- 26 5月, 2018 12 次提交
-
-
由 Christoph Hellwig 提交于
Factor out two busy poll related helpers for late reuse, and remove a command that isn't very helpful, especially with the __poll_t annotations in place. Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
If we can acquire ctx_lock without spinning we can just remove our iocb from the active_reqs list, and thus complete the iocbs from the wakeup context. Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
Simple one-shot poll through the io_submit() interface. To poll for a file descriptor the application should submit an iocb of type IOCB_CMD_POLL. It will poll the fd for the events specified in the the first 32 bits of the aio_buf field of the iocb. Unlike poll or epoll without EPOLLONESHOT this interface always works in one shot mode, that is once the iocb is completed, it will have to be resubmitted. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
With the current aio code there is no need for the magic KIOCB_CANCELLED value, as a cancelation just kicks the driver to queue the completion ASAP, with all actual completion handling done in another thread. Given that both the completion path and cancelation take the context lock there is no need for magic cmpxchg loops either. If we remove iocbs from the active list after calling ->ki_cancel (but with ctx_lock still held), we can also rely on the invariant thay anything found on the list has a ->ki_cancel callback and can be cancelled, further simplifing the code. Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
No need to pass the key field to lookup_iocb to compare it with KIOCB_KEY, as we can do that right after retrieving it from userspace. Also move the KIOCB_KEY definition to aio.c as it is an internal value not used by any other place in the kernel. Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
->get_poll_head returns the waitqueue that the poll operation is going to sleep on. Note that this means we can only use a single waitqueue for the poll, unlike some current drivers that use two waitqueues for different events. But now that we have keyed wakeups and heavily use those for poll there aren't that many good reason left to keep the multiple waitqueues, and if there are any ->poll is still around, the driver just won't support aio poll. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
These abstract out calls to the poll method in preparation for changes in how we poll. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Christoph Hellwig 提交于
Use straightline code with failure handling gotos instead of a lot of nested conditionals. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
No users outside of select.c. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 24 5月, 2018 1 次提交
-
-
由 Al Viro 提交于
If io_destroy() gets to cancelling everything that can be cancelled and gets to kiocb_cancel() calling the function driver has left in ->ki_cancel, it becomes vulnerable to a race with IO completion. At that point req is already taken off the list and aio_complete() does *NOT* spin until we (in free_ioctx_users()) releases ->ctx_lock. As the result, it proceeds to kiocb_free(), freing req just it gets passed to ->ki_cancel(). Fix is simple - remove from the list after the call of kiocb_cancel(). All instances of ->ki_cancel() already have to cope with the being called with iocb still on list - that's what happens in io_cancel(2). Cc: stable@kernel.org Fixes: 0460fef2 "aio: use cancellation list lazily" Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 22 5月, 2018 10 次提交
-
-
由 Al Viro 提交于
kill_ioctx() used to have an explicit RCU delay between removing the reference from ->ioctx_table and percpu_ref_kill() dropping the refcount. At some point that delay had been removed, on the theory that percpu_ref_kill() itself contained an RCU delay. Unfortunately, that was the wrong kind of RCU delay and it didn't care about rcu_read_lock() used by lookup_ioctx(). As the result, we could get ctx freed right under lookup_ioctx(). Tejun has fixed that in a6d7cff4 ("fs/aio: Add explicit RCU grace period when freeing kioctx"); however, that fix is not enough. Suppose io_destroy() from one thread races with e.g. io_setup() from another; CPU1 removes the reference from current->mm->ioctx_table[...] just as CPU2 has picked it (under rcu_read_lock()). Then CPU1 proceeds to drop the refcount, getting it to 0 and triggering a call of free_ioctx_users(), which proceeds to drop the secondary refcount and once that reaches zero calls free_ioctx_reqs(). That does INIT_RCU_WORK(&ctx->free_rwork, free_ioctx); queue_rcu_work(system_wq, &ctx->free_rwork); and schedules freeing the whole thing after RCU delay. In the meanwhile CPU2 has gotten around to percpu_ref_get(), bumping the refcount from 0 to 1 and returned the reference to io_setup(). Tejun's fix (that queue_rcu_work() in there) guarantees that ctx won't get freed until after percpu_ref_get(). Sure, we'd increment the counter before ctx can be freed. Now we are out of rcu_read_lock() and there's nothing to stop freeing of the whole thing. Unfortunately, CPU2 assumes that since it has grabbed the reference, ctx is *NOT* going away until it gets around to dropping that reference. The fix is obvious - use percpu_ref_tryget_live() and treat failure as miss. It's not costlier than what we currently do in normal case, it's safe to call since freeing *is* delayed and it closes the race window - either lookup_ioctx() comes before percpu_ref_kill() (in which case ctx->users won't reach 0 until the caller of lookup_ioctx() drops it) or lookup_ioctx() fails, ctx->users is unaffected and caller of lookup_ioctx() doesn't see the object in question at all. Cc: stable@kernel.org Fixes: a6d7cff4 "fs/aio: Add explicit RCU grace period when freeing kioctx" Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
