- 12 11月, 2009 40 次提交
-
-
由 Anton Vorontsov 提交于
- Add power management controller nodes; - Add interrupts for RTC nodes, the RTC interrupt may be used as a wakeup source; - Add sleep properties (DEVDISR bit mask) and sleep-nexus nodes. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
This patch adds suspend/resume support for MPC8540 and MPC8641D- compatible CPUs. To reach sleep state, we just write the SLP bit into the PM control and status register. So far we don't support Deep Sleep mode as found in newer MPC85xx CPUs (i.e. MPC8536). It can be relatively easy implemented though, and for it we reserve 'mem' suspend type. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
So far the driver is used to reset QE upon resume, which is needed on 85xx. Later we can move some QE initialization steps into probe(). Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
This patch adds QE buffer descriptors mode support for the spi_mpc8xxx driver, and as a side effect we now support CPM1 and CPM2 SPI controllers. That means that today we support almost all MPC SPI controllers: - MPC834x-style controllers (support PIO mode only); - CPM1 and CPM2 controllers (support DMA mode only); - QE SPI controllers in CPU mode (PIO mode with shift quirks); - QE SPI controllers in buffer descriptors (DMA) mode; The only controller we don't currently support is a newer eSPI (with a dedicated chip selects and a bit different registers map). Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
Soon there will be more flags introduced in subsequent patches, so let's turn qe_mode into flags. Also introduce mpc8xxx_spi_strmode() and print current SPI mode. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
We'll add more steps soon, so get rid of the duplication. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
This patch fixes the following warning: CC drivers/spi/spi_mpc8xxx.o spi_mpc8xxx.c: In function 'of_mpc8xxx_spi_probe': spi_mpc8xxx.c:681: warning: 'ret' may be used uninitialized in this function Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
This is needed to avoid ugly #ifdefs in drivers. Also update fsl_qe_udc driver so that now it doesn't define its own versions that cause build breakage when the generic stubs are used. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
The bits are generic to CPM devices, so let's move them to the common header file, so drivers won't need to privately reintroduce another bunch of the same bits (as we can't include cpm2.h header together with cpm1.h). Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
struct mcc defined in both immap_qe.h and immap_cpm2.h, so they will conflic when included in a single file. The mcc struct is easy to deal with, since it isn't used in any driver (yet), so let's just rename QE version to qe_mcc. The ucb_ctlr is a bit trickier, since it is used by fsl_qe_udc driver, and the driver supports both CPM and QE UDCs, plus the QE version is used to form a bigger immap struct. I don't want to touch too much of USB code in this series, so for now let's just copy most generic version into the common cpm.h header, later we'll create cpm_usb.h where we'll place common USB structs that are used by QE/CPM UDC and QE Host drivers (FHCI). And as for the structs in qe.h and cpm2.h, just prefix them with qe_ and cpm_. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
When cpm2.h included into spi_mpc8xxx driver, the SPI defines in the header conflict with defines in the driver. We don't need them in the header file, so remove them. Plus remove "struct spi", we'll use a better version in the driver. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Poonam Aggrwal 提交于
P1020 is another member of Freescale QorIQ series of processors. It is an e500 based dual core SOC. Being a scaled down version of P2020 it has following differences from P2020: - 533MHz - 800MHz core frequency. - 256Kbyte L2 cache - Ethernet controllers with classification capabilities(new controller). From board perspective P1020RDB is same as P2020RDB. Signed-off-by: NPoonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
It appears that QE shuts down on all MPC85xx CPUs (i.e. MPC8568 and MPC8569) and thus needs reset upon resume. So modify qe_alive_during_sleep() to account that. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
