The use of strict_strtoul() is not preferred, because strict_strtoul() is
obsolete.  Thus, kstrtoul() should be used.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The previous patch doing vmstats for TLB flushes ("mm: vmstats: tlb flush
counters") effectively missed UP since arch/x86/mm/tlb.c is only compiled
for SMP.

UP systems do not do remote TLB flushes, so compile those counters out on
UP.

arch/x86/kernel/cpu/mtrr/generic.c calls __flush_tlb() directly.  This is
probably an optimization since both the mtrr code and __flush_tlb() write
cr4.  It would probably be safe to make that a flush_tlb_all() (and then
get these statistics), but the mtrr code is ancient and I'm hesitant to
touch it other than to just stick in the counters.

[akpm@linux-foundation.org: tweak comments]
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I was investigating some TLB flush scaling issues and realized that we do
not have any good methods for figuring out how many TLB flushes we are
doing.

It would be nice to be able to do these in generic code, but the
arch-independent calls don't explicitly specify whether we actually need
to do remote flushes or not.  In the end, we really need to know if we
actually _did_ global vs.  local invalidations, so that leaves us with few
options other than to muck with the counters from arch-specific code.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a proper macro to get the corresponding swapper address space
from a swap entry.  Instead of directly accessing "swapper_spaces" array,
use the "swap_address_space" macro.
Signed-off-by: NSunghan Suh <sunghan.suh@samsung.com>
Reviewed-by: NBob Liu <bob.liu@oracle.com>
Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

correct_wcount and inode in mmap_region() just complicate the code.  This
boolean was needed previously, when deny_write_access() was called before
vma_merge(), now we can simply check VM_DENYWRITE and do
allow_write_access() if it is set.

allow_write_access() checks file != NULL, so this is safe even if it was
possible to use VM_DENYWRITE && !file.  Just we need to ensure we use the
same file which was deny_write_access()'ed, so the patch also moves "file
= vma->vm_file" down after allow_write_access().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Colin Cross <ccross@android.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Simple cleanup.  Move "struct inode *inode" variable into "if (file)"
block to simplify the code and avoid the unnecessary check.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Colin Cross <ccross@android.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mmap() doesn't allow the non-anonymous mappings with VM_GROWS* bit set.
In particular this means that mmap_region()->vma_merge(file, vm_flags)
must always fail if "vm_flags & VM_GROWS" is set incorrectly.

So it does not make sense to check VM_GROWS* after we already allocated
the new vma, the only caller, do_mmap_pgoff(), which can pass this flag
can do the check itself.

And this looks a bit more correct, mmap_region() already unmapped the
old mapping at this stage. But if mmap() is going to fail, it should
avoid do_munmap() if possible.

Note: we check VM_GROWS at the end to ensure that do_mmap_pgoff() won't
return EINVAL in the case when it currently returns another error code.

Many thanks to Hugh who nacked the buggy v1.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A few 80-col gymnastics were cleaned up as a result.

Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is possible to swapon a swap area that is too big for the pte width
to handle.

Presently this failure happens silently.

Instead, emit a diagnostic to warn the user.

Testing results, root prompt commands and kernel log messages:

# lvresize /dev/system/swap --size 16G
# mkswap /dev/system/swap
# swapon /dev/system/swap

Jul  7 04:27:22 warfang kernel: Adding 16777212k swap
on /dev/mapper/system-swap.  Priority:-1 extents:1 across:16777212k

# lvresize /dev/system/swap --size 64G
# mkswap /dev/system/swap
# swapon /dev/system/swap

Jul  7 04:27:22 warfang kernel: Truncating oversized swap area, only
using 33554432k out of 67108860k
Jul  7 04:27:22 warfang kernel: Adding 33554428k swap
on /dev/mapper/system-swap.  Priority:-1 extents:1 across:33554428k

[akpm@linux-foundation.org: fix warning]
Signed-off-by: NRaymond Jennings <shentino@gmail.com>
Acked-by: NValdis Kletnieks <valdis.kletnieks@vt.edu>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes following errors:
	- ERROR: "(foo*)" should be "(foo *)"
	- ERROR: "foo ** bar" should be "foo **bar"
Signed-off-by: NVladimir Cernov <gg.kaspersky@gmail.com>
Reviewed-by: NPekka Enberg <penberg@kernel.org>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Simple cleanup.  Every user of vma_set_policy() does the same work, this
looks a bit annoying imho.  And the new trivial helper which does
mpol_dup() + vma_set_policy() to simplify the callers.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The driver core clears the driver data to NULL after device_release or
on probe failure.  Thus, it is not needed to manually clear the device
driver data to NULL.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