open file, unlink it, then use ioctl(2) to make it immutable or append only. Now close it and watch the blocks *not* freed... Immutable/append-only checks belong in ->setattr(). Note: the bug is old and backport to anything prior to 737f2e93 ("ext2: convert to use the new truncate convention") will need these checks lifted into ext2_setattr(). Cc: stable@kernel.org Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
That can (and does, on some filesystems) happen - ->mkdir() (and thus vfs_mkdir()) can legitimately leave its argument negative and just unhash it, counting upon the lookup to pick the object we'd created next time we try to look at that name. Some vfs_mkdir() callers forget about that possibility... Acked-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
That can (and does, on some filesystems) happen - ->mkdir() (and thus vfs_mkdir()) can legitimately leave its argument negative and just unhash it, counting upon the lookup to pick the object we'd created next time we try to look at that name. Some vfs_mkdir() callers forget about that possibility... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
new_sb is left uninitialized in case of early failures in kernfs_mount_ns(), and while IS_ERR(root) is true in all such cases, using IS_ERR(root) || !new_sb is not a solution - IS_ERR(root) is true in some cases when new_sb is true. Make sure new_sb is initialized (and matches the reality) in all cases and fix the condition for dropping kobj reference - we want it done precisely in those situations where the reference has not been transferred into a new super_block instance. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
make sure that info->node is initialized early, so that kernfs_kill_sb() can list_del() it safely. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Joe Perches 提交于
There's an extra C here... Fixes: 99c18ce5 ("cramfs: direct memory access support") Acked-by: NNicolas Pitre <nico@linaro.org> Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
RTFS(Documentation/filesystems/nfs/Exporting) if you try to make something exportable. Fixes: ac632f5b "befs: add NFS export support" Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Making something exportable takes more than providing ->s_export_ops. In particular, ->lookup() *MUST* use d_splice_alias() instead of d_add(). Reading Documentation/filesystems/nfs/Exporting would've been a good idea; as it is, exporting AFFS is badly (and exploitably) broken. Partially-Fixes: ed4433d7 "fs/affs: make affs exportable" Acked-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
we unlock the directory hash too early - if we are looking at secondary link and primary (in another directory) gets removed just as we unlock, we could have the old primary moved in place of the secondary, leaving us to look into freed entry (and leaving our dentry with ->d_fsdata pointing to a freed entry). Cc: stable@vger.kernel.org # 2.4.4+ Acked-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 14 5月, 2018 1 次提交
-
-
由 Al Viro 提交于
"VFS: don't keep disconnected dentries on d_anon" had a non-trivial side-effect - d_unhashed() now returns true for those dentries, making d_find_alias() skip them altogether. For most of its callers that's fine - we really want a connected alias there. However, there is a codepath where we relied upon picking such aliases if nothing else could be found - selinux delayed initialization of contexts for inodes on already mounted filesystems used to rely upon that. Cc: stable@kernel.org # f1ee6162 "VFS: don't keep disconnected dentries on d_anon" Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 12 5月, 2018 2 次提交
-
-
由 Dave Chinner 提交于
We recently had an oops reported on a 4.14 kernel in xfs_reclaim_inodes_count() where sb->s_fs_info pointed to garbage and so the m_perag_tree lookup walked into lala land. It produces an oops down this path during the failed mount: radix_tree_gang_lookup_tag+0xc4/0x130 xfs_perag_get_tag+0x37/0xf0 xfs_reclaim_inodes_count+0x32/0x40 xfs_fs_nr_cached_objects+0x11/0x20 super_cache_count+0x35/0xc0 shrink_slab.part.66+0xb1/0x370 shrink_node+0x7e/0x1a0 try_to_free_pages+0x199/0x470 __alloc_pages_slowpath+0x3a1/0xd20 __alloc_pages_nodemask+0x1c3/0x200 cache_grow_begin+0x20b/0x2e0 fallback_alloc+0x160/0x200 kmem_cache_alloc+0x111/0x4e0 The problem is that the superblock shrinker is running before the filesystem structures it depends on have been fully set up. i.e. the shrinker is registered in sget(), before ->fill_super() has been called, and the shrinker can call into the filesystem before fill_super() does it's setup work. Essentially we are exposed to both use-after-free and use-before-initialisation bugs here. To fix this, add a check for the SB_BORN flag in super_cache_count. In general, this flag is not set until ->fs_mount() completes successfully, so we know that it is set after the filesystem setup has completed. This matches the trylock_super() behaviour which will not let super_cache_scan() run if SB_BORN is not set, and hence will not allow the superblock shrinker from entering the filesystem while it is being set up or after it has failed setup and is being torn down. Cc: stable@kernel.org Signed-Off-By: NDave Chinner <dchinner@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
