- 19 6月, 2010 1 次提交
-
-
由 Gustavo Silva 提交于
This is a patch to the pcl812.c file that fixes up the following issues: ERROR: code indent should use tabs where possible x 27 WARNING: line over 80 characters x 37 WARNING: please, no space before tabs x 13 WARNING: braces {} are not necessary for single statement blocks x 2 WARNING: printk() should include KERN_ facility level x 22 WARNING: braces {} are not necessary for any arm of this statement x 5 Signed-off-by: NGustavo Silva <silvagustavo@users.sourceforge.net> Acked-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 18 6月, 2010 27 次提交
-
-
由 Lars Lindley 提交于
I fixed indentation in one place and two long lines, a space and a brace found by checkpatch.pl and fixed some long lines and whitespace around an =. Signed-off-by: NLars Lindley <lindley@coyote.org> Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ian Abbott 提交于
The dmm32at.c and comedi_bond.c comedi driver files contain an instructional comment block copied over from skel.c about how to format a driver comment block. This comment was modified in skel.c by a previous patch in this series to stop Comedi's 'dump_doc' script treating it as an actual driver comment block. There isn't any need to repeat this comment block in the other source files, so rather than modify it, this patch just removes it from those files. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ian Abbott 提交于
The Comedi team have a script 'dump_doc' to extract text from the driver comment block (starting with line 'Driver:') in (most of) the comedi driver source files. This was recently updated to allow and strip off a " * " prefix at the start of each line (well actually, it uses the perl substitution 's/^ ?\* ?//'). The skel.c file contains an instructional comment block about how to format this driver comment block, but the updated 'dump_doc' script mistakenly treats this as a valid driver comment block. This patch adds some extra whitespace to stop the instructional comment block being treated as a valid driver comment block by Comedi's 'dump_doc' script. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ian Abbott 提交于
Previous whitespace changes to das08.c removed some whitespace from a "driver comment block" that the Comedi team would like to keep. "Header continuation lines" in this comment block should be indented with whitespace. (This is after the " * " at the start of each line.) Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Gustavo Silva 提交于
This is a patch to the quatech_daqp_cs.c file that fixes up the following issues: ERROR: code indent should use tabs where possible x 1 WARNING: line over 80 characters x 1 WARNING: braces {} are not necessary for single statement blocks x 10 WARNING: printk() should include KERN_ facility level x 6 Signed-off-by: NGustavo Silva <silvagustavo@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Gustavo Silva 提交于
This is a patch to the pcmda12.c file that fixes up five printk() warning issues Signed-off-by: NGustavo Silva <silvagustavo@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Gustavo Silva 提交于
This is a patch to the pcl816.c file that fixes up the following issues: ERROR: code indent should use tabs where possible x 2 WARNING: line over 80 characters x 34 WARNING: please, no space before tabs x 1 WARNING: braces {} are not necessary for single statement blocks x 6 WARNING: printk() should include KERN_ facility level x 15 WARNING: braces {} are not necessary for any arm of this statement x 1 Signed-off-by: NGustavo Silva <silvagustavo@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Gustavo Silva 提交于
This is a patch to the pcl711.c file that fixes up printk() warning issues. Signed-off-by: NGustavo Silva <silvagustavo@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Gustavo Silva 提交于
This is a patch to the me4000.c file that fixes up the following issues: ERROR: space required after that close brace '}' x 13 ERROR: spaces required around that ':' (ctx:VxV) x 3 WARNING: line over 80 characters x 96 WARNING: braces {} are not necessary for any arm of this statement x 2 Signed-off-by: NGustavo Silva <silvagustavo@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Arun Thomas 提交于
Remove all remaining typedefs from comedi drivers Signed-off-by: NArun Thomas <arun.thomas@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Arun Thomas 提交于
Move the PCI devinit/devexit routines to the respective C source files instead of calling COMEDI_PCI_INITCLEANUP Signed-off-by: NArun Thomas <arun.thomas@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Arun Thomas 提交于
Move the init/exit routines to the respective C source files instead of calling COMEDI_INITCLEANUP Signed-off-by: NArun Thomas <arun.thomas@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Arun Thomas 提交于