At one time we used to set the maximum number of scatter gather elements
on all Smart Array controllers to 32.  At some point in time the
firmware began to write the "appropriate" value for each controller into
the config table.  The cciss driver would then read that and set
h->maxsgentries.

        h->maxsgentries = readl(&(h->cfgtable->MaxSGElements);

On the P600 that value is 544.  Under some workloads a significant
performance reduction may result.  This patch forces the P600 to use
only 32 scatter gather elements.  Other controllers are not affected.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Signed-off-by: NDwight (Bud) Brown <bubrown@redhat.com>
Signed-off-by: NTomas Henzl <thenzl@redhat.com>
Acked-by: NStephen M. Cameron <steve.cameron@hp.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mg_times_out() is used only in this file.  Fix the following sparse
warning:

  drivers/block/mg_disk.c:639:6: warning: symbol 'mg_times_out' was not declared. Should it be static?
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Read block device partition table from command line.  The partition used
for fixed block device (eMMC) embedded device.  It is no MBR, save
storage space.  Bootloader can be easily accessed by absolute address of
data on the block device.  Users can easily change the partition.

This code reference MTD partition, source "drivers/mtd/cmdlinepart.c"
About the partition verbose reference
"Documentation/block/cmdline-partition.txt"

[akpm@linux-foundation.org: fix printk text]
[yongjun_wei@trendmicro.com.cn: fix error return code in parse_parts()]
Signed-off-by: NCai Zhiyong <caizhiyong@huawei.com>
Cc: Karel Zak <kzak@redhat.com>
Cc: "Wanglin (Albert)" <albert.wanglin@huawei.com>
Cc: Marius Groeger <mag@sysgo.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The usage of strict_strtoul() is not preferred, because strict_strtoul()
is obsolete.  Thus, kstrtoul() should be used.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The use of strict_strtoul() is not preferred, because strict_strtoul() is
obsolete.  Thus, kstrtoul() should be used.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

task_struct->pid/tgid should go away.

1. Change same_thread_group() to use task->signal for comparison.

2. Change has_group_leader_pid(task) to compare task_pid(task) with
   signal->leader_pid.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Sergey Dyasly <dserrg@gmail.com>
Reviewed-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Call fiemap ioctl(2) with given start offset as well as an desired mapping
range should show extents if possible.  However, we somehow figure out the
end offset of mapping via 'mapping_end -= cpos' before iterating the
extent records which would cause problems if the given fiemap length is
too small to a cluster size, e.g,

Cluster size 4096:
debugfs.ocfs2 1.6.3
        Block Size Bits: 12   Cluster Size Bits: 12

The extended fiemap test utility From David:
https://gist.github.com/anonymous/6172331

# dd if=/dev/urandom of=/ocfs2/test_file bs=1M count=1000
# ./fiemap /ocfs2/test_file 4096 10
start: 4096, length: 10
File /ocfs2/test_file has 0 extents:
#	Logical          Physical         Length           Flags
	^^^^^ <-- No extent is shown

In this case, at ocfs2_fiemap(): cpos == mapping_end == 1. Hence the
loop of searching extent records was not executed at all.

This patch remove the in question 'mapping_end -= cpos', and loops
until the cpos is larger than the mapping_end as usual.

# ./fiemap /ocfs2/test_file 4096 10
start: 4096, length: 10
File /ocfs2/test_file has 1 extents:
#	Logical          Physical         Length           Flags
0:	0000000000000000 0000000056a01000 0000000006a00000 0000
Signed-off-by: NJie Liu <jeff.liu@oracle.com>
Reported-by: NDavid Weber <wb@munzinger.de>
Tested-by: NDavid Weber <wb@munzinger.de>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: Mark Fashen <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Variable ip in dlmfs_get_root_inode() is defined but not used.  So clean
it up.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Reviewed-by: NJie Liu <jeff.liu@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In o2hb_shutdown_slot() and o2hb_check_slot(), since event is defined as
local, it is only valid during the call stack.  So the following tiny race
case may happen in a multi-volumes mounted environment:

o2hb-vol1                         o2hb-vol2
1) o2hb_shutdown_slot
allocate local event1
2) queue_node_event
add event1 to global o2hb_node_events
                                  3) o2hb_shutdown_slot
                                  allocate local event2
                                  4) queue_node_event
                                  add event2 to global o2hb_node_events
                                  5) o2hb_run_event_list
                                  delete event1 from o2hb_node_events
6) o2hb_run_event_list
event1 empty, return
7) o2hb_shutdown_slot
event1 lifecycle ends
                                  8) o2hb_fire_callbacks
                                  event1 is already *invalid*

