isa_no_iack_sc_device_interrupt() always gets get_irq_regs() as
argument; kill that argument.

All but two callers of handle_irq() pass get_irq_regs() as argument;
convert the remaining two, kill set_irq_regs() inside handle_irq().
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

callers of ->device_interrupt() do set_irq_regs() now; pt_regs argument
removed, remaining uses of regs in instances of ->device_interrupt()
are switched to get_irq_regs() and will be gone in the next patch.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fallout from previous patch:
 - actually add include/asm-m68k/irq_regs.h
 - missed the prototype of sun3_sched_init()

NB: git diff without argumentgs sucks when you've added
some files...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

read_trylock() is broken on sparc32 (doesn't build and didn't work
right, actually).  Proposed fix:

 - make "writer holds lock" distinguishable from "reader tries to grab
   lock"

 - have __raw_read_trylock() try to acquire the mutex (in LSB of lock),
   terminating spin if we see that there's writer holding it.  Then do
   the rest as we do in read_lock().

Thanks to Ingo for discussion...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: nodemgr: fix startup of knodemgrd

* 'irq-fixes' of git://git.parisc-linux.org/git/linux-2.6:
  [PARISC] More pt_regs removal
  [PARISC] pdc_init no longer exists
  [PARISC] Make firmware calls irqsafe-ish...
  [PA-RISC] Fix boot breakage
  [PARISC] Use set_irq_regs

The problem we can't take advantage of lowest priority delivery mode if
the vectors are allocated for only one cpu at a time.  Nor can we work
around hardware that assumes lowest priority delivery mode is always
used with several cpus.

So this patch introduces the concept of a vector_allocation_domain.  A
set of cpus that will receive an irq on the same vector.  Currently the
code for implementing this is placed in the genapic structure so we can
vary this depending on how we are using the io_apics.

This allows us to restore the previous behaviour of genapic_flat without
removing the benefits of having separate vector allocation for large
machines.

This should also fix the problem report where a hyperthreaded cpu was
receving the irq on the wrong hyperthread when in logical delivery mode
because the previous behaviour is restored.

This patch properly records our allocation of the first 16 irqs to the
first 16 available vectors on all cpus.  This should be fine but it may
run into problems with multiple interrupts at the same interrupt level.
Except for some badly maintained comments in the code and the behaviour
of the interrupt allocator I have no real understanding of that problem.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Acked-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Which vector an irq is assigned to now varies dynamically and is
not needed outside of io_apic.c.  So remove the possibility
of accessing the information outside of io_apic.c and remove
the silly macro that makes looking for users of irq_vector
difficult.

The fact this compiles ensures there aren't any more pieces
of the old CONFIG_PCI_MSI weirdness that I failed to remove.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In commit ace80ab7 I removed the weird
logic that used the vector number as the irq number when MSI was
defined.  However pci_enable_irq was using a different test in the
io_apic_assign_irqs path and I missed it :(

This patch removes the wrong code so no one hits this problem.

This code is only active when a specific set of boot command line
parameters is specified which likely explains why no one has notices
this earlier.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

NFS_CS_INITING > NFS_CS_READY, so instead of waiting for the structure to
get initialised, we currently immediately jump out of the loop without ever
sleeping.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Revert a thinko in commit d2f119fe:
When knodemgrd starts, it needs to sleep until host->generation was
incremented above its initial value of 0.  My wrong logic caused it to
start sending requests when the bus wasn't completely ready.  Seen as
"AT dma reset ctx=0, aborting transmission" messages in 2.6.19-rc1.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Currently, /proc/cpuinfo contains several copies of the information for
whatever processor we happen to be scheduled on. This patch makes it contain
the proper information for each CPU, which is particularly useful on mixed
R12k/R10k IP27 machines.
Signed-off-by: NKarl-Johan Karlsson <creideiki@lysator.liu.se>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

