408
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

* Adding 1078 ROC (Raid On Chip) Support - New host adapter

* Moving all PCI Vendor/Device ids to using internal defines; a request
from Christoph/James B. some time ago for when the next chip was added.

* Removing SAS 1066/1066E Vendor/Device IDs, as there are no plans to
manufacture that controller.
Signed-off-by: NEric Moore <Eric.Moore@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

* Wide port support added - using James Bottomley's new SAS wide port API.
(There is a known problem in sas transport layer reported yesterday to
James. The Kobject dev.bus_ids for end devices are not unique across
expanders. I have added a work around in this patch, where I asigning
an unique port identifier for every port within the host - this solves
the problem, but I expect a fix from James in the sas transport).

* Adding target_alloc and target_destroy entry points, and moving code over
from the slave entry points.

* The renaming of some mptscsih_xxx functions declared in mptsas.c,
to mptsas_xxx.

* Target Reset moved from slave_destroy to hotplug work thread
handling (with regard to device removal). Also inhibit IO to end device
while device is being broken down . Talked to James Smart about this
at Linux Expo (with questions of how the fc transport handles this).

* Cleaning up the kzalloc's, and kfree's
Signed-off-by: NEric Moore <Eric.Moore@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

this patch introduces a port object, separates out ports and phys,
with ports becoming the primary objects of the tree.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

MPI Header Update
Signed-off-by: NEric Moore <Eric.Moore@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

If a device gets offlined as a result of the Inquiry sent
during scanning, the following oops can occur. After the
disk gets put into the SDEV_OFFLINE state, the error handler
sends back the failed inquiry, which wakes the thread doing
the scan. This starts a race between the scanning thread
freeing the scsi device and the error handler calling
scsi_run_host_queues to restart the host. Since the disk
is in the SDEV_OFFLINE state, scsi_device_get will still
work, which results in __scsi_iterate_devices getting
a reference to the scsi disk when it shouldn't.

The following execution thread causes the oops:

CPU 0 (scan)				CPU 1 (eh)

---------------------------------------------------------
scsi_probe_and_add_lun
                        ....
                                        scsi_eh_offline_sdevs
                                        scsi_eh_flush_done_q
scsi_destroy_sdev
scsi_device_dev_release
                                        scsi_restart_operations
                                         scsi_run_host_queues
                                          __scsi_iterate_devices
                                           get_device
scsi_device_dev_release_usercontext
                                          scsi_run_queue
                                            <---OOPS--->

The patch fixes this by changing the state of the sdev to SDEV_DEL
before doing the final put_device, which should prevent the race
from occurring.

Original oops follows:

Badness in kref_get at lib/kref.c:32
Call Trace:
[C00000002F4476D0] [C00000000000EE20] .show_stack+0x68/0x1b0 (unreliable)
[C00000002F447770] [C00000000037515C] .program_check_exception+0x1cc/0x5a8
[C00000002F447840] [C00000000000446C] program_check_common+0xec/0x100
 Exception: 700 at .kref_get+0x10/0x28
    LR = .kobject_get+0x20/0x3c
[C00000002F447B30] [C00000002F447BC0] 0xc00000002f447bc0 (unreliable)
[C00000002F447BB0] [C000000000254BDC] .get_device+0x20/0x3c
[C00000002F447C30] [D000000000063188] .scsi_device_get+0x34/0xdc [scsi_mod]
[C00000002F447CC0] [D0000000000633EC] .__scsi_iterate_devices+0x50/0xbc [scsi_mod]
[C00000002F447D60] [D00000000006A910] .scsi_run_host_queues+0x34/0x5c [scsi_mod]
[C00000002F447DF0] [D000000000069054] .scsi_error_handler+0xdb4/0xe44 [scsi_mod]
[C00000002F447EE0] [C00000000007B4E0] .kthread+0x128/0x178
[C00000002F447F90] [C000000000025E84] .kernel_thread+0x4c/0x68
Unable to handle kernel paging request for <7>PCI: Enabling device: (0002:41:01.1), cmd 143
data at address 0x000001b8
Faulting instruction address: 0xd0000000000698e4
sym1: <1010-66> rev 0x1 at pci 0002:41:01.1 irq 216
sym1: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym1: SCSI BUS has been reset.
scsi2 : sym-2.2.2
cpu 0x0: Vector: 300 (Data Access) at [c00000002f447a30]
    pc: d0000000000698e4: .scsi_run_queue+0x2c/0x218 [scsi_mod]
    lr: d00000000006a904: .scsi_run_host_queues+0x28/0x5c [scsi_mod]
    sp: c00000002f447cb0
   msr: 9000000000009032
   dar: 1b8
 dsisr: 40000000
  current = 0xc0000000045fecd0
  paca    = 0xc00000000048ee80
    pid   = 1123, comm = scsi_eh_1
enter ? for help
[c00000002f447d60] d00000000006a904 .scsi_run_host_queues+0x28/0x5c [scsi_mod]
[c00000002f447df0] d000000000069054 .scsi_error_handler+0xdb4/0xe44 [scsi_mod]
[c00000002f447ee0] c00000000007b4e0 .kthread+0x128/0x178
[c00000002f447f90] c000000000025e84 .kernel_thread+0x4c/0x68
Signed-off-by: NBrian King <brking@us.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This is a resend of a patch I generated in response to an email sent
by Ruben Faelens <parasietje@gmail.com>. His original email to
linux-scsi requested a method in which he could spin down a scsi disk
when not in use and have the kernel automatically spin it back up when
an I/O was generated to the disk. The infrastructure to automatically
spin a disk up has been in the scsi error handler for some time now,
but it is not enabled by default. This patch adds an sd sysfs attribute
which allows userspace to enable this behavior.
Signed-off-by: NBrian King <brking@us.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  [netdrvr] Remove long-unused bits from Becker template drivers
  [netdrvr] natsemi: minor cleanups
  [netdrvr] natsemi: Separate out media initialization code
  [PATCH] WAN: update info page for a bunch of my drivers
  [PATCH] drivers/net/hamradio/dmascc.c: fix section mismatch
  [PATCH] Fix phy id for LXT971A/LXT972A
  [PATCH] DM9000 - minor code cleanups
  [PATCH] DM9000 - do no re-init spin lock
  [PATCH] DM9000 - check for MAC left in by bootloader
  [PATCH] DM9000 - better checks for platform resources

* git://git.infradead.org/mtd-2.6:
  [MTD] NAND: Select chip before checking write protect status
  [MTD] CORE mtdchar.c: fix off-by-one error in lseek()
  [MTD] NAND: Fix typo in mtd/nand/ts7250.c
  [JFFS2][XATTR] coexistence between xattr and write buffering support.
  [JFFS2][XATTR] Fix wrong copyright
  [JFFS2][XATTR] Re-define xd->refcnt as atomic_t
  [JFFS2][XATTR] Fix memory leak with jffs2_xattr_ref
  [JFFS2][XATTR] rid unnecessary writing of delete marker.
  [JFFS2][XATTR] Fix ACL bug when updating null xattr by null ACL.
  [JFFS2][XATTR] using 'delete marker' for xdatum/xref deletion
  [MTD] Fix off-by-one error in physmap.c
  [MTD] Remove unused 'nr_banks' variable from ixp2000 map driver
  [MTD NAND] s3c2412 support in s3c2410.c
  [MTD] Initialize 'writesize'
  [MTD] NAND: ndfc fix address offset thinko
  [MTD] NAND: S3C2410 convert prinks to dev_*()s
  [MTD] NAND: Missing fixups

* git://oss.sgi.com:8090/nathans/xfs-2.6:
  [XFS] Fixup whitespace damage in log_write, remove final warning.
  [XFS] Rework code snippets slightly to remove remaining recent-gcc
  [XFS] Fix realtime subvolume expansion, a porting bug b0rked it.  Coverity
  [XFS] Remove a race condition where a linked inode could BUG_ON in
  [XFS] Remove redundant directory checks from inode link operation.
  [XFS] Remove a couple of no-longer-used macros.
  [XFS] Reduce size of xfs_trans_t structure. * remove ->t_forw, ->t_back --
  [XFS] remove unused behaviour lock - shrink XFS vnode as a side effect.
  [XFS] * There is trivial "inode => vnode => inode" conversion, but only
  [XFS] link(2) on directory is banned in VFS.

