Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.

Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.

swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
  board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
  run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
  this GPIO for now. This will be fixed when the PCIe driver is re-
  written as a driver. The code can't regulator_get("vdd_1v05") right
  now, because the vdd_1v05 regulator's probe gets deferred due to its
  supply being the PMIC, which gets probed after the regulator the first
  time around, and this dependency is only resolved by repeated probing,
  which happens when deferred_probe_initcall() is called, which happens
  in a late initcall, whose runtime order relative to harmony_pcie_init()
  is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>

The binding doc and dts use properties "fsl,{cd,wp}-internal" while
esdhc driver uses "fsl,{cd,wp}-controller".  Fix binding doc and dts
to get them match driver code.
Reported-by: NChris Ball <cjb@laptop.org>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Cc: <stable@vger.kernel.org>
Acked-by: NChris Ball <cjb@laptop.org>

While converting, a led has been missed leading to wrong power blue led
definition. Add it back and fix the gpio used on the power blue led.
Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

vcxio, v2v1 and v1v8 are expected to be always on, update the dtsi
for twl6030 to reflect this.

commit '86f5fc' regulator: core: Mark all DT based boards as having
full constraints) caused these to be disabled at late boot causing
OMAP4 boards (using twl6030) to lockup.
Reported-by: NKishon Vijay Abraham I <kishon@ti.com>
Reported-by: NJ Keerthy <j-keerthy@ti.com>
Signed-off-by: NRajendra nayak <rnayak@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Add am33xx wdt node.
Signed-off-by: NAfzal Mohammed <afzal@ti.com>
[tony@atomide.com: I messed up and produced an empty commit db27ac80 with stg apply]
Signed-off-by: NTony Lindgren <tony@atomide.com>

Add alias for gpio nodes, so that gpio driver can identify the port
number and then specify a sensible gpio base rather than using the
one dynamically allocated by gpio core.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Commit 88cde8b7 (ARM: dts: imx: update #interrupt-cells for gpio nodes)
changes gpio #interrupt-cells from 1 to 2 without updating the users.
It causes the gpio irq requesting call failing in client driver's probe
function.

Add the irq type cell for those gpio interrupt users to fix their
driver probe failure.
Reported-by: NFabio Estevam <festevam@gmail.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Since commit c7e963f6 (net/smsc911x: Add regulator support), the lan9220
device tree probe fails on imx53-ard board, because the commit makes
VDD33A and VDDVARIO supplies mandatory for the driver.

Add a fixed dummy 3V3 supplying lan9220 to fix the regression.

Cc: stable@vger.kernel.org
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Fix registers range.

Cc: stable@vger.kernel.org
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Fix registers range.

Cc: stable@vger.kernel.org
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

In order to have audio functional on mx6qsabrelite, it is necessary
to setup the IOMUX for MX6Q_PAD_GPIO_0__CCM_CLKO pins as it provides
the audio clock.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

The comment was wrongly referring to Armada 370 while the file is
related to Armada XP.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Fix serial console node and allow the board to boot again.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

It has been decided to use marvell, not mrvl, in the compatibility
property. Search & replace.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>

Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NJosh Coombs <josh.coombs@gmail.com>

Signed-off-by: NAndrew Lunn <andrew@lunn.ch>

Signed-off-by: NAndrew Lunn <andrew@lunn.ch>

Now that we have I2C support in DT, describe the LM63 in
the DT file for the iConnect.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>

Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NSimon Baatz <gmbnomis@gmail.com>

Now that the GPIO controllers have been converted over to DT,
described the gpio-keys in DT.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NSimon Baatz <gmbnomis@gmail.com>

Move description of GPIO keys on both the DNS320 and DNS325 into DT.
Signed-off-by: NJamie Lentin <jm@lentin.co.uk>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>

A lot of device setup is shared between DNS-320 and DNS-325, move the
definitions into a common include.
Signed-off-by: NJamie Lentin <jm@lentin.co.uk>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>

