Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 08 6月, 2015 12 次提交
  3. 07 6月, 2015 6 次提交
    • A
      bpf: allow programs to write to certain skb fields · d691f9e8
      由 Alexei Starovoitov 提交于 
      allow programs read/write skb->mark, tc_index fields and
((struct qdisc_skb_cb *)cb)->data.

mark and tc_index are generically useful in TC.
cb[0]-cb[4] are primarily used to pass arguments from one
program to another called via bpf_tail_call() which can
be seen in sockex3_kern.c example.

All fields of 'struct __sk_buff' are readable to socket and tc_cls_act progs.
mark, tc_index are writeable from tc_cls_act only.
cb[0]-cb[4] are writeable by both sockets and tc_cls_act.

Add verifier tests and improve sample code.
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d691f9e8
    • A
      bpf: make programs see skb->data == L2 for ingress and egress · 3431205e
      由 Alexei Starovoitov 提交于 
      eBPF programs attached to ingress and egress qdiscs see inconsistent skb->data.
For ingress L2 header is already pulled, whereas for egress it's present.
This is known to program writers which are currently forced to use
BPF_LL_OFF workaround.
Since programs don't change skb internal pointers it is safe to do
pull/push right around invocation of the program and earlier taps and
later pt->func() will not be affected.
Multiple taps via packet_rcv(), tpacket_rcv() are doing the same trick
around run_filter/BPF_PROG_RUN even if skb_shared.

This fix finally allows programs to use optimized LD_ABS/IND instructions
without BPF_LL_OFF for higher performance.
tc ingress + cls_bpf + samples/bpf/tcbpf1_kern.o
       w/o JIT   w/JIT
before  20.5     23.6 Mpps
after   21.8     26.6 Mpps

Old programs with BPF_LL_OFF will still work as-is.

We can now undo most of the earlier workaround commit:
a166151c ("bpf: fix bpf helpers to use skb->mac_header relative offsets")
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3431205e
    • E
      tcp: remove redundant checks II · 98da81a4
      由 Eric Dumazet 提交于 
      For same reasons than in commit 12e25e10 ("tcp: remove redundant
checks"), we can remove redundant checks done for timewait sockets.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      98da81a4
    • C
      fddi: print an address with %p format specifier rather than %x · 908e80d6
      由 Colin Ian King 提交于 
      The debug is printing the struct smt_header * address using
the %x format specifier. Fix it to use %p instead.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      908e80d6
    • N
      wan: dscc4: fix build warning Wunused-but-set-variable · c5726d26
      由 Nicholas Mc Guire 提交于 
      Fix:
drivers/net/wan/dscc4.c: In function 'dscc4_open':
drivers/net/wan/dscc4.c:1049:25: warning: variable 'ppriv' set but not used
[-Wunused-but-set-variable]

This has been in there unused since 1da177e4 (Linux-2.6.12-rc2) simply
remove it.
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c5726d26
    • E
      inet: add IP_BIND_ADDRESS_NO_PORT to overcome bind(0) limitations · 90c337da
      由 Eric Dumazet 提交于 
      When an application needs to force a source IP on an active TCP socket
it has to use bind(IP, port=x).

As most applications do not want to deal with already used ports, x is
often set to 0, meaning the kernel is in charge to find an available
port.
But kernel does not know yet if this socket is going to be a listener or
be connected.
It has very limited choices (no full knowledge of final 4-tuple for a
connect())

With limited ephemeral port range (about 32K ports), it is very easy to
fill the space.

This patch adds a new SOL_IP socket option, asking kernel to ignore
the 0 port provided by application in bind(IP, port=0) and only
remember the given IP address.

The port will be automatically chosen at connect() time, in a way
that allows sharing a source port as long as the 4-tuples are unique.

This new feature is available for both IPv4 and IPv6 (Thanks Neal)

Tested:

Wrote a test program and checked its behavior on IPv4 and IPv6.

strace(1) shows sequences of bind(IP=127.0.0.2, port=0) followed by
connect().
Also getsockname() show that the port is still 0 right after bind()
but properly allocated after connect().

socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 5
setsockopt(5, SOL_IP, IP_BIND_ADDRESS_NO_PORT, [1], 4) = 0
bind(5, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("127.0.0.2")}, 16) = 0
getsockname(5, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("127.0.0.2")}, [16]) = 0
connect(5, {sa_family=AF_INET, sin_port=htons(53174), sin_addr=inet_addr("127.0.0.3")}, 16) = 0
getsockname(5, {sa_family=AF_INET, sin_port=htons(38050), sin_addr=inet_addr("127.0.0.2")}, [16]) = 0

IPv6 test :

socket(PF_INET6, SOCK_STREAM, IPPROTO_IP) = 7
setsockopt(7, SOL_IP, IP_BIND_ADDRESS_NO_PORT, [1], 4) = 0
bind(7, {sa_family=AF_INET6, sin6_port=htons(0), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 28) = 0
getsockname(7, {sa_family=AF_INET6, sin6_port=htons(0), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, [28]) = 0
connect(7, {sa_family=AF_INET6, sin6_port=htons(57300), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 28) = 0
getsockname(7, {sa_family=AF_INET6, sin6_port=htons(60964), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, [28]) = 0

I was able to bind()/connect() a million concurrent IPv4 sockets,
instead of ~32000 before patch.

lpaa23:~# ulimit -n 1000010
lpaa23:~# ./bind --connect --num-flows=1000000 &
1000000 sockets

lpaa23:~# grep TCP /proc/net/sockstat
TCP: inuse 2000063 orphan 0 tw 47 alloc 2000157 mem 66

Check that a given source port is indeed used by many different
connections :

lpaa23:~# ss -t src :40000 | head -10
State      Recv-Q Send-Q   Local Address:Port          Peer Address:Port
ESTAB      0      0           127.0.0.2:40000         127.0.202.33:44983
ESTAB      0      0           127.0.0.2:40000         127.2.27.240:44983
ESTAB      0      0           127.0.0.2:40000           127.2.98.5:44983
ESTAB      0      0           127.0.0.2:40000        127.0.124.196:44983
ESTAB      0      0           127.0.0.2:40000         127.2.139.38:44983
ESTAB      0      0           127.0.0.2:40000          127.1.59.80:44983
ESTAB      0      0           127.0.0.2:40000          127.3.6.228:44983
ESTAB      0      0           127.0.0.2:40000          127.0.38.53:44983
ESTAB      0      0           127.0.0.2:40000         127.1.197.10:44983
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      90c337da
  5. 06 6月, 2015 8 次提交
  7. 05 6月, 2015 14 次提交