Before, all snapshots and subvolumes lived in a single flat directory.  This
was awkward and confusing because the single flat directory was only writable
with the ioctls.

This commit changes the ioctls to create subvols and snapshots at any
point in the directory tree.  This requires making separate ioctls for
snapshot and subvol creation instead of a combining them into one.

The subvol ioctl does:

btrfsctl -S subvol_name parent_dir

After the ioctl is done subvol_name lives inside parent_dir.

The snapshot ioctl does:

btrfsctl -s path_for_snapshot root_to_snapshot

path_for_snapshot can be an absolute or relative path.  btrfsctl breaks it up
into directory and basename components.

root_to_snapshot can be any file or directory in the FS.  The snapshot
is taken of the entire root where that file lives.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This is the same way the transaction code makes sure that all the
other tree blocks are safely on disk.  There's an extent_io tree
for each root, and any blocks allocated to the tree logs are
recorded in that tree.

At tree-log sync, the extent_io tree is walked to flush down the
dirty pages and wait for them.

The main benefit is less time spent walking the tree log and skipping
clean pages, and getting sequential IO down to the drive.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

File syncs and directory syncs are optimized by copying their
items into a special (copy-on-write) log tree.  There is one log tree per
subvolume and the btrfs super block points to a tree of log tree roots.

After a crash, items are copied out of the log tree and back into the
subvolume.  See tree-log.c for all the details.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This trivial patch contains two locking fixes and a off by one fix.

---
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Commit 597:466b27332893 (btrfs_start_transaction: wait for commits in
progress) breaks the transaction start/stop ioctls by making
btrfs_start_transaction conditionally wait for the next transaction to
start.  If an application artificially is holding a transaction open,
things deadlock.

This workaround maintains a count of open ioctl-initiated transactions in
fs_info, and avoids wait_current_trans() if any are currently open (in
start_transaction() and btrfs_throttle()).  The start transaction ioctl
uses a new btrfs_start_ioctl_transaction() that _does_ call
wait_current_trans(), effectively pushing the join/wait decision to the
outer ioctl-initiated transaction.

This more or less neuters btrfs_throttle() when ioctl-initiated
transactions are in use, but that seems like a pretty fundamental
consequence of wrapping lots of write()'s in a transaction.  Btrfs has no
way to tell if the application considers a given operation as part of it's
transaction.

Obviously, if the transaction start/stop ioctls aren't being used, there
is no effect on current behavior.
Signed-off-by: NSage Weil <sage@newdream.net>
---
 ctree.h       |    1 +
 ioctl.c       |   12 +++++++++++-
 transaction.c |   18 +++++++++++++-----
 transaction.h |    2 ++
 4 files changed, 27 insertions(+), 6 deletions(-)
Signed-off-by: NChris Mason <chris.mason@oracle.com>

To check whether a given file extent is referenced by multiple snapshots, the
checker walks down the fs tree through dead root and checks all tree blocks in
the path.

We can easily detect whether a given tree block is directly referenced by other
snapshot. We can also detect any indirect reference from other snapshot by
checking reference's generation. The checker can always detect multiple
references, but can't reliably detect cases of single reference. So btrfs may
do file data cow even there is only one reference.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

A large reference cache is directly related to a lot of work pending
for the cleaner thread.  This throttles back new operations based on
the size of the reference cache so the cleaner thread will be able to keep
up.

Overall, this actually makes the FS faster because the cleaner thread will
be more likely to find things in cache.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

btrfs_commit_transaction has to loop waiting for any writers in the
transaction to finish before it can proceed.  btrfs_start_transaction
should be polite and not join a transaction that is in the process
of being finished off.

There are a few places that can't wait, basically the ones doing IO that
might be needed to finish the transaction.  For them, btrfs_join_transaction
is added.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The old data=ordered code would force commit to wait until
all the data extents from the transaction were fully on disk.  This
introduced large latencies into the commit and stalled new writers
in the transaction for a long time.

The new code changes the way data allocations and extents work:

* When delayed allocation is filled, data extents are reserved, and
  the extent bit EXTENT_ORDERED is set on the entire range of the extent.
  A struct btrfs_ordered_extent is allocated an inserted into a per-inode
  rbtree to track the pending extents.

* As each page is written EXTENT_ORDERED is cleared on the bytes corresponding
  to that page.

* When all of the bytes corresponding to a single struct btrfs_ordered_extent
  are written, The previously reserved extent is inserted into the FS
  btree and into the extent allocation trees.  The checksums for the file
  data are also updated.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The btree defragger wasn't making forward progress because the new key wasn't
being saved by the btrfs_search_forward function.

This also disables the automatic btree defrag, it wasn't scaling well to
huge filesystems.  The auto-defrag needs to be done differently.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This creates one kthread for commits and one kthread for
deleting old snapshots.  All the work queues are removed.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The existing throttle mechanism was often not sufficient to prevent
new writers from coming in and making a given transaction run forever.
This adds an explicit wait at the end of most operations so they will
allow the current transaction to close.

There is no wait inside file_write, inode updates, or cow filling, all which
have different deadlock possibilities.

This is a temporary measure until better asynchronous commit support is
added.  This code leads to stalls as it waits for data=ordered
writeback, and it really needs to be fixed.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

There is now extent_map for mapping offsets in the file to disk and
extent_io for state tracking, IO submission and extent_bufers.

The new extent_map code shifts from [start,end] pairs to [start,len], and
pushes the locking out into the caller.  This allows a few performance
optimizations and is easier to use.

A number of extent_map usage bugs were fixed, mostly with failing
to remove extent_map entries when changing the file.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

It is very difficult to create a consistent snapshot of the btree when
other writers may update the btree before the commit is done.

This changes the snapshot creation to happen during the commit, while
no other updates are possible.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This forces file data extents down the disk along with the metadata that
references them.  The current implementation is fairly simple, and just
writes out all of the dirty pages in an inode before the commit.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Dead roots are trees left over after a crash, and they were either in the
process of being removed or were waiting to be removed when the box crashed.
Before, a search of the entire tree of root pointers was done on mount
looking for dead roots.  Now, the search is done the first time we load
a root.

This makes mount faster when there are a large number of snapshots, and it
enables the block accounting code to properly update the block counts on
the latest root as old versions of the root are reaped after a crash.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

This adds two types of btree defrag, a run time form that tries to
defrag recently allocated blocks in the btree when they are still in ram,
and an ioctl that forces defrag of all btree blocks.

File data blocks are not defragged yet, but this can make a huge difference
in sequential btree reads.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>