- 22 8月, 2013 12 次提交
-
-
由 Pavel Emelyanov 提交于
Multiqueue tun devices allow to attach and detach from its queues while keeping the interface itself set on file. Knowing this is critical for the checkpoint part of criu project. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Tun devices cannot be created with ifidex user wants, but it's required by checkpoint-restore project. Long time ago such ability was implemented for rtnl_ops-based interface for creating links (9c7dafbf net: Allow to create links with given ifindex), but the only API for creating and managing tuntap devices is ioctl-based and is evolving with adding new ones (cde8b15f tuntap: add ioctl to attach or detach a file form tuntap device). Following that trend, here's how a new ioctl that sets the ifindex for device, that _will_ be created by TUNSETIFF ioctl looks like. So those who want a tuntap device with the ifindex N, should open the tun device, call ioctl(fd, TUNSETIFINDEX, &N), then call TUNSETIFF. If the index N is busy, then the register_netdev will find this out and the ioctl would be failed with -EBUSY. If setifindex is not called, then it will be generated as before. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amir Vadai 提交于
Some variables could have their scope reduced. Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amir Vadai 提交于
Result of skb_frag_dma_map() and dma_map_single() wasn't checked. Added a check and proper handling in case of failure. Moved the mapping to the beginning of mlx4_en_xmit(), before updating the ring data structure to make error handling easier. Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amir Vadai 提交于
When hardware gets into error state, must notify user about it. When QP in error state no traffic will be tx'ed from the attached tx_ring. Driver should know how to recover from this unexpected state. I will send later on the recovery flow, but having the print shouldn't be delayed. Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eugenia Emantayev 提交于
Fix a bug when FC and PFC are enabled/disabled at the same time. According to ConnectX-3 Programmer Manual these two features are mutial exclusive. So make sure when enabling PFC to turn off global FC and vise versa. Otherwise it hurts the performance. Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amir Vadai 提交于
Fix some coding style issues in this function. Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Each function driver instance uses the MAC address of the lowest function belonging to that physical port as a unique port identifier. This port identifier is read and cached in driver during probe and provided to user space through ndo_get_phys_port_id() Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o Enable diagnostic test via ethtool and QConvergeConsole application when Multiple Tx queues are enabled on 82xx series adapters. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o using ethtool {set|get}_channel option, user can change number of Tx queues for 82xx Series adapter. o updated ethtool -S <ethX> option to display stats from each Tx queue. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o 82xx firmware allows support for multiple Tx queues. This patch will enable multi Tx queue support for 82xx series adapter. Max number of Tx queues supported will be 8. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 8月, 2013 23 次提交
-
-
由 Sean Cross 提交于
Some boards require custom PHY configuration, for example due to trace length differences. Add the ability to configure these registers in order to get the PHY to function on boards that need it. Because PHYs are auto-detected based on MDIO device IDs, allow PHY configuration to be specified in the parent Ethernet device node if no PHY device node is present. Signed-off-by: NSean Cross <xobs@kosagi.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matus Ujhelyi 提交于
Some phy's can be configured to enable wake on lan (e.g. at803x or marvell 88E1318S). There is no way how to enable wol on CPSW with such connected phys. This patch adds this support. It is provided by calling the phy's related code. Tested on board with at8030x connected phy. Wol interrupt line is connected to GPIO0 on am335x. Signed-off-by: NMatus Ujhelyi <ujhelyi.m@gmail.com> Acked-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mugunthan V N 提交于
CPSW driver no longer supports platform register as all the SoCs which has CPSW are supporting DT only booting, so moving cpsw.h header file from platform include to drivers/net/ethernet/ti Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
Use devm_ioremap_resource instead of devm_request_and_ioremap. This was done using the semantic patch scripts/coccinelle/api/devm_ioremap_resource.cocci The relevant call to platform_get_resource was manually moved down to the call to devm_ioremap_resource. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Libo Chen 提交于
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: NLibo Chen <libo.chen@huawei.com> Acked-by: NMugunthan V N <mugunthanvnm@ti.com> Acked-by: NLad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Libo Chen 提交于
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &of_dev->dev, so we can directly pass a struct platform_device. Signed-off-by: NLibo Chen <libo.chen@huawei.com> Acked-by: NMichal Simek <monstr@monstr.eu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Libo Chen 提交于
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &of->dev, so we can directly pass a struct platform_device. Signed-off-by: NLibo Chen <libo.chen@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Libo Chen 提交于
