- 20 5月, 2012 1 次提交
-
-
由 Jongpill Lee 提交于
This patch adds function for suspend and resume of Exynos5250. Signed-off-by: NJongpill Lee <boyko.lee@samsung.com> [kgene.kim@samsung.com: re-worked on top of v3.4-rc7] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 16 5月, 2012 2 次提交
-
-
由 Lukasz Majewski 提交于
This patch adds platform data for using S3C-HSOTG driver at Universal_C210 target. Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Joonyoung Shim 提交于
This patch adds hsotg device to the NURI board. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> [Rebased on the newest git/kgene/linux-samsung #for-next] Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 14 5月, 2012 1 次提交
-
-
由 Kyoungil Kim 提交于
The naming EXYNOS4 is changed to EXYNOS for using shared SPI config of EXYNOS4 and EXYNOS5. And S3C64XX_DEV_SPIn configs are added to MACH_SMDK5250 config to use SPI on the EYXNOS5250. Signed-off-by: NKyoungil Kim <ki0351.kim@samsung.com> [kgene.kim@samsung.com: updated because of non-existing config] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 13 5月, 2012 2 次提交
-
-
由 Boojin Kim 提交于
mach-exynos/dma.c is updated to support both exynos4 and exynos5. Signed-off-by: NBoojin Kim <boojin.kim@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Marek Szyprowski 提交于
Commit 069d4e74 ("ARM: EXYNOS4: Remove clock event timers using ARM private timers") removed support for local timers and forced to use MCT as event source. However MCT is not operating properly on early revision of EXYNOS4 SoCs. All UniversalC210 boards are based on it, so that commit broke support for it. This patch provides a workaround that enables UniversalC210 boards to boot again. s5p-timer is used as an event source, it works only for non-SMP builds. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 12 5月, 2012 7 次提交
-
-
由 Sachin Kamat 提交于
Enable FIMC 0,1,2,3 and media device (md) support on SMDK4X12 boards. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sachin Kamat 提交于
MFC (multi-format codec) device is added to SMDK4212 and SMDK4412 boards. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sachin Kamat 提交于
DRM core device and FIMD DRM platform device support is added to SMDKV310 board. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sachin Kamat 提交于
DRM core device and FIMD DRM platform device support is added to Origen board. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Marek Szyprowski 提交于
Add platform device for Exynos DRM core. This device is used for creating DRM user-space device and allocating memory for display buffers. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Marek Szyprowski 提交于
Add core DRM device and alternative platform device data for FIMD DRM subdriver. Based on the initial patch by Joonyoung Shim <jy0922.shim@samsung.com>. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Marek Szyprowski 提交于
Add core DRM device and alternative platform device data for FIMD DRM subdriver. Based on the initial patch by Joonyoung Shim <jy0922.shim@samsung.com>. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 14 4月, 2012 1 次提交
-
-
由 Sachin Kamat 提交于
Add config dependency for Exynos4 and Exynos5 device tree enabled machine files on config options ARCH_EXYNOS4 and ARCH_EXYNOS5 respectively. Enabling machine support without proper ARCH support enabled is incorrect. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 05 4月, 2012 1 次提交
-
-
由 KyongHo Cho 提交于
Handling System MMUs with an identifier is not flexible to manage System MMU platform devices because of the following reasons: 1. A device driver which needs to handle System MMU must know the ID. 2. A System MMU may not present in some implementations of Exynos family. 3. Handling System MMU with IOMMU API does not require an ID. This patch is the result of removing ID of System MMUs. Instead, a device driver that needs to handle its System MMU must use IOMMU API while its descriptor of platform device is given. This patch also includes the following enhancements: - A System MMU device becomes a child if its power domain device. - clkdev Signed-off-by: NKyongHo Cho <pullip.cho@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 15 3月, 2012 1 次提交
-
-
由 Kukjin Kim 提交于
This patch adds a new EXYNOS5 compatible device tree enabled board When using this, a corresponding device tree blob which describes the board's properties should be supplied at boot time to the kernel. Cc: Thomas Abraham <thomas.abraham@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 14 3月, 2012 1 次提交
-
-
由 Kukjin Kim 提交于
This patch adds CONFIG_ARCH_EXYNOS5 and CONFIG_SOC_EXYNOS5250 for supporting EXYNOS5250 SoC and allows supporting EXYNOS4 and EXYNOS5 together. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 11 3月, 2012 6 次提交
-
-
由 Boojin Kim 提交于
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Andrzej Pietrasiewicz 提交于
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Andrzej Pietrasiewicz 提交于
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sachin Kamat 提交于
Enables JPEG support on Origen board. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sachin Kamat 提交于
Enables JPEG support on SMDKV310 board. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sachin Kamat 提交于
This patch enables G2D support on SMDKV310 board. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 31 1月, 2012 1 次提交
-
-
由 Sylwester Nawrocki 提交于
Add voltage regulator and platform data definitions for S5K6AAFX sensor driver and configure I2C6 bus timings. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NHeungJun Kim <riverful.kim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 27 1月, 2012 1 次提交
