Rename ceph_osd_request::r_{oloc,oid} to r_base_{oloc,oid} before
introducing r_target_{oloc,oid} needed for redirects.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Overwrite ceph_osd_request::r_oloc.pool with read_tier for read ops and
write_tier for write and read+write ops (aka basic tiering support).
{read,write}_tier are part of pg_pool_t since v9.  This commit bumps
our pg_pool_t decode compat version from v7 to v9, all new fields
except for {read,write}_tier are ignored.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Switch ceph_calc_ceph_pg() to new oloc and oid abstractions and rename
it to ceph_oloc_oid_to_pg() to make its purpose more clear.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

In preparation for tiering support, which would require having two
(base and target) object names for each osd request and also copying
those names around, introduce struct ceph_object_id (oid) and a couple
helpers to facilitate those copies and encapsulate the fact that object
name is not necessarily a NUL-terminated string.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

In preparation for adding oid abstraction, rename MAX_OBJ_NAME_SIZE to
CEPH_MAX_OID_NAME_LEN.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Instead of relying on pool fields in ceph_file_layout (for mapping) and
ceph_pg (for enconding), start using ceph_object_locator (oloc)
abstraction.  Note that userspace oloc currently consists of pool, key,
nspace and hash fields, while this one contains only a pool.  This is
OK, because at this point we only send (i.e. encode) olocs and never
have to receive (i.e. decode) them.

This makes keeping a copy of ceph_file_layout in every osd request
unnecessary, so ceph_osd_request::r_file_layout field is nuked.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Add a missing newline to a dout() in __reset_osd().
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>

The check that makes sure that we have enough memory allocated to read
in the entire header of the message in question is currently busted.
It compares front_len of the incoming message with iov_len field of
ceph_msg::front structure, which is used primarily to indicate the
amount of data already read in, and not the size of the allocated
buffer.  Under certain conditions (e.g. a short read from a socket
followed by that socket's shutdown and owning ceph_connection reset)
this results in a warning similar to

[85688.975866] libceph: get_reply front 198 > preallocated 122 (4#0)

and, through another bug, leads to forever hung tasks and forced
reboots.  Fix this by comparing front_len with front_alloc_len field of
struct ceph_msg, which stores the actual size of the buffer.

Fixes: http://tracker.ceph.com/issues/5425Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Rename front local variable to front_len in get_reply() to make its
purpose more clear.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

With the current full handling, there is a race between osds and
clients getting the first map marked full. If the osd wins, it will
return -ENOSPC to any writes, but the client may already have writes
in flight. This results in the client getting the error and
propagating it up the stack. For rbd, the block layer turns this into
EIO, which can cause corruption in filesystems above it.

To avoid this race, osds are being changed to drop writes that came
from clients with an osdmap older than the last osdmap marked full.
In order for this to work, clients must resend all writes after they
encounter a full -> not full transition in the osdmap. osds will wait
for an updated map instead of processing a request from a client with
a newer map, so resent writes will not be dropped by the osd unless
there is another not full -> full transition.

This approach requires both osds and clients to be fixed to avoid the
race. Old clients talking to osds with this fix may hang instead of
returning EIO and potentially corrupting an fs. New clients talking to
old osds have the same behavior as before if they encounter this race.

Fixes: http://tracker.ceph.com/issues/6938Reviewed-by: NSage Weil <sage@inktank.com>
Signed-off-by: NJosh Durgin <josh.durgin@inktank.com>

The PAUSEWR and PAUSERD flags are meant to stop the cluster from
processing writes and reads, respectively. The FULL flag is set when
the cluster determines that it is out of space, and will no longer
process writes.  PAUSEWR and PAUSERD are purely client-side settings
already implemented in userspace clients. The osd does nothing special
with these flags.

When the FULL flag is set, however, the osd responds to all writes
with -ENOSPC. For cephfs, this makes sense, but for rbd the block
layer translates this into EIO.  If a cluster goes from full to
non-full quickly, a filesystem on top of rbd will not behave well,
since some writes succeed while others get EIO.

Fix this by blocking any writes when the FULL flag is set in the osd
client. This is the same strategy used by userspace, so apply it by
default.  A follow-on patch makes this configurable.

__map_request() is called to re-target osd requests in case the
available osds changed.  Add a paused field to a ceph_osd_request, and
set it whenever an appropriate osd map flag is set.  Avoid queueing
paused requests in __map_request(), but force them to be resent if
they become unpaused.

Also subscribe to the next osd map from the monitor if any of these
flags are set, so paused requests can be unblocked as soon as
possible.

Fixes: http://tracker.ceph.com/issues/6079Reviewed-by: NSage Weil <sage@inktank.com>
Signed-off-by: NJosh Durgin <josh.durgin@inktank.com>

Wake up possible waiters, invoke the call back if any, unregister the request
Signed-off-by: NLi Wang <liwang@ubuntukylin.com>
Signed-off-by: NYunchuan Wen <yunchuanwen@ubuntukylin.com>
Signed-off-by: NSage Weil <sage@inktank.com>

Without a way to flush the osd client's notify workqueue, a watch
event that is unregistered could continue receiving callbacks
indefinitely.

