- 11 10月, 2008 1 次提交
-
-
* Include <linux/ata.h> directly in <linux/ide.h> instead of through <linux/hdreg.h>. * Include <linux/hdreg.h> only when needed. Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 25 7月, 2008 2 次提交
-
-
由 Jan Evert van Grootheest 提交于
Remove the ancient version history. Git does a better job. From: Jan Evert van Grootheest <j.e.van.grootheest@caiway.nl> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Jan Evert van Grootheest 提交于
Update email address. From: Jan Evert van Grootheest <j.e.van.grootheest@caiway.nl> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 17 7月, 2008 2 次提交
-
-
Change ->port_init_devs method to take 'ide_drive_t *' as an argument instead of 'ide_hwif_t *' and rename it to ->init_dev. There should be no functional changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
There should be no functional changes caused by this patch. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 16 7月, 2008 1 次提交
-
-
* Remove obsoleted "idebus=" kernel parameter. * Remove no longer needed ide_system_bus_speed() and system_bus_clock() (together with idebus_parameter and system_bus_speed variables). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 27 4月, 2008 9 次提交
-
-
* Add struct ide_io_ports and use it instead of `unsigned long io_ports[]` in ide_hwif_t. * Rename io_ports[] in hw_regs_t to io_ports_array[]. * Use un-named union for 'unsigned long io_ports_array[]' and 'struct ide_io_ports io_ports' in hw_regs_t. * Remove IDE_*_OFFSET defines. v2: * scc_pata.c build fix from Stephen Rothwell. v3: * Fix ctl_adrr typo in Sparc-specific part of ns87415.c. (Noticed by Andrew Morton) Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add "vlb_clock=" parameter for specifying VLB clock frequency (in MHz). * Add "pci_clock=" parameter for specifying PCI bus clock frequency (in MHz). While at it: * qd65xx.c: rename {active,recovery}_cycle variables to {act,rec}_cyc. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Remove obsoleted "idex=" kernel parameters. * Make probe_* and cmd640_vlb variables static. Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ [bart: fix checkpatch.pl errors in ide-lib.c and ppc/mpc8xx.c while at it] Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Tell IDE layer to not manage resources by setting hwif->mmio flag. * Use {request,release}_region() for resources management. * Set ->name field of 'struct ide_port_info' instances in legacy VLB host drivers and use driver name for resources management. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add 'unsigned long config' argument to ide_legacy_device_add() for setting hwif->config_data. * Use ide_find_port_slot() instead of ide_find_port() in ide_legacy_device_add(). * Handle IDE_HFLAG_QD_2ND_PORT and IDE_HFLAG_SINGLE host flags in ide_legacy_device_add(). * Convert qd65xx host driver to use ide_legacy_device_add(). v2: * Update ali14xx, dtc2278, ht6560b and umc8672 host drivers. There should be no functional changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Add ide_legacy_device_add() helper for use by legacy VLB host drivers (+ convert them to use it). There should be no functional changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Move hooks for port/host specific methods from ide_hwif_t to 'struct ide_port_ops'. * Add 'const struct ide_port_ops *port_ops' to 'struct ide_port_info' and ide_hwif_t. * Update host drivers and core code accordingly. While at it: * Rename ata66_*() cable detect functions to *_cable_detect() to match the standard naming. (Suggested by Sergei Shtylyov) v2: * Fix build for bast-ide. (Noticed by Andrew Morton) Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 26 4月, 2008 2 次提交
-
-
* Add IDE_HFLAG_QD_2ND_PORT host flag to indicate the need of skipping first ide_hwifs[] slot for the second port of QD65xx controller. * Handle this new host flag in ide_find_port_slot(). * Convert legacy VLB host drivers to use ide_find_port(). While at it: * Fix couple of printk()-s in qd65xx host driver to not use hwif->name. v2: * Fix qd65xx. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 18 4月, 2008 2 次提交