-
-
由 Thomas Abraham 提交于
Add support for generic power domain for Exynos4 platforms and remove the Samsung specific power domain control for Exynos4. The generic power domain infrastructure is used to control the power domains available on Exynos4. For non-dt platforms, the power domains are statically instantiated. For dt platforms, the power domain nodes found in the device tree are instantiated. Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 20 1月, 2012 3 次提交
-
-
由 Sachin Kamat 提交于
This patch enables G2D support on ORIGEN board. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kamil Debski 提交于
Signed-off-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kamil Debski 提交于
Signed-off-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 26 12月, 2011 1 次提交
-
-
由 Padmavathi Venna 提交于
As SPI platform devices are consolidated to plat-samsung, some corresponding changes are required in the respective machine folder. Setup files are added for SPI GPIO configurations and platform data initialization. Signed-off-by: NPadmavathi Venna <padma.v@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 24 12月, 2011 1 次提交
-
-
由 Tushar Behera 提交于
Signed-off-by: NTushar Behera <tushar.behera@linaro.org> Signed-off-by: NAngus Ainslie <angus.ainslie@linaro.org> Acked-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 23 12月, 2011 4 次提交
-
-
由 Jingoo Han 提交于
Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Jingoo Han 提交于
Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Thomas Abraham 提交于
Add a new EXYNOS4 compatible device tree enabled board file. Boards based on the EXYNOS4 family of SoC's can use this as the machine/board file. When using this machine fike, a corresponding device tree blob which describes the board's properties should be supplied at boot time to the kernel. Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Thomas Abraham 提交于
The pl330 device instances and associated platform data is required only for non-device-tree builds. With device tree enabled, the data about the platform is obtained from the device tree. For images that include both dt and non-dt platforms, an addditional check is added to ensure that static amba device registrations is applicable to only non-dt platforms. Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 19 12月, 2011 2 次提交
-
-
由 Dave Martin 提交于
Making SMP depend on (huge list of MACH_ and ARCH_ configs) is bothersome to maintain and likely to lead to merge conflicts. This patch moves the knowledge of which platforms are SMP-capable to the individual machines. To enable this, a new HAVE_SMP config option is introduced to allow machines to indicate that they can run in a SMP configuration. Signed-off-by: NDave Martin <dave.martin@linaro.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org> (for nomadik, ux500) Acked-by: NTony Lindgren <tony@atomide.com> (for omap) Acked-by: NKukjin Kim <kgene.kim@samsung.com> (for exynos) Acked-by: NSascha Hauer <s.hauer@pengutronix.de> (for imx) Acked-by: NOlof Johansson <olof@lixom.net> (for tegra)
-
由 Dave Martin 提交于
Making CACHE_L2X0 depend on (huge list of MACH_ and ARCH_ configs) is bothersome to maintain and likely to lead to merge conflicts. This patch moves the knowledge of which platforms have a L2x0 or PL310 cache controller to the individual machines. To enable this, a new MIGHT_HAVE_CACHE_L2X0 config option is introduced to allow machines to indicate that they may have such a cache controller independently of each other. Boards/SoCs which cannot reliably operate without the L2 cache controller support will need to select CACHE_L2X0 directly from their own Kconfigs instead. This applies to some TrustZone-enabled boards where Linux runs in the Normal World, for example. Signed-off-by: NDave Martin <dave.martin@linaro.org> Acked-by: NAnton Vorontsov <cbouatmailru@gmail.com> (for cns3xxx) Acked-by: NTony Lindgren <tony@atomide.com> (for omap) Acked-by: NShawn Guo <shawn.guo@linaro.org> (for imx) Acked-by: NKukjin Kim <kgene.kim@samsung.com> (for exynos) Acked-by: NSascha Hauer <s.hauer@pengutronix.de> (for imx) Acked-by: NOlof Johansson <olof@lixom.net> (for tegra)
-
- 06 11月, 2011 1 次提交
-
-
由 Kukjin Kim 提交于
The arch/arm/mach-exynos4 directory (CONFIG_ARCH_EXYNOS4) has made for plaforms based on EXYNOS4 SoCs. But since upcoming Samsung's SoCs such as EXYNOS5 (ARM Cortex A15) can reuse most codes in current mach-exynos4, one mach-exynos directory will be used for them. This patch changes to CONFIG_ARCH_EXYNOS (arch/arm/mach-exynos) but keeps original CONFIG_ARCH_EXYNOS4 in mach-exynos/Kconfig to avoid changing in driver side. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 14 10月, 2011 2 次提交
-
-
由 Sylwester Nawrocki 提交于
Add voltage regulator and platform data definition for M-5MOLS sensor and MIPI-CSI receiver drivers. Add CAM power domain dependencies for FIMC device and set up camera port A GPIO. Configure I2C0 bus timings. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NHeungJun Kim <riverful.kim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sachin Kamat 提交于
This patch enables multi-format codec (MFC) support on ORIGEN board. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 04 10月, 2011 1 次提交
-
-
由 Abhilash Kesavan 提交于
The sleep code for S5PV210 and EXYNOS4 are identical; moreover S5p64X0 and S5PC100 for which support will be added soon can use the same procedure. Create a common sleep code in the plat-s5p directory so that it can be re-used. Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-