For anything NFS-exported we do _not_ want to unlock new inode before it has grown an alias; original set of fixes got the ordering right, but missed the nasty complication in case of lockdep being enabled - unlock_new_inode() does lockdep_annotate_inode_mutex_key(inode) which can only be done before anyone gets a chance to touch ->i_mutex. Unfortunately, flipping the order and doing unlock_new_inode() before d_instantiate() opens a window when mkdir can race with open-by-fhandle on a guessed fhandle, leading to multiple aliases for a directory inode and all the breakage that follows from that. Correct solution: a new primitive (d_instantiate_new()) combining these two in the right order - lockdep annotate, then d_instantiate(), then the rest of unlock_new_inode(). All combinations of d_instantiate() with unlock_new_inode() should be converted to that. Cc: stable@kernel.org # 2.6.29 and later Tested-by: NMike Marshall <hubcap@omnibond.com> Reviewed-by: NAndreas Dilger <adilger@dilger.ca> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 03 5月, 2018 9 次提交
-
-
由 Ilya Dryomov 提交于
Make n signed to avoid leaking the pages array if __pipe_get_pages() fails to allocate any pages. Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Ilya Dryomov 提交于
It returns -EFAULT and happens to be a helper for pipe_get_pages() whose return type is ssize_t. Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
This is the io_getevents equivalent of ppoll/pselect and allows to properly mix signals and aio completions (especially with IOCB_CMD_POLL) and atomically executes the following sequence: sigset_t origmask; pthread_sigmask(SIG_SETMASK, &sigmask, &origmask); ret = io_getevents(ctx, min_nr, nr, events, timeout); pthread_sigmask(SIG_SETMASK, &origmask, NULL); Note that unlike many other signal related calls we do not pass a sigmask size, as that would get us to 7 arguments, which aren't easily supported by the syscall infrastructure. It seems a lot less painful to just add a new syscall variant in the unlikely case we're going to increase the sigset size. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
Simple workqueue offload for now, but prepared for adding a real aio_fsync method if the need arises. Based on an earlier patch from Dave Chinner. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
Don't reference the kiocb structure from the common aio code, and move any use of it into helper specific to the read/write path. This is in preparation for aio_poll support that wants to use the space for different fields. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NJeff Moyer <jmoyer@redhat.com> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
If we release the lockdep write protection token before calling into ->write_iter and thus never access the file pointer after an -EIOCBQUEUED return from ->write_iter or ->read_iter we don't need this extra reference. Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
Instead of handcoded non-null checks always initialize ki_list to an empty list and use list_empty / list_empty_careful on it. While we're at it also error out on a double call to kiocb_set_cancel_fn instead of ignoring it. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NJeff Moyer <jmoyer@redhat.com> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
These days we don't treat sync iocbs special in the aio completion code as they never use it. Remove the old comment and BUG_ON given that the current definition of is_sync_kiocb makes it impossible to hit. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
The page size is in no way related to the aio code, and printing it in the (debug) dmesg at every boot serves no purpose. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NJeff Moyer <jmoyer@redhat.com> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
- 30 4月, 2018 4 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: "Another set of x86 related updates: - Fix the long broken x32 version of the IPC user space headers which was noticed by Arnd Bergman in course of his ongoing y2038 work. GLIBC seems to have non broken private copies of these headers so this went unnoticed. - Two microcode fixlets which address some more fallout from the recent modifications in that area: - Unconditionally save the microcode patch, which was only saved when CPU_HOTPLUG was enabled causing failures in the late loading mechanism - Make the later loader synchronization finally work under all circumstances. It was exiting early and causing timeout failures due to a missing synchronization point. - Do not use mwait_play_dead() on AMD systems to prevent excessive power consumption as the CPU cannot go into deep power states from there. - Address an annoying sparse warning due to lost type qualifiers of the vmemmap and vmalloc base address constants. - Prevent reserving crash kernel region on Xen