-
-
Do explicit port setup in legacy VLB host drivers instead of depending on init_ide_data(). This way hwif->io_ports[] and hwif->irq are always correctly set regardless of CONFIG_PCI / CONFIG_BLK_DEV_IDEPCI. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add IDE_{ALTSTATUS,IREASON,BCOUNTL,BCOUNTH}_OFFSET defines. * Remove IDE_*_REG macros - this results in more readable and slightly smaller code. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 19 2月, 2008 2 次提交
-
-
由 Jan Evert van Grootheest 提交于
Prefetch needs to be set for some ide devices to work when connected to a ht6560b interface. This was not always done properly, causing a system with a HD and CD on the primary interface to not work properly. Or, in effect, hang hard. This patch forces prefetch on devices before checking whether it is necessary to change the settings in the interface This patch should also be applied to 2.4. I don't currently have a 2.4 tree around. (also change my email address) Signed-off-by: NJan Evert van Grootheest <janevert@caiway.nl> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Jan Evert van Grootheest 提交于
According to the datasheet, ht6560b only supports up to PIO mode 4. [bart: manually ported it over 2.6.25-rc2] Signed-off-by: NJan Evert van Grootheest <janevert@caiway.nl> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 03 2月, 2008 2 次提交
-
-
* Add ->port_init_devs method to ide_hwif_t for a host specific initialization of devices on a port. Call the new method from ide_port_init_devices(). * Convert ht6560b, qd65xx and opti621 host drivers to use the new ->port_init_devs method. There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Remove 'struct pci_dev *dev' argument from ide_hwif_setup_dma(). * Un-static ide_hwif_setup_dma() and add CONFIG_BLK_DEV_IDEDMA_PCI=n version. * Add 'const struct ide_port_info *d' argument to ide_device_add[_all](). * Factor out generic ports init from ide_pci_setup_ports() to ide_init_port(), move it to ide-probe.c and call it in in ide_device_add_all() instead of ide_pci_setup_ports(). * Move ->mate setup to ide_device_add_all() from ide_port_init(). * Add IDE_HFLAG_NO_AUTOTUNE host flag for host drivers that don't enable ->autotune currently. * Setup hwif->chipset in ide_init_port() but iff pi->chipset is set (to not override setup done by ide_hwif_configure()). * Add ETRAX host handling to ide_device_add_all(). * cmd640.c: set IDE_HFLAG_ABUSE_* also for CONFIG_BLK_DEV_CMD640_ENHANCED=n. * pmac.c: make pmac_ide_setup_dma() return an error value and move DMA masks setup to pmac_ide_setup_device(). * Add 'struct ide_port_info' instances to legacy host drivers, pass them to ide_device_add() calls and then remove open-coded ports initialization. Reviewed-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 02 2月, 2008 1 次提交
-
-
Delete filenames/versions from comments. I'm leaving decisions about adding DRV_VERSION defines and MODULE_VERSION()-s to maintainers of the respective drivers. While at it: * Remove unused VERSION define from ide.c. * Remove unused/stale DRV_VERSION define from au1xxx-ide.c. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 27 1月, 2008 1 次提交
-
-
* Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 20 10月, 2007 3 次提交
-
-
Take ide_lock for prefetch disable/enable in do_special(), then cleanup cmd640 and ht6560b host drivers. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Stop abusing ide_lock lock (switch to a private locking). Fixes same issue as fixed by Alan Cox in atiixp host driver with commit 6c5f8cc3. ht6560b is a bit special cause we still need to leave ide_lock for ->set_pio_mode with 'pio' argument == 8/9 (prefetch disable/enable). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add ide_device_add() helper and convert host drivers to use it instead of open-coded variants. * Make ide_pci_setup_ports() and do_ide_setup_pci_device() take 'u8 *idx' argument instead of 'ata_index_t *index'. * Remove no longer needed ata_index_t. * Unexport probe_hwif_init() and make it static. * Unexport ide_proc_register_port(). There should be no functionality changes caused by this patch (sgiioc4.c: ide_proc_register_port() requires hwif->present to be set and it won't be set if probe_hwif_init() fails). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 12 10月, 2007 1 次提交