This patch lets it wait on o2hb_callback_sem when another thread is firing
callbacks.  And for performance consideration, we only call
o2hb_run_event_list when there is an event queued.
Signed-off-by: NJoyce <xuejiufei@huawei.com>
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since o2nm_get_node_by_num() may return NULL, we add this check in
o2net_accept_one() to avoid possible NULL pointer dereference.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Code in o2net_handler_tree_lookup() may be corrupted by mistake.  So
adjust it to promote readability.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In ocfs2_remove_inode_range(), there is a memory leak.  The variable path
has allocated memory with ocfs2_new_path_from_et(), but it is not free.
Signed-off-by: NYounger Liu <younger.liu@huawei.com>
Reviewed-by: NJie Liu <jeff.liu@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In ocfs2_reflink_xattr_rec(), meta_ac and data_ac are allocated by calling
ocfs2_lock_reflink_xattr_rec_allocators().

Once an error occurs when allocating *data_ac, it frees *meta_ac which is
allocated before.  Here it mistakenly sets meta_ac to NULL but *meta_ac.
Then ocfs2_reflink_xattr_rec() will try to free meta_ac again which is
already invalid.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Reviewed-by: NJie Liu <jeff.liu@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dlm_do_local_recovery_cleanup() should force clean refmap if the owner of
lockres is UNKNOWN.  Otherwise node may hang when umounting filesystems.
Here's the situation:

	Node1                                    Node2
dlmlock()
  -> dlm_get_lock_resource()
send DLM_MASTER_REQUEST_MSG to
other nodes.

                                       trying to master this lockres,
                                       return MAYBE.

selected as the master of lockresA,
set mle->master to Node1,
and do assert_master,
send DLM_ASSERT_MASTER_MSG to Node2.
                                       Node 2 has interest on lockresA
                                       and return
                                       DLM_ASSERT_RESPONSE_MASTERY_REF
                                       then something happened and
                                       Node2 crashed.

Receiving DLM_ASSERT_RESPONSE_MASTERY_REF, set Node2 into refmap, and keep
sending DLM_ASSERT_MASTER_MSG to other nodes

o2hb found node2 down, calling dlm_hb_node_down() -->
dlm_do_local_recovery_cleanup() the master of lockresA is still UNKNOWN,
no need to call dlm_free_dead_locks().

Set the master of lockresA to Node1, but Node2 stills remains in refmap.

When Node1 umount, it found that the refmap of lockresA is not empty and
attempted to migrate it to Node2, But Node2 is already down, so umount
hang, trying to migrate lockresA again and again.
Signed-off-by: Njoyce <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In ocfs2_xattr_set(), if ocfs2_start_trans failed, meta_ac and data_ac
should be free.  Otherwise, It would lead to a memory leak.
Signed-off-by: NYounger Liu <younger.liu@huawei.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: NJie Liu <jeff.liu@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In ocfs2_xattr_value_attach_refcount(), if error occurs when calling
ocfs2_xattr_get_clusters(), it will go with unexpected behavior since
local variables p_cluster, num_clusters and ext_flags are declared without
initialization.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: NJie Liu <jeff.liu@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The ocfs2 path is not properly freed which leads to a memory leak at
__ocfs2_move_extents().

This patch stops the leaks of the ocfs2_path structure.
Signed-off-by: NJie Liu <jeff.liu@oracle.com>
Reviewed-by: NYounger Liu <younger.liu@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In ocfs2_attach_refcount_tree() and ocfs2_duplicate_extent_list(), if
error occurs when calling ocfs2_get_clusters(), it will go with
unexpected behavior as local variables p_cluster, num_clusters and
ext_flags are declared without initialization.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Reviewed-by: NJie Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In ocfs2_acl_from_xattr(), if size is less than sizeof(struct
posix_acl_entry), it returns ERR_PTR(-EINVAL) directly.  Then assign (size
/ sizeof(struct posix_acl_entry)) to count which will be at least 1, that
means the following branch (count < 0) and (count == 0) will never be
true.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: NJoel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

[dan.carpenter@oracle.com: fix up some NULL dereference bugs]
Signed-off-by: NDong Fang <yp.fangdong@gmail.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jeff Liu <jeff.liu@oracle.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix some possible null pointer dereferences that were detected by the
static code analyser, smatch.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Reported-by: NDan Carpenter <error27@gmail.com>
Reported-by: NGuozhonghua <guozhonghua@h3c.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is an issue in reserving and claiming space for localalloc, When
localalloc space is not enough, it would claim space from global_bitmap.
And if there is not enough free space in global_bitmap, the size of
claiming space would set to half of orignal size and retry.