Unregistering the event simply means no new notifies are added to the
queue, but there may still be events in the queue that will call the
watch callback for the event. If the queue is flushed after the event
is unregistered, the caller can be sure no more watch callbacks will
occur for the canceled watch.
Signed-off-by: NJosh Durgin <josh.durgin@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

create_singlethread_workqueue() returns NULL on error, and it doesn't
return ERR_PTRs.

I tweaked the error handling a little to be consistent with earlier in
the function.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NSage Weil <sage@inktank.com>

There are two places where we read "nr_maps" if both of them are set to
zero then we would hit a NULL dereference here.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NSage Weil <sage@inktank.com>

We've tried to fix the error paths in this function before, but there
is still a hidden goto in the ceph_decode_need() macro which goes to the
wrong place.  We need to release the "req" and unlock a mutex before
returning.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NSage Weil <sage@inktank.com>

This patch implements fallocate and punch hole support for Ceph kernel client.
Signed-off-by: NLi Wang <liwang@ubuntukylin.com>
Signed-off-by: NYunchuan Wen <yunchuanwen@ubuntukylin.com>

For nofail == false request, if __map_request failed, the caller does
cleanup work, like releasing the relative pages.  It doesn't make any sense
to retry this request.

CC: stable@vger.kernel.org
Signed-off-by: NJianpeng Ma <majianpeng@gmail.com>
Reviewed-by: NSage Weil <sage@inktank.com>

We can't use !req->r_sent to check if OSD request is sent for the
first time, this is because __cancel_request() zeros req->r_sent
when OSD map changes. Rather than adding a new variable to struct
ceph_osd_request to indicate if it's sent for the first time, We
can call the unsafe callback only when unsafe OSD reply is received.
If OSD's first reply is safe, just skip calling the unsafe callback.

The purpose of unsafe callback is adding unsafe request to a list,
so that fsync(2) can wait for the safe reply. fsync(2) doesn't need
to wait for a write(2) that hasn't returned yet. So it's OK to add
request to the unsafe list when the first OSD reply is received.
(ceph_sync_write() returns after receiving the first OSD reply)
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NSage Weil <sage@inktank.com>

check the "not truncated yet" case
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NSage Weil <sage@inktank.com>

handle_reply() calls complete_request() only if the first OSD reply
has ONDISK flag.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NSage Weil <sage@inktank.com>

If an osd client response message arrives that has a front section
that's too big for the buffer set aside to receive it, a warning
gets reported and a new buffer is allocated.

The warning says nothing about which connection had the problem.
Add the peer type and number to what gets reported, to be a bit more
informative.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

When an osd request is set to linger, the osd client holds onto the
request so it can be re-submitted following certain osd map changes.
The osd client holds a reference to the request until it is
unregistered.  This is used by rbd for watch requests.

Currently, the reference is taken when the request is marked with
the linger flag.  This means that if an error occurs after that
time but before the the request completes successfully, that
reference is leaked.

There's really no reason to take the reference until the request is
registered in the the osd client's list of lingering requests, and
that only happens when the lingering (watch) request completes
successfully.

So take that reference only when it gets registered following
succesful completion, and drop it (as before) when the request
gets unregistered.  This avoids the reference problem on error
in rbd.

Rearrange ceph_osdc_unregister_linger_request() to avoid using
the request pointer after it may have been freed.

And hold an extra reference in kick_requests() while handling
a linger request that has not yet been registered, to ensure
it doesn't go away.

This resolves:
    http://tracker.ceph.com/issues/3859Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

An osd client has a red-black tree describing its osds, and
occasionally we would get crashes due to one of these trees tree
becoming corrupt somehow.

The problem turned out to be that reset_changed_osds() was being
called without protection of the osd client request mutex.  That
function would call __reset_osd() for any osd that had changed, and
__reset_osd() would call __remove_osd() for any osd with no
outstanding requests, and finally __remove_osd() would remove the
corresponding entry from the red-black tree.  Thus, the tree was
getting modified without having any lock protection, and was
vulnerable to problems due to concurrent updates.

This appears to be the only osd tree updating path that has this
problem.  It can be fairly easily fixed by moving the call up
a few lines, to just before the request mutex gets dropped
in kick_requests().

This resolves:
    http://tracker.ceph.com/issues/5043

Cc: stable@vger.kernel.org # 3.4+
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

The rbd code has a need to be able to restart an osd request that
has already been started and completed once before.  This currently
wouldn't work right because the osd client code assumes an osd
request will be started exactly once  Certain fields in a request
are never cleared and this leads to trouble if you try to reuse it.

Specifically, the r_sent, r_got_reply, and r_completed fields are
never cleared.  The r_sent field records the osd incarnation at the
time the request was sent to that osd.  If that's non-zero, the
message won't get re-mapped to a target osd properly, and won't be
put on the unsafe requests list the first time it's sent as it
should.  The r_got_reply field is used in handle_reply() to ensure
the reply to a request is processed only once.  And the r_completed
field is used for lingering requests to avoid calling the callback
function every time the osd client re-sends the request on behalf of
its initiator.