A kernel built with HZ==250 runs about 4 four times too quickly on a
Cobalt RaQ2.
Signed-off-by: NScott Ashcroft <scott.ashcroft@talk21.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] PReP fixup after irq changes
  [POWERPC] SPU fixup after irq changes
  [POWERPC] Fix up after irq changes
  [POWERPC] Fix iseries/smp.c for irq breakage
  [POWERPC] Fix viocons for irq breakage
  [POWERPC] Update iseries_defconfig
  [POWERPC] Fix fsl_soc build breaks
  [POWERPC] Minor fix for bootargs property
  [POWERPC] Update MTFSF_L() comment
  [POWERPC] Update pSeries defconfig for SATA
  [POWERPC] Don't get PCI IRQ from OF for devices with no IRQ
  [POWERPC] Fix zImage decompress location
  [POWERPC] linux,tce-size property is 32 bits
  [POWERPC] Add DTS for MPC8349E-mITX board
  [POWERPC] Fix harmless typo
  [PPC] Fix some irq breakage with ARCH=ppc

... and now with irq_regs.h not forgotten...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

m68k_handle_int() split in two functions: __m68k_handle_int() takes
pt_regs * and does set_irq_regs(); m68k_handle_int() doesn't get pt_regs
*.

Places where we used to call m68k_handle_int() recursively with the same
pt_regs have simply lost the second argument, the rest is switched to
__m68k_handle_int().

The rest of patch is just dropping pt_regs * where needed.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

null pointer dereferencing in reiserfs_read_bitmap_block.
Signed-off-by: NAlexander Zarochentsev <zam@namesys.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Unfortunately one of the recent changes in swsusp has broken the userland
suspend on SMP.  Fix it.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Init list is called with a list parameter that is not equal to the
cachep->nodelists entry under NUMA if more than one node exists.  This is
fully legitimatei.  One may want to populate the list fields before
switching nodelist pointers.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Compile fixes for PReP in ARCH=ppc.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Remove struct pt_regs * from remaining spu irq functions.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Remove struct pt_regs * from all handlers.
Also remove the regs argument from get_irq() functions.
Compile tested with arch/powerpc/config/* and
arch/ppc/configs/prep_defconfig
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Remove pt_regs from ipi_interrupt and timer_interrupt.
Inline smp_do_timer() into its only caller, and unify the SMP and
non-SMP paths.  Fixes a profiling bug.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>

Just a stale prototype
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>

There's no reason why we shouldn't be using _irqsave instead of
_irq for any of these calls. fwiw, this fixes the
"start_kernel(): bug: interrupts were enabled early" message displayed
on bootup recently.
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>

Conditionals were the wrong way around.  Turns out I was booting the
wrong kernel when testing the original fix.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>

Actually set the irq_regs pointer.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>

* 'irq-fixes' of git://git.parisc-linux.org/git/linux-2.6:
  Build fixes for struct pt_regs removal

Signed-off-by: NMatthew Wilcox <matthew@wil.cx>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This make sure that an iseries_defconfig does not inlude
other platforms.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Hrm, there's no way this ever built at time of merge. There's a missing } and
the wrong type on phy_irq.

Also, another const for get_property().

  CC      arch/powerpc/sysdev/fsl_soc.o
arch/powerpc/sysdev/fsl_soc.c: In function 'fs_enet_of_init':
arch/powerpc/sysdev/fsl_soc.c:625: error: assignment of read-only variable 'phy_irq'
arch/powerpc/sysdev/fsl_soc.c:625: warning: assignment makes integer from pointer without a cast
arch/powerpc/sysdev/fsl_soc.c:661: warning: assignment discards qualifiers from pointer target type
arch/powerpc/sysdev/fsl_soc.c:684: error: subscripted value is neither array nor pointer
arch/powerpc/sysdev/fsl_soc.c:687: error: subscripted value is neither array nor pointer
arch/powerpc/sysdev/fsl_soc.c:722: warning: ISO C90 forbids mixed declarations and code
arch/powerpc/sysdev/fsl_soc.c:728: error: invalid storage class for function 'cpm_uart_of_init'
arch/powerpc/sysdev/fsl_soc.c:798: error: initializer element is not constant
arch/powerpc/sysdev/fsl_soc.c:798: error: expected declaration or statement at end of input
make[1]: *** [arch/powerpc/sysdev/fsl_soc.o] Error 1
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

smp_apic_timer_interrupt() needs to stack the pt_regs* for profile_tick.

If any other of those APIC interrupt handlers want to run get_irq_regs() then
their C entrypoint handlers will need the same treatment.

Cc: Andi Kleen <ak@muc.de>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Acked-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>