The issue is as follows: osb->local_alloc_bits is set to half of orignal
size in ocfs2_recalc_la_window(), but ac->ac_bits_wanted is set to
osb->local_alloc_default_bits which is not changed.  localalloc always
reserves and claims local_alloc_default_bits space and returns ENOSPC.

So, ac->ac_bits_wanted should be osb->local_alloc_bits which would be
changed.
Signed-off-by: NYounger Liu <younger.liu@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Jeff Liu <jeff.liu@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dlm_request_all_locks() should deal with the status sent from target node
if DLM_LOCK_REQUEST_MSG is sent successfully, or recovery master will fall
into endless loop, waiting for other nodes to send locks and
DLM_RECO_DATA_DONE_MSG to me.

        NodeA                                  NodeB
                                     selected as recovery master
                                     dlm_remaster_locks()
                                     ->dlm_request_all_locks()
                                     send DLM_LOCK_REQUEST_MSG to nodeA

It happened that NodeA cannot alloc memory when it processes this
message.  dlm_request_all_locks_handler() do not queue
dlm_request_all_locks_worker and returns -ENOMEM.  It will never send
locks and DLM_RECO_DATA_DONE_MSG to NodeB.

                                    NodeB do not deal with the status
                                    sent from nodeA, and will fall in
                                    endless loop waiting for the
                                    recovery state of NodeA to be
                                    changed.
Signed-off-by: Njoyce <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Jeff Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Though ocfs2 uses inode->i_mutex to protect i_size, there are both
i_size_read/write() and direct accesses.  Clean up all direct access to
eliminate confusion.
Signed-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The issue scenario is as following:

When fallocating a very large disk space for a small file,
__ocfs2_extend_allocation attempts to get a very large transaction.  For
some journal sizes, there may be not enough room for this transaction,
and the fallocate will fail.

The patch below extends & restarts the transaction as necessary while
allocating space, and should work with even the smallest journal.  This
patch refers ext4 resize.

Test:
# mkfs.ocfs2 -b 4K -C 32K -T datafiles /dev/sdc
...(jounral size is 32M)
# mount.ocfs2 /dev/sdc /mnt/ocfs2/
# touch /mnt/ocfs2/1.log
# fallocate -o 0 -l 400G /mnt/ocfs2/1.log
fallocate: /mnt/ocfs2/1.log: fallocate failed: Cannot allocate memory
# tail -f /var/log/messages
[ 7372.278591] JBD: fallocate wants too many credits (2051 > 2048)
[ 7372.278597] (fallocate,6438,0):__ocfs2_extend_allocation:709 ERROR: status = -12
[ 7372.278603] (fallocate,6438,0):ocfs2_allocate_unwritten_extents:1504 ERROR: status = -12
[ 7372.278607] (fallocate,6438,0):__ocfs2_change_file_space:1955 ERROR: status = -12
^C
With this patch, the test works well.
Signed-off-by: NYounger Liu <younger.liu@huawei.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The driver core clears the driver data to NULL after device_release or
on probe failure.  Thus, it is not needed to manually clear the device
driver data to NULL.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: David Brown <davidb@codeaurora.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Suman Anna <s-anna@ti.com>
Acked-by: NLibo Chen <libo.chen@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

acornfb checks for HAS_VIDC while support for that macro was removed in
v2.6.23 (when the arm26 port was removed).  So we can remove a bit of
dead code.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

do_fork() denies CLONE_THREAD | CLONE_PARENT if NEWUSER | NEWPID.

Then later copy_process() denies CLONE_SIGHAND if the new process will
be in a different pid namespace (task_active_pid_ns() doesn't match
current->nsproxy->pid_ns).

This looks confusing and inconsistent.  CLONE_NEWPID is very similar to
the case when ->pid_ns was already unshared, we want the same
restrictions so copy_process() should also nack CLONE_PARENT.

And it would be better to deny CLONE_NEWUSER && CLONE_SIGHAND as well
just for consistency.

Kill the "CLONE_NEWUSER | CLONE_NEWPID" check in do_fork() and change
copy_process() to do the same check along with ->pid_ns check we already
have.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NAndy Lutomirski <luto@amacapital.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Colin Walters <walters@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>