Add MODULE_AUTHOR, MODULE_LICENSE, and MODULE_DESCRIPTION calls to the respective C source files instead of calling COMEDI_MODULES_MACRO Signed-off-by: NArun Thomas <arun.thomas@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Maurice Dawson 提交于
This is a patch to the ni_labpc.c file that fixes all, printk() should include KERN-facility level, warnings found by the checkpatch.pl tool Signed-off-by: NMaurice Dawson <mauricedawson2699@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Bob Beattie 提交于
This is a patch to the file am9513.h that fixes missing space warnings found by the checkpatch.pl tool. Signed-off-by: NBob Beattie <bob.beattie@ntlworld.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 John Sheehan 提交于
A patch for s626.c to fix some of the warnings reported by the checkpatch.pl tool, namely, printk() should include KERN_ facility level unnecessary whitespace before a quoted newline Signed-off-by: NJohn Sheehan <john.d.sheehan@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 John Sheehan 提交于
A patch for unioxx5.c which fixes "trailing statements should be on next line" errors raised by the chechpatch.pl tool Signed-off-by: NJohn Sheehan <john.d.sheehan@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mark Rankilor 提交于
This patch fixes some long line lengths in gsc_hpdi.c as found by the checkpatch.pl tool Signed-off-by: NMark Rankilor <reodge@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mark Rankilor 提交于
This patch cleans up some various warnings generated from checkpatch.pl Signed-off-by: NMark Rankilor <reodge@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dan Carpenter 提交于
These checks are obviously pointless because kfree() can handle null dereferences. But really the main problem is that if the pointers were null that would cause problems on the ealier lines. The dereferences would cause an oops and the _release() functions use ->priv to determine which IRQ to free. I looked into it and quite a few of the detach functions assume link->priv is non-null. It seems like we can remove these checks. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ian Abbott 提交于
Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ian Abbott 提交于
Reduce stack usage in serial_2002_open() by allocating dig_in_config, dig_out_config, chan_in_config, and chan_out_config temporary arrays using kcalloc() and freeing them when done with. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ian Abbott 提交于
The comedi device 'detach' method for the serial2002 driver has an off-by-one error in its loop for freeing data belonging to its subdevices. Fix it. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ian Abbott 提交于
The comedi device 'open' method for the serial2002 driver frees any old 'maxdata_list' and 'range_table_list' arrays belonging to a subdevice and allocates them again, but was missing checks for allocation failure. If an allocation fails, free the 'maxdata_list' and 'range_table_list' arrays for all subdevices and return an error. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ian Abbott 提交于
Some comedi drivers should return an error from their 'open' method when something goes wrong. Change the prototype of the 'open' method in 'struct comedi_device' to allow this, and change the drivers that use it. Propagate any error to the 'open' file operation. The corresponding 'close' method won't be called when the 'open' method fails, so drivers failing the 'open' need to clean up any mess they created. The dt9812 and serial2002 drivers can now return an error on 'open'. The jr3_pci driver also uses the 'open' method but doesn't fail it. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Cody Harmon 提交于
Fixed code style and placed KERN_ERR in printk statement. Signed-off-by: NCody Harmon <harmonco@engr.orst.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Samuel Richardson 提交于
This is a patch to the ni_tio.c file that fixes a brace warning found by the checkpatch.pl tool Signed-off-by: NSamuel Richardson <sam.j.richardson@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 12 6月, 2010 12 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: wimax/i2400m: fix missing endian correction read in fw loader net8139: fix a race at the end of NAPI pktgen: Fix accuracy of inter-packet delay. pkt_sched: gen_estimator: add a new lock net: deliver skbs on inactive slaves to exact matches ipv6: fix ICMP6_MIB_OUTERRORS r8169: fix mdio_read and update mdio_write according to hw specs gianfar: Revive the driver for eTSEC devices (disable timestamping) caif: fix a couple range checks phylib: Add support for the LXT973 phy. net: Print num_rx_queues imbalance warning only when there are allocated queues