PV as this leads to the wrong perception that crash kernels actually work there which is not the case. Xen PV has its own crash mechanism handled by the hypervisor. - Add missing TLB cpuid values to the table to make the printout on certain machines correct. - Enumerate the new CLDEMOTE instruction - Fix an incorrect SPDX identifier - Remove stale macros" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ipc: Fix x32 version of shmid64_ds and msqid64_ds x86/setup: Do not reserve a crash kernel region if booted on Xen PV x86/cpu/intel: Add missing TLB cpuid values x86/smpboot: Don't use mwait_play_dead() on AMD systems x86/mm: Make vmemmap and vmalloc base address constants unsigned long x86/vector: Remove the unused macro FPU_IRQ x86/vector: Remove the macro VECTOR_OFFSET_START x86/cpufeatures: Enumerate cldemote instruction x86/microcode: Do not exit early from __reload_late() x86/microcode/intel: Save microcode patch unconditionally x86/jailhouse: Fix incorrect SPDX identifier
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 pti fixes from Thomas Gleixner: "A set of updates for the x86/pti related code: - Preserve r8-r11 in int $0x80. r8-r11 need to be preserved, but the int$80 entry code removed that quite some time ago. Make it correct again. - A set of fixes for the Global Bit work which went into 4.17 and caused a bunch of interesting regressions: - Triggering a BUG in the page attribute code due to a missing check for early boot stage - Warnings in the page attribute code about holes in the kernel text mapping which are caused by the freeing of the init code. Handle such holes gracefully. - Reduce the amount of kernel memory which is set global to the actual text and do not incidentally overlap with data. - Disable the global bit when RANDSTRUCT is enabled as it partially defeats the hardening. - Make the page protection setup correct for vma->page_prot population again. The adjustment of the protections fell through the crack during the Global bit rework and triggers warnings on machines which do not support certain features, e.g. NX" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64/compat: Preserve r8-r11 in int $0x80 x86/pti: Filter at vma->vm_page_prot population x86/pti: Disallow global kernel text with RANDSTRUCT x86/pti: Reduce amount of kernel text allowed to be Global x86/pti: Fix boot warning from Global-bit setting x86/pti: Fix boot problems from Global-bit setting
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fixes from Thomas Gleixner: "Two fixes from the timer departement: - Fix a long standing issue in the NOHZ tick code which causes RB tree corruption, delayed timers and other malfunctions. The cause for this is code which modifies the expiry time of an enqueued hrtimer. - Revert the CLOCK_MONOTONIC/CLOCK_BOOTTIME unification due to regression reports. Seems userspace _is_ relying on the documented behaviour despite our hope that it wont" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert: Unify CLOCK_MONOTONIC and CLOCK_BOOTTIME tick/sched: Do not mess with an enqueued hrtimer
-
- 29 4月, 2018 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Thomas Gleixner: "The perf update contains the following bits: x86: - Prevent setting freeze_on_smi on PerfMon V1 CPUs to avoid #GP perf stat: - Keep the '/' event modifier separator in fallback, for example when fallbacking from 'cpu/cpu-cycles/' to user level only, where it should become 'cpu/cpu-cycles/u' and not 'cpu/cpu-cycles/:u' (Jiri Olsa) - Fix PMU events parsing rule, improving error reporting for invalid events (Jiri Olsa) - Disable write_backward and other event attributes for !group events in a group, fixing, for instance this group: '{cycles,msr/aperf/}:S' that has leader sampling (:S) and where just the 'cycles', the leader event, should have the write_backward attribute set, in this case it all fails because the PMU where 'msr/aperf/' lives doesn't accepts write_backward style sampling (Jiri Olsa) - Only fall back group read for leader (Kan Liang) - Fix core PMU alias list for x86 platform (Kan Liang) - Print out hint for mixed PMU group error (Kan Liang) - Fix duplicate PMU name for interval print (Kan Liang) Core: - Set main kernel end address properly when reading kernel and module maps (Namhyung Kim) perf mem: - Fix incorrect entries and add missing man options (Sangwon Hong) s/390: - Remove s390 specific strcmp_cpuid_cmp function (Thomas Richter) - Adapt 'perf test' case record+probe_libc_inet_pton.sh for s390 - Fix s390 undefined record__auxtrace_init() return value in 'perf record' (Thomas Richter)" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Don't enable freeze-on-smi for PerfMon V1 perf stat: Fix duplicate PMU name for interval print perf evsel: Only fall back group read for leader perf stat: Print out hint for mixed PMU group error perf pmu: Fix core PMU alias list for X86 platform perf record: Fix s390 undefined record__auxtrace_init() return value perf mem: Document incorrect and missing options perf evsel: Disable write_backward for leader sampling group events perf pmu: Fix pmu events parsing rule perf stat: Keep the / modifier separator in fallback perf test: Adapt test case record+probe_libc_inet_pton.sh for s390 perf list: Remove s390 specific strcmp_cpuid_cmp function perf machine: Set main kernel end address properly
-