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PATCH] ata_piix: add ICH6/7/8 to Kconfig
  [PATCH] sata_sil: disable hotplug interrupts on two ATI IXPs
  [PATCH] libata: cosmetic updates
  [PATCH] ata: add some NVIDIA chipset IDs
  [PATCH] libata reduce timeouts
  [PATCH] libata: implement ata_port_max_devices()
  [PATCH] libata: make two functions global
  [PATCH] libata: update ata_do_simple_cmd()
  [PATCH] libata: move ata_do_simple_cmd() below ata_exec_internal()
  [PATCH] libata: clear EH action on device detach
  [PATCH] libata: implement and use ata_deh_dev_action()
  [PATCH] libata: move ata_eh_clear_action() upward
  [PATCH] libata.h needs scatterlist.h
  [libata] sata_vsc: partially revert a PCI ID-related commit
  [libata] Bump versions

The previous "delete" had actually just truncated it to a zero
size, something that can easily happen if you just apply a patch.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Commit 02dd7ae2 ("[PATCH] i2c-i801:
Merge setup function") has a missing return 0 in the _probe() function.
This means the error path is always executed and pci_disable_device() is
called even when the device just got successfully enabled.

Having the SMBus device disabled makes some systems (eg.
Fujitsu-Siemens Lifebook E8010) hang hard during power-off.

Intead of reverting the whole commit this patch fixes it up:
- don't ever call pci_disable_device(), also not in the _remove() function
  to avoid hangs
- fix missing pci_release_region() in error path
Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (25 commits)
  [CIFS] Fix authentication choice so we do not force NTLMv2 unless the
  [CIFS] Fix alignment of unicode strings in previous patch
  [CIFS] Fix allocation of buffers for new session setup routine to allow
  [CIFS] Remove calls to to take f_owner.lock
  [CIFS] remove some redundant null pointer checks
  [CIFS] Fix compile warning when CONFIG_CIFS_EXPERIMENTAL is off
  [CIFS] Enable sec flags on mount for cifs (part one)
  [CIFS] Fix suspend/resume problem which causes EIO on subsequent access to
  [CIFS] fix minor compile warning when config_cifs_weak_security is off
  [CIFS] NTLMv2 support part 5
  [CIFS] Add support for readdir to legacy servers
  [CIFS] NTLMv2 support part 4
  [CIFS] NTLMv2 support part 3
  [CIFS] NTLMv2 support part 2
  [CIFS] Fix mask so can set new cifs security flags properly
  CIFS] Support for older servers which require plaintext passwords - part 2
  [CIFS] Support for older servers which require plaintext passwords
  [CIFS] Fix mapping of old SMB return code Invalid Net Name so it is
  [CIFS] Missing brace
  [CIFS] Do not overwrite aops
  ...

Switch to using the new RAM Kconfig settings, instead of linker defined
regions in ROM specific 68328 startup code.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Switch to using the new RAM Kconfig settings, instead of linker defined
regions in ROM specific 68360 startup code.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Switch to using the new RAM Kconfig settings, instead of linker defined
regions in RAM specific 68360 startup code.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove NO_FORMAT_VEC conditional check. It is not used or defined anywhere.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Collection of fixes for the ColdFire FEC ethernet driver:

. reworked event setting so that it occurs after the MII setup.
  roucaries bastien <roucaries.bastien@gmail.com>
. Do not read cbd_sc in memory for each bit we test. Once per buffer is enough.
. Overrun errors must increase `rx_fifo_errors', not `rx_crc_errors'
. No need for a special value to activate rx or tx.  Only write access matters.
. Simplify parameter of eth_copy_and_sum : `data' has already the right value.
. Some spelling fixes.
Signed-off-by: NPhilippe De Muyter <phdm@macqel.be>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Set different irq priority levels for each IRQ requested.
According to the Freescale ColdFire documentation each separate IRQ
must have its own unique priority/level combination.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for the FEC module in the ColdFire 532x CPU family.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Avoid requesting a `Graceful Transmit Stop' when link has disappeared,
because that request cannot complete without link.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Updated defconfig for m68knommu arch. Includes recent changes to the clock
and RAM configuration options.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add build support for the M523x ColdFire CPU family.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for the Avnet/5282 board.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>