For MPC8569 CPUs we'll need to reset QE after each suspend, so make qe_reset() code path suitable for repeated invocation, that is: - Don't initialize rheap structures if already initialized; - Don't allocate muram for SDMA if already allocated, just reinitialize registers with previously allocated muram offset; - Remove __init attributes from qe_reset() and cpm_muram_init(); Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Poonam Aggrwal 提交于
This patch creates the dts files for each core and splits the devices between the two cores for P2020RDB. core0 has memory, L2, i2c, spi, dma1, usb, eth0, eth1, crypto, global-util, pci0, core1 has L2, dma2, eth0, pci1, msi. MPIC is shared between two cores but each core will protect its interrupts from other core by using "protected-sources" of mpic. Signed-off-by: NPoonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
This is needed to avoid #ifdefs in MPC85xx suspend/resume code. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
MPC8569 CPUs have four QE RISCs, so we need to increase MAX_QE_RISC constant, otherwise qe_upload_firmware() fails at sanity checking. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: fix panic when trying to destroy a newly allocated Btrfs: allow more metadata chunk preallocation Btrfs: fallback on uncompressed io if compressed io fails Btrfs: find ideal block group for caching Btrfs: avoid null deref in unpin_extent_cache() Btrfs: skip btrfs_release_path in btrfs_update_root and btrfs_del_root Btrfs: fix some metadata enospc issues Btrfs: fix how we set max_size for free space clusters Btrfs: cleanup transaction starting and fix journal_info usage Btrfs: fix data allocation hint start
-
由 Linus Torvalds 提交于
Rafael debugged a resume-time hang (with oopses in workqueue handling) on his laptop that was due to the 'waker' workqueue entry being disconnected and then released without the workqueue entry having been synchronized. Several people were involved, with Oleg Nesterov doing a debugging patch showing what workqueue entry was corrupt etc. This was a regression introduced by commit 7bee549e ("Bluetooth: Add USB autosuspend support to btusb driver") as Rafael points out (not actually bisected, but it became clear once the bug was found). Tested-and-reported-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NOliver Neukum <oliver@neukum.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Josef Bacik 提交于
There is a problem where iget5_locked will look for an inode, not find it, and then subsequently try to allocate it. Another CPU will have raced in and allocated the inode instead, so when iget5_locked gets the inode spin lock again and does a search, it finds the new inode. So it goes ahead and calls destroy_inode on the inode it just allocated. The problem is we don't set BTRFS_I(inode)->root until the new inode is completely initialized. This patch makes us set root to NULL when alloc'ing a new inode, so when we get to btrfs_destroy_inode and we see that root is NULL we can just free up the memory and continue on. This fixes the panic http://www.kerneloops.org/submitresult.php?number=812690 Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: JBD/JBD2: free j_wbuf if journal init fails. ext3: Wait for proper transaction commit on fsync ext3: retry failed direct IO allocations
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - possible read past array alc88[02]_parse_auto_config() sound: rawmidi: fix MIDI device O_APPEND error handling sound: rawmidi: fix checking of O_APPEND when opening MIDI device sound: rawmidi: fix double init when opening MIDI device with O_APPEND ALSA: hda - Avoid quirk for HP dc5750 ALSA: hda - Tweak OLPC XO-1.5 microphone bias ALSA: hda: Use model=auto quirk for Sony VAIO VGN-FW170J using ALC262
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86/PCI: Adjust GFP mask handling for coherent allocations PCI ASPM: fix oops on root port removal
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: pasemi_defconfig update powerpc: 2.6.32 update of defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx powerpc/8xxx: enable IPsec ESP by default on mpc83xx/mpc85xx powerpc/83xx: Fix u-boot partion size for MPC8377E-WLAN boards powerpc/85xx: Fix USB GPIOs for MPC8569E-MDS boards powerpc/82xx: kmalloc failure ignored in ep8248e_mdio_probe() powerpc/85xx: sbc8548 - fixup of PCI-e related DTS fields