Replace code in board-dnskw with the equivalent devicetree bindings.
Signed-off-by: NJamie Lentin <jm@lentin.co.uk>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>

Now that we have I2C support in DT, describe the LM75 in
the DT file for the DNS325.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NJamie Lentin <jm@lentin.co.uk>

Convert boards using DT, but the old way of configuring SATA to now
use properties in there DT file.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NSimon Baatz <gmbnomis@gmail.com>

Use the device tree for the SPI driver and partition layout.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>

Add support for Buffalo Linkstation LS-XHL and LS-CHLv2 using the device
tree where possible.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>

This patch supplies the necessary DTS and supporting files to boot up
a Seagate GoFlex Net with 3.5.0-rc3.
Signed-off-by: NJoshua Coombs <josh.coombs@gmail.com>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>

The two different variants of QNAP TS devices, varying by SoC, put the
GPIO keys on different GPIO lines. Hence we need two different DT
board descriptions, which share the same board-ts219.c file.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NJason Cooper <jason@lakedaemon.net>

Add support for instantiating this driver from device tree, and add
the necassary DT information to the kirkwood.dtsi file.

This is based on previous work by Michael Walle and Jason Cooper.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NJosh Coombs <josh.coombs@gmail.com>

Add device tree support to the Orion watchdog timer, and enable its
use in the kirkwood devices using device tree.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NSebastian Hesselbarth <sebastian.hesselbarth@googlemail.com>
Tested-by: NSimon Baatz <gmbnomis@gmail.com>

The MV64XXX I2C driver needs a clock in order to calculate the baud
rate factors. So add an clk to the clk tree. Also add the base DT
properties for kirkwood devices.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>

Conflicts:
	arch/arm/mach-kirkwood/common.c

Populate the devices with auxdata to set the device names which are used by
clkdev to lookup the clocks.
Signed-off-by: NMichael Walle <micheal@walle.cc>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
---
v2: Add interrupts properties, although not used.

Both IRQ and GPIO controllers can now be represented in DT.  The IRQ
controllers are setup first, and then the GPIO controllers. Interrupts
for GPIO lines are placed directly after the main interrupts in the
interrupt space.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NSebastian Hesselbarth <sebastian.hesselbarth@googlemail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Tested-by: NJosh Coombs <josh.coombs@gmail.com>
Tested-by: NSimon Baatz <gmbnomis@gmail.com>

This was accidentally disabled by commit 2a5fdc9a "ARM: dt: tegra:
invert status=disable vs status=okay".

Cc: <stable@vger.kernel.org> # v3.5 (file is named tegra-trimslice.dts there)
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

On TrimSlice, Tegra's USB1 port may be routed to either an external micro
USB port, or an internal USB->SATA bridge for SSD or HDD. This muxing is
controlled by a GPIO. Whilst not strictly a VBUS GPIO, the TrimSlice
board files caused this GPIO to be set appropriately to enable the SATA
bridge by passing it as the VBUS GPIO to the USB driver. Echo this same
configuration in device tree to enable the SATA bridge.

An alternative might be to implement a full USB bus mux driver. However,
that seems over-complex right now.

Cc: <stable@vger.kernel.org> # v3.5 (file is named tegra-trimslice.dts there)
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

It has been decided to use marvell, not mrvl, in the compatibility
property. Search & replace.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>

Signed-off-by: NAlexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: NRoland Stigge <stigge@antcom.de>

Adding core definitions for Altera's SOCFPGA ARM platform.
Mininum support for Altera's SOCFPGA Cyclone 5 hardware.
Signed-off-by: NDinh Nguyen <dinguyen@altera.com>
Reviewed-by: NPavel Machek <pavel@denx.de>
Reviewed-by: NRob Herring <rob.herring@calxeda.com>
Reviewed-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Signed-off-by: NStefan Roese <sr@denx.de>
Signed-off-by: NShiraz Hashim <shiraz.hashim@st.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>