When checking whatever the current netdev is the bond master interface,
use kernel API netif_is_bond_master() instead of hardcoding the check.
No functionality is changed.
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

SGID attributes are not used during OPA to IB GID conversion.
Therefore don't query it.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Failure in XRCD FW deallocation command leaves memory leaked and
returns error to the user which he can't do anything about it.

This patch changes behavior to always free memory and always return
success to the user.

Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The ib_write_umad() is protected by taking the umad file mutex.
However, it accesses file->port->ib_dev -- which is protected only by the
port's mutex (field file_mutex).

The ib_umad_remove_one() calls ib_umad_kill_port() which sets
port->ib_dev to NULL under the port mutex (NOT the file mutex).
It then sets the mad agent to "dead" under the umad file mutex.

This is a race condition -- because there is a window where
port->ib_dev is NULL, while the agent is not "dead".

As a result, we saw stack traces like:

[16490.678059] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0
[16490.678246] IP: ib_umad_write+0x29c/0xa3a [ib_umad]
[16490.678333] PGD 0 P4D 0
[16490.678404] Oops: 0000 [#1] SMP PTI
[16490.678466] Modules linked in: rdma_ucm(OE) ib_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_uverbs(OE) ib_umad(OE) mlx4_en(OE) ptp pps_core mlx4_ib(OE-) ib_core(OE) mlx4_core(OE) mlx_compat
(OE) memtrack(OE) devlink mst_pciconf(OE) mst_pci(OE) netconsole nfsv3 nfs_acl nfs lockd grace fscache cfg80211 rfkill esp6_offload esp6 esp4_offload esp4 sunrpc kvm_intel kvm ppdev parport_pc irqbypass
parport joydev i2c_piix4 virtio_balloon cirrus drm_kms_helper ttm drm e1000 serio_raw virtio_pci virtio_ring virtio ata_generic pata_acpi qemu_fw_cfg [last unloaded: mlxfw]
[16490.679202] CPU: 4 PID: 3115 Comm: sminfo Tainted: G           OE   4.14.13-300.fc27.x86_64 #1
[16490.679339] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
[16490.679477] task: ffff9cf753890000 task.stack: ffffaf70c26b0000
[16490.679571] RIP: 0010:ib_umad_write+0x29c/0xa3a [ib_umad]
[16490.679664] RSP: 0018:ffffaf70c26b3d90 EFLAGS: 00010202
[16490.679747] RAX: 0000000000000010 RBX: ffff9cf75610fd80 RCX: 0000000000000000
[16490.679856] RDX: 0000000000000001 RSI: 00007ffdf2bfd714 RDI: ffff9cf6bb2a9c00

In the above trace, ib_umad_write is trying to dereference the NULL
file->port->ib_dev pointer.

Fix this by using the agent's device pointer (the device field
in struct ib_mad_agent) -- which IS protected by the umad file mutex.

Cc: <stable@vger.kernel.org> # v4.11
Fixes: 44c58487 ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types")
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The script "checkpatch.pl" pointed information out like the following.

WARNING: quoted string split across lines

Thus fix the affected source code places.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The variable "tx_desc" will be set to an appropriate pointer a bit later.
Thus omit the explicit initialisation at the beginning.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

get_user_pages() must be called with mmap_sem held, currently
it is not. In fact it is called under the user db_table->mutex.
To fix this we can convert gup to use the fast alternative,
and safely avoid taking mmap_sem, if possible. Furthermore
this is safe wrt to the mutex as other callers that take the
lock (unmap and alloc_db) are not called under mmap_sem
(hence possible deadlock).
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

There are races where can still get flush on CQEs before the QP enters
error state. This is not an error and should be treated as
debug information.
Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: NAriel Elior <Ariel.Elior@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Returning EOPNOTSUPP is problematic because it can also be
returned by the method function, and we use it in quite a few
places in drivers these days.

Instead, dedicate EPROTONOSUPPORT to indicate that the ioctl framework
is enabled but the requested object and method are not supported by
the kernel. No other case will return this code, and it lets userspace
know to fall back to write().

grep says we do not use it today in drivers/infiniband subsystem.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When Jason Gunthorpe and I became co-maintainers of the rdma tree, we
moved the official git repo location to a name neutral location.
However, that update did not make it here as well.  Fix that mistake.
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Remove myself from maintaining the qedr module as my period
of working with Cavium/Q-Logic has come to an end. I've had
a pleasure working with the community, cheers!
Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Combination of CONFIG_DEBUG_OBJECTS_RCU_HEAD=y and
CONFIG_INFINIBAND_SRPT=m produces the following build error.

ERROR: "init_rcu_head" [drivers/infiniband/ulp/srpt/ib_srpt.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1
make: *** [Makefile:1216: modules] Error 2

The reason to it that init_rcu_head() is not exported and not supposed
to be used in modules. It is needed for dynamic initialization of
statically allocated rcu_head structures.

Fixes: 795bc112 ("IB/srpt: Make it safe to use RCU for srpt_device.rch_list")
Fixes: a1125314 ("IB/srpt: Rework multi-channel support")
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Although I'm not sure this parameter is useful for regular SRP users,
setting this parameter to 1 has shown to be invaluable for testing the
block layer core, SCSI core and device mapper queue running mechanisms.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Since the SRP_LOGIN_REQ defined in the SRP standard is larger than
what fits in the RDMA/CM login request private data, introduce a new
login request format for the RDMA/CM.