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: Use a definition for the userspace cmpxchg emulation syscall [ARM] Fix test for unimplemented ARM syscalls ARM: 5784/1: fix early boot machine ID mismatch error display [ARM] orion5x: update defconfig [ARM] Kirkwood: update defconfig [ARM] Kirkwood: clarify PCIe MEM bus/physical address distinction [ARM] kirkwood: fix PCI I/O port assignment [ARM] kirkwood: fix section mismatch [ARM] OpenRD base: Initialize PCI express and i2c [ARM] properly report mv78100 stepping A1 ARM: 5780/1: KS8695: Fix macro definition bug in regs-switch.c ARM: 5779/1: ep93xx/micro9.c: fix implicit declaration of function __raw_readl and IOMEM RealView: Add sparsemem support for the RealView PBX platform RealView: Remove duplicated #define REALVIEW_SYS_FLAGS* statements RealView: Add default memory configuration Check whether the SCU was already initialised ARMv7: Check whether the SMP/nAMP mode was already enabled [ARM] pxa: fix resume failure by saving/restoring IPRx registers [ARM] pxa/palm: fix incorrect initialization of Palm Tungsten C keyboard [ARM] pxa/zaurus: fix NAND flash OOB layout for Borzoi
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (52 commits) drm/kms: Init the CRTC info fields for modes forced from the command line. drm/radeon/r600: CS parser updates drm/radeon/kms: add debugfs for power management for AtomBIOS devices drm/radeon/kms: initial mode validation support drm/radeon/kms/atom/dce3: call transmitter init on mode set drm/radeon/kms: store detailed connector info drm/radeon/kms/atom/dce3: fix up usPixelClock calculation for Transmitter tables drm/radeon/kms/r600: fix rs880 support v2 drm/radeon/kms/r700: fix some typos in chip init drm/radeon/kms: remove some misleading debugging output drm/radeon/kms: stop putting VRAM at 0 in MC space on r600s. drm/radeon/kms: disable D1VGA and D2VGA if enabled drm/radeon/kms: Don't RMW CP_RB_CNTL drm/radeon/kms: fix coherency issues on AGP cards. drm/radeon/kms: fix rc410 suspend/resume. drm/radeon/kms: add quirk for hp dc5750 drm/radeon/kms/atom: fix potential oops in spread spectrum code drm/kms: typo fix drm/radeon/kms/atom: Make card_info per device drm/radeon/kms/atom: Fix DVO support ...
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: highmem: Fix debug_kmap_atomic() to also handle KM_IRQ_PTE, KM_NMI, and KM_NMI_PTE highmem: Fix race in debug_kmap_atomic() which could cause warn_count to underflow rcu: Fix long-grace-period race between forcing and initialization uids: Prevent tear down race
-
由 Linus Torvalds 提交于
Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: try_one_irq() must be called with irq disabled
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Fix permission checks perf_events: Fix some typo in the perf events config description
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Use root_task_group_empty only with FAIR_GROUP_SCHED sched: Fix kernel-doc function parameter name
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, amd-ucode: Check UCODE_MAGIC before loading the container file x86: Fix error return sequence in __ioremap_caller() x86: Add Phoenix/MSC BIOSes to lowmem corruption list
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: partial revert to fix double brelse WARNING() ext4: Fix return value of ext4_split_unwritten_extents() to fix direct I/O ext4: code clean up for dio fallocate handling ext4: skip conversion of uninit extents after direct IO if there isn't any ext4: fix ext4_ext_direct_IO()'s return value after converting uninit extents ext4: discard preallocation when restarting a transaction during truncate
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] SBC-FITPC2 watchdog driver registration fix
-
git://git.fluff.org/bjdooks/linux由 Linus Torvalds 提交于
* 'fixes-s3c-2632-rc6' of git://git.fluff.org/bjdooks/linux: ARM: S3C64XX: DMA: Free node for non-circular queues ARM: S3C64XX: DMA: Callback with correct buffer pointer ARM: S3C64XX: DMA: Make src and dst transfer size same ARM: S3C64XX: DMA: Unify callback functions for success/failure ARM: S3C64XX: DMA: Protect buffer pointers while manipulation ARM: S3C64XX: Tidy definition and comments in s3c_dma_has_circular() ARM: S3C64XX: Remove duplicate s3c_dma_has_circular() definition for S3C64xx. ARM: SMDK6410: Allocate more GPIO space for WM1190-EV1 ARM: SMDK6410: Configure GPIO pull up for WM835x IRQ line