-
-
* Add IDE_HFLAG_ABUSE_{PREFETCH,FAST_DEVSEL,DMA_MODES} flags and set them in ht6560, cmd640, cmd64x and sc1200 host drivers. * Add set_pio_mode_abuse() for checking if host driver has a non-standard ->tuneproc() implementation and use it in do_special(). * Add ide_set_pio() for setting PIO mode (it uses hwif->pio_mask to find the maximum PIO mode supported by the host), also add ide_set_max_pio() wrapper for ide_set_pio() to use for auto-tuning. Convert users of ->tuneproc to use ide_set{_max}_pio() where possible. This leaves only do_special(), set_using_pio(), ide_hwif_restore() and ide_set_pio() as a direct users of ->tuneproc. * Remove no longer needed ide_get_best_pio_mode() calls and printk-s reporting PIO mode selected from ->tuneproc implementations. * Rename ->tuneproc hook to ->set_pio_mode and make 'pio' argument const. * Remove stale comment from ide_config_drive_speed(). v2: * Fix "ata_" prefix (Noticed by Jeff). v3: * Minor cleanups/fixups per Sergei's suggestions. v4: * Fix compile problem in drivers/ide/pci/cmd640.c (Noticed by Andrew Morton). * Improve some ->set_pio_mode comments. Reviewed-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 20 7月, 2007 3 次提交
-
-
* Add ATA_PIO[0-6] defines to <linux/ata.h>. * Add ->pio_mask field to ide_pci_device_t and ide_hwif_t. * Add PIO masks to host drivers. <linux/ata.h> change ACK-ed by Jeff Garzik <jeff@garzik.org>. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Drop no longer needed "PIO data" argument from ide_get_best_pio_mode() and convert all users accordingly. * Remove no longer needed ide_pio_data_t. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add ide_pio_cycle_time() helper. * Use it in ali14xx/ht6560b/qd65xx/cmd64{0,x}/sl82c105 and pmac host drivers (previously cycle time given by the device was only used for "pio" == 255). * Remove no longer needed ide_pio_data_t.cycle_time field. v2: * Fix "ata_" prefix (Noticed by Jeff). Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 10 5月, 2007 1 次提交
-
-
* create_proc_ide_interfaces() tries to add /proc entries for every probed and initialized IDE port, replace it by ide_proc_register_port() which does it only for the given port (also rename destroy_proc_ide_interface() to ide_proc_unregister_port() for consistency) * convert {create,destroy}_proc_ide_interface[s]() users to use new functions * pmac driver depended on proc_ide_create() to add /proc port entries, fix it * au1xxx-ide, swarm and cs5520 drivers depended indirectly on ide-generic driver (CONFIG_IDE_GENERIC=y) to add port /proc entries, fix them * there is now no need to add /proc entries for IDE ports in proc_ide_create() so don't do it * proc_ide_create() needs now to be called before drivers are probed - fix it, while at it make proc_ide_create() create /proc "ide" directory Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 04 3月, 2007 2 次提交
-
-
Legacy IDE VLB host drivers didn't check for "probe" options when compiled as modules, which was obviously wrong as we don't want module to poke at random I/O ports by simply loading it. Fix it by adding "probe" module param to legacy IDE VLB host drivers. v2: * don't obsolete old "ide0=dtc2278/ht6560b/qd65xx/ali14xx/umc8672" IDE driver options yet (per Alan Cox's request) and enhance documentation Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 17 2月, 2007 1 次提交
-
-
This results in smaller/faster/simpler code and allows future optimizations. Also remove no longer needed ide[_mm]_{inl,outl}() and ide_hwif_t.{INL,OUTL}. v2: * updated for scc_pata Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-