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &of->dev, so we can directly pass a struct platform_device. Signed-off-by: NLibo Chen <libo.chen@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Libo Chen 提交于
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &of->dev, so we can directly pass a struct platform_device. Signed-off-by: NLibo Chen <libo.chen@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Libo Chen 提交于
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &ofdev->dev, so we can directly pass a struct platform_device. Signed-off-by: NLibo Chen <libo.chen@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Libo Chen 提交于
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: NLibo Chen <libo.chen@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
Now that the 'register_type' field of the 'sh_eth' driver's platform data is not used by the driver anymore, it's time to remove it and its initializers from the SH platform code. Also move *enum* declaring values for this field from <linux/sh_eth.h> to the local driver's header file as they're only needed by the driver itself now... Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
The register layout is a SoC characteristic, so it's wrong that it's stored in the otherwise board specific platform data. Add 'register_type' field to 'struct sh_eth_cpu_data', initialize it properly for each SoC, and read it from this structure instead of the platfrom data from now on... Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hyong-Youb Kim 提交于
Add the ndo_busy_poll handler. Use skb_mark_napi_id to mark receive packets with the napi id. For each slice, use per-slice spinlock and state variable to ensure that only one handler processes receive pacekts. Locking, statistics counters, and the ndo_busy_poll handler follow those in the ixgbe driver. So, credit goes to that driver's authors. Signed-off-by: NHyong-Youb Kim <hykim@myri.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Asias He 提交于
memcpy_fromiovec is moved from net/core/iovec.c to lib/iovec.c. linux/uio.h provides the declaration for memcpy_fromiovec. Include linux/uio.h instead of inux/socket.h for it. Signed-off-by: NAsias He <asias@redhat.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anders Larsen 提交于
When attempting to change e.g. the advertising mask when the link is down ecmd->speed is -1 causing mii_ethtool_sset() to bail out. This bug bit when connecting to a gigabit switch through a 4-pin (industrial) cable, since link negotiation would not complete (both endpoints claimed to be gigabit-capable, but this is not possible with only 4 pins). Any attempt to fix this by setting autonegation to not offer 1000Mbps failed as the setting would not be accepted while the link was still down... Set ecmd->speed to SPEED_1000 to satisfy mii_ethtool_sset() (the actual value of ecmd->speed doesn't matter as long as it is valid, since a re-negotation is forced afterwards). Signed-off-by: NAnders Larsen <al@alarsen.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Add the missing unlock before return from function moxart_mac_start_xmit() in the error handling case. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis Kirjanov 提交于
Signed-off-by: NDenis Kirjanov <kda@linux-powerpc.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
The callback function of call_rcu() just calls a kfree(), so we can use kfree_rcu() instead of call_rcu() + callback function. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Wu 提交于
The ethtool core will lower the requested length to the one returned by get_regs_len, therefore no additional check is needed in the get_regs function. Reported-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NPeter Wu <lekensteyn@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neel Patel 提交于
This patch generates a hardware crash notification (NETDEV_REBOOT) during reset. After a hardware crash, ENIC resets all its resources including queue pair filters programmed by USNIC. USNIC registers for this notification, and on receiving it, reprograms the queue pair filters. Signed-off-by: NNeel Patel <neepatel@cisco.com> Signed-off-by: NNishank Trivedi <nistrive@cisco.com> Signed-off-by: NChristian Benvenuti <benve@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neel Patel 提交于
This patch adds an interface for USNIC to proxy firmware commands through ENIC. Signed-off-by: NNeel Patel <neepatel@cisco.com> Signed-off-by: NNishank Trivedi <nistrive@cisco.com> Signed-off-by: NChristian Benvenuti <benve@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neel Patel 提交于
This patch, - Adds new firmware commands for the new Cisco Low Latency NIC (aka. USNIC). Signed-off-by: NNeel Patel <neepatel@cisco.com> Signed-off-by: NNishank Trivedi <nistrive@cisco.com> Signed-off-by: NChristian Benvenuti <benve@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 8月, 2013 5 次提交
-
-
由 Himanshu Madhani 提交于
Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pratik Pujar 提交于
o Use appropriate firmware image file name based on device IDs. Signed-off-by: NPratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
o Loopback initiator function drivers should process loopback time extend AEN. These AENs are triggered by the loopback time extend mailbox command issued by the target function drivers. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
o 84xx adapters support VLAN stripping for PVID. Packets don't have VLAN tag inserted in case of PVID. So packet should follow non vlan path. o Use capability bit to set PVID mode. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-