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (27 commits) V4L/DVB (13314): saa7134: set ts_force_val for the Hauppauge WinTV HVR-1150 V4L/DVB (13313): saa7134: add support for FORCE_TS_VALID mode for mpeg ts input V4L/DVB (13311): uvcvideo: Fix compilation warning with 2.6.32 due to type mismatch with abs() V4L/DVB (13309): uvcvideo: Ignore the FIX_BANDWIDTH for compressed video V4L/DVB (13287): ce6230 - saa7164-cmd: Fix wrong sizeof V4L/DVB (13286): pxa-camera: Fix missing sched.h V4L/DVB (13264): gspca_mr97310a: Change vstart for CIF sensor type 1 cams V4L/DVB (13257): gspca - m5602-s5k4aa: Add vflip for Fujitsu Amilo Xi 2528 V4L/DVB (13256): gspca - m5602-s5k4aa: Add another MSI GX700 vflip quirk V4L/DVB (13255): gspca - m5602-s5k4aa: Add vflip quirk for the Bruneinit laptop V4L/DVB (13240): firedtv: fix regression: tuning fails due to bogus error return V4L/DVB (13237): firedtv: length field corrupt in ca2host if length>127 V4L/DVB (13230): s2255drv: Don't conditionalize video buffer completion on waiting processes V4L/DVB (13202): smsusb: add autodetection support for three additional Hauppauge USB IDs V4L/DVB (13190): em28xx: fix panic that can occur when starting audio streaming V4L/DVB (13170): bttv: Fix reversed polarity error when switching video standard V4L/DVB (13169): bttv: Fix potential out-of-order field processing V4L/DVB (13167): pt1: Fix a compile error on arm V4L/DVB (13132): fix use-after-free Oops, resulting from a driver-core API change V4L/DVB (13131): pxa_camera: fix camera pixel format configuration ...
-
由 Chris Mason 提交于
On an FS where all of the space has not been allocated into chunks yet, the enospc can return enospc just because the existing metadata chunks are full. We get around this by allowing more metadata chunks to be allocated up to a certain limit, and finding the right limit is a little fuzzy. The problem is the reservations for delalloc would preallocate way too much of the FS as metadata. We need to start saying no and just force some IO to happen. But we also need to let a reasonable amount of the FS become metadata. This bumps the hard limit up, later releases will have a better system. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
Currently compressed IO does not deal with not having its entire extent able to be allocated. So if we have enough free space to allocate for the extent, but its not contiguous, it will fail spectacularly. This patch fixes this by falling back on uncompressed IO which lets us spread the delalloc extent across multiple extents. I tested this by making us randomly think the reservation had failed to make it fallback on the uncompressed io way and it seemed to work fine. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
This patch changes a few things. Hopefully the comments are helpfull, but I'll try and be as verbose here. Problem: My fedora box was taking 1 minute and 21 seconds to boot with btrfs as root. Part of this problem was we pick the first block group we can find and start caching it, even if it may not have enough free space. The other problem is we only search for cached block groups the first time around, which we won't find any cached block groups because this is a newly mounted fs, so we end up caching several block groups during bootup, which with alot of fragmentation takes around 30-45 seconds to complete, which bogs down the system. So Solution: 1) Don't cache block groups willy-nilly at first. Instead try and figure out which block group has the most free, and therefore will take the least amount of time to cache. 2) Don't be so picky about cached block groups. The other problem is once we've filled up a cluster, if the block group isn't finished caching the next time we try and do the allocation we'll completely ignore the cluster and start searching from the beginning of the space, which makes us cache more block groups, which slows us down even more. So instead of skipping block groups that are not finished caching when we have a hint, only skip the block group if it hasn't started caching yet. There is one other tweak in here. Before if we allocated a chunk and still couldn't find new space, we'd end up switching the space info to force another chunk allocation. This could make us end up with way too many chunks, so keep track of this particular case. With this patch and my previous cluster fixes my fedora box now boots in 43 seconds, and according to the bootchart is not held up by our block group caching at all. Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Dan Carpenter 提交于
I re-orderred the checks to avoid dereferencing "em" if it was null. Found by smatch static checker. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-