Note: since srp_daemon and ibsrpdm rely on the subnet manager and
since there is no equivalent of the IB subnet manager in non-IB
networks, login has to be performed manually for non-IB networks.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Make it possible to call these two functions from a kernel module.
Note: despite their name, these two functions can be used meaningfully
independent of kobjects. A later patch will add calls to these
functions from the SRP driver because this patch series modifies the
SRP driver such that it can hold a reference to a namespace that can
last longer than the lifetime of the process through which the
namespace reference was obtained.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

rdma_dev_addr contains the net namespace pointer, while referring
bound_dev_if of the rdma_dev_addr, refer to the net namespace of
rdma_cm_id stored in rdma_dev_addr.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

cma_validate_port uses rdma_dev_addr to validate the port of the cm_id.
It needs to honor the net namespace which is setup during cm_id creation
when finding netdevice.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Pass the rdma_cm_id so that multiple fields of the rdma_dev_addr
structure can be accessed, instead of passing each individual fields.

This is needed to access some additional fields in followup patches.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

If valid netdevice is not found for RoCE, GID table should not be
searched with NULL netdevice.

Doing so causes the search routines to ignore the netdev argument and may
match the wrong GID table entry if the netdev is deleted.

Fixes: abae1b71 ("IB/cma: cma_validate_port should verify the port and netdevice")
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The kmalloc() failure to allocate memory generates enough information
and doesn't need to be accompanied by another driver print.

Fixes: d69a24e0 ("IB/mlx5: Move IB event processing onto a workqueue")
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Now that all callers who care about RoCE addresses have been
converted to use rdma_read_gids() simplify rdma_addr_get_sgid()
to only support real GID addresses.

Callers should only use it for OPA and IB transports.

The now deleted implementation for RoCE has several bugs related to IPv6
support and incorrect/inconsistent 'GID' addresses compared to the CM
paths.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Use the newly introduced rdma_read_gids() to read the SGID and DGID for
the connection which returns GID correctly for RoCE transport as well.

rdma_addr_get_dgid() for RoCE for client side connections returns MAC
address, instead of DGID.
rdma_addr_get_sgid() for RoCE doesn't return correct SGID for IPv6 and
when more than one IP address is assigned to the netdevice.

Therefore use transport agnostic rdma_read_gids() API provided by rdma_cm
module.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Make use of rdma_read_gids() API to read SGID and DGID which returns
correct GIDs for RoCE and other transports.

rdma_addr_get_dgid() for RoCE for client side connections returns MAC
address, instead of DGID.
rdma_addr_get_sgid() for RoCE doesn't return correct SGID for IPv6 and
when more than one IP address is assigned to the netdevice.

Therefore use transport agnostic rdma_read_gids() API provided by rdma_cm
module.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch introduces an API that allows legacy applications to query
GIDs for a rdma_cm_id which is used during connection establishment.

GIDs are stored and created differently for iWarp, IB and RoCE transports.
Therefore rdma_read_gids() returns GID for all the transports hiding
such internal details to caller.
It is usable for client side and server side connections.

In general continued use of GID based addressing outside of IB is
discouraged, so rdma_read_gids() should not be used by any new ULPs.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch does not change any functionality but makes srpt_cm_req_recv()
independent of the IB/CM and hence simplifies the patch that introduces
RDMA/CM support.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Introduce a union in struct srpt_rdma_ch for member variables that
depend on the type of connection manager. Avoid that error messages
report the IB/CM ID.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If a receive I/O context is removed from the wait list and
srpt_handle_new_iu() fails to allocate a send I/O context then
re-adding the receive I/O context to the wait list can cause
reordering. Avoid this by only removing a receive I/O context
from the wait list after allocating a send I/O context succeeded.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Wait list processing only occurs if the channel state >= CH_LIVE. Hence
set the channel state to CH_LIVE before triggering wait list processing
asynchronously.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Make sure that sport->mutex is not released between the duplicate
channel check, adding a channel to the channel list and performing
the sport enabled check. Avoid that srpt_disconnect_ch() can be
invoked concurrently with the ib_send_cm_rep() call by
srpt_cm_req_recv().
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The new pr_debug() statements are useful when debugging the ib_srpt
driver.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Move a mutex lock and unlock statement from srpt_close_session()
into srpt_disconnect_ch_sync(). Since the previous patch removed
the last user of the return value of that function, change the
return value of srpt_disconnect_ch_sync() into void.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Store initiator and target port ID's once per nexus instead of in each
channel data structure. This change simplifies the duplicate connection
check in srpt_cm_req_recv().
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Use the source GID as session name instead of the initiator port ID
from the SRP login request. The only functional change in this patch
is that it changes the session name shown in debug messages.

Note: the fifth argument that is passed to target_alloc_session() is
what the SCSI target core uses as key for lookups in the ACL (access
control list) information.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In multipathing setups where a target system is equipped with
dual-port HCAs it is useful to have one connection per target port
instead of one connection per target HCA. Hence move the connection
list (rch_list) from struct srpt_device into struct srpt_port.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Process connection requests that use another P_Key than the default
correctly.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch fixes a use-after-free issue for ch->release_done when
running the SRP protocol on top of the rdma_rxe driver.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The next patch will iterate over rch_list from a context from which
it is not allowed to block. Hence make rch_list RCU-safe.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch does not change any functionality but prepares for the patch
that adds RDMA_CM support by making the RDMA_CM patch much easier to
read.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Show all path record query parameters if a path record query fails.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>