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6由 Linus Torvalds 提交于
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / x86: Save/restore MISC_ENABLE register
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: The file argument for fsync() is never null Btrfs: handle ERR_PTR from posix_acl_from_xattr() Btrfs: avoid BUG when dropping root and reference in same transaction Btrfs: prohibit a operation of changing acl's mask when noacl mount option used Btrfs: should add a permission check for setfacl Btrfs: btrfs_lookup_dir_item() can return ERR_PTR Btrfs: btrfs_read_fs_root_no_name() returns ERR_PTRs Btrfs: unwind after btrfs_start_transaction() errors Btrfs: btrfs_iget() returns ERR_PTR Btrfs: handle kzalloc() failure in open_ctree() Btrfs: handle error returns from btrfs_lookup_dir_item() Btrfs: Fix BUG_ON for fs converted from extN Btrfs: Fix null dereference in relocation.c Btrfs: fix remap_file_pages error Btrfs: uninitialized data is check_path_shared() Btrfs: fix fallocate regression Btrfs: fix loop device on top of btrfs
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: clear bridge resource range if BIOS assigned bad one PCI: hotplug/cpqphp, fix NULL dereference Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/" PCI: change resource collision messages from KERN_ERR to KERN_INFO
-
由 Yinghai Lu 提交于
Yannick found that video does not work with 2.6.34. The cause of this bug was that the BIOS had assigned the wrong range to the PCI bridge above the video device. Before 2.6.34 the kernel would have shrunk the size of the bridge window, but since d65245c3 PCI: don't shrink bridge resources the kernel will avoid shrinking BIOS ranges. So zero out the old range if we fail to claim it at boot time; this will cause us to allocate a new range at startup, restoring the 2.6.34 behavior. Fixes regression https://bugzilla.kernel.org/show_bug.cgi?id=16009. Reported-by: NYannick <yannick.roehlly@free.fr> Acked-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Jiri Slaby 提交于
There are devices out there which are PCI Hot-plug controllers with compaq PCI IDs, but are not bridges, hence have pdev->subordinate NULL. But cpqphp expects the pointer to be non-NULL. Add a check to the probe function to avoid oopses like: BUG: unable to handle kernel NULL pointer dereference at 00000050 IP: [<f82e3c41>] cpqhpc_probe+0x951/0x1120 [cpqphp] *pdpt = 0000000033779001 *pde = 0000000000000000 ... The device here was: 00:0b.0 PCI Hot-plug controller [0804]: Compaq Computer Corporation PCI Hotplug Controller [0e11:a0f7] (rev 11) Subsystem: Compaq Computer Corporation Device [0e11:a2f8] Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Greg KH <greg@kroah.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Jesse Barnes 提交于
This reverts commit 75568f80. Since they're just a convenience anyway, remove these symlinks since they're causing duplicate filename errors in the wild. Acked-by: NAlex Chiang <achiang@canonical.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Bjorn Helgaas 提交于
We can often deal with PCI resource issues by moving devices around. In that case, there's no point in alarming the user with messages like these. There are many bug reports where the message itself is the only problem, e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/413419 . Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Dan Carpenter 提交于
The "file" argument for fsync is never null so we can remove this check. What drew my attention here is that 7ea80859: "drop unused dentry argument to ->fsync" introduced an unconditional dereference at the start of the function and that generated a smatch warning. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Dan Carpenter 提交于
posix_acl_from_xattr() returns both ERR_PTRs and null, but it's OK to pass null values to set_cached_acl() Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Sage Weil 提交于
If btrfs_ioctl_snap_destroy() deletes a snapshot but finishes with end_transaction(), the cleaner kthread may come in and drop the root in the same transaction. If that's the case, the root's refs still == 1 in the tree when btrfs_del_root() deletes the item, because commit_fs_roots() hasn't updated it yet (that happens during the commit). This wasn't a problem before only because btrfs_ioctl_snap_destroy() would commit the transaction before dropping the dentry reference, so the dead root wouldn't get queued up until after the fs root item was updated in the btree. Since it is not an error to drop the root reference and the root in the same transaction, just drop the BUG_ON() in btrfs_del_root(). Signed-off-by: NSage Weil <sage@newdream.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-