Each osd request passes through ceph_osdc_start_request() when
responsibility for the request is handed over to the osd client for
completion.  We can safely zero these three fields there each time a
request gets started.

One last related change--clear the r_linger flag when a request
is no longer registered as a linger request.

This resolves:
    http://tracker.ceph.com/issues/5026Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Create a slab cache to manage allocation of ceph_osdc_request
structures.

This resolves:
    http://tracker.ceph.com/issues/3926Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

A WATCH op includes an object version.  The version that's supplied
is incorrectly byte-swapped osd_req_op_watch_init() where it's first
assigned (it's been this way since that code was first added).

The result is that the version sent to the osd is wrong, because
that value gets byte-swapped again in osd_req_encode_op().  This
is the source of a sparse warning related to improper byte order in
the assignment.

The approach of using the version to avoid a race is deprecated
(see http://tracker.ceph.com/issues/3871), and the watch parameter
is no longer even examined by the osd.  So fix the assignment in
osd_req_op_watch_init() so it no longer does the byte swap.

This resolves:
    http://tracker.ceph.com/issues/3847Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Add the ability to provide an array of pages as outbound request
data for object class method calls.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Allow osd request ops that aren't otherwise structured (not class,
extent, or watch ops) to specify "raw" data to be used to hold
incoming data for the op.  Make use of this capability for the osd
STAT op.

Prefix the name of the private function osd_req_op_init() with "_",
and expose a new function by that (earlier) name whose purpose is to
initialize osd ops with (only) implied data.

For now we'll just support the use of a page array for an osd op
with incoming raw data.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

There are a bunch of functions defined to encapsulate getting the
address of a data field for a particular op in an osd request.
They're all defined the same way, so create a macro to take the
place of all of them.

Two of these are used outside the osd client code, so preserve them
(but convert them to use the new macro internally).  Stop exporting
the ones that aren't used elsewhere.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

In the incremental move toward supporting distinct data items in an
osd request some of the functions had "write_request" parameters to
indicate, basically, whether the data belonged to in_data or the
out_data.  Now that we maintain the data fields in the op structure
there is no need to indicate the direction, so get rid of the
"write_request" parameters.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

An osd request currently has two callbacks.  They inform the
initiator of the request when we've received confirmation for the
target osd that a request was received, and when the osd indicates
all changes described by the request are durable.

The only time the second callback is used is in the ceph file system
for a synchronous write.  There's a race that makes some handling of
this case unsafe.  This patch addresses this problem.  The error
handling for this callback is also kind of gross, and this patch
changes that as well.

In ceph_sync_write(), if a safe callback is requested we want to add
the request on the ceph inode's unsafe items list.  Because items on
this list must have their tid set (by ceph_osd_start_request()), the
request added *after* the call to that function returns.  The
problem with this is that there's a race between starting the
request and adding it to the unsafe items list; the request may
already be complete before ceph_sync_write() even begins to put it
on the list.

To address this, we change the way the "safe" callback is used.
Rather than just calling it when the request is "safe", we use it to
notify the initiator the bounds (start and end) of the period during
which the request is *unsafe*.  So the initiator gets notified just
before the request gets sent to the osd (when it is "unsafe"), and
again when it's known the results are durable (it's no longer
unsafe).  The first call will get made in __send_request(), just
before the request message gets sent to the messenger for the first
time.  That function is only called by __send_queued(), which is
always called with the osd client's request mutex held.

We then have this callback function insert the request on the ceph
inode's unsafe list when we're told the request is unsafe.  This
will avoid the race because this call will be made under protection
of the osd client's request mutex.  It also nicely groups the setup
and cleanup of the state associated with managing unsafe requests.

The name of the "safe" callback field is changed to "unsafe" to
better reflect its new purpose.  It has a Boolean "unsafe" parameter
to indicate whether the request is becoming unsafe or is now safe.
Because the "msg" parameter wasn't used, we drop that.

This resolves the original problem reportedin:
    http://tracker.ceph.com/issues/4706Reported-by: NYan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Right now the data for a method call is specified via a pointer and
length, and it's copied--along with the class and method name--into
a pagelist data item to be sent to the osd.  Instead, encode the
data in a data item separate from the class and method names.

This will allow large amounts of data to be supplied to methods
without copying.  Only rbd uses the class functionality right now,
and when it really needs this it will probably need to use a page
array rather than a page list.  But this simple implementation
demonstrates the functionality on the osd client, and that's enough
for now.

This resolves:
    http://tracker.ceph.com/issues/4104Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Change the names of the functions that put data on a pagelist to
reflect that we're adding to whatever's already there rather than
just setting it to the one thing.  Currently only one data item is
ever added to a message, but that's about to change.

This resolves:
    http://tracker.ceph.com/issues/2770Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Finally!  Convert the osd op data pointers into real structures, and
make the switch over to using them instead of having all ops share
the in and/or out data structures in the osd request.

Set up a new function to traverse the set of ops and release any
data associated with them (pages).

This and the patches leading up to it resolve:
    http://tracker.ceph.com/issues/4657Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Still using the osd request r_data_in and r_data_out pointer, but
we're basically only referring to it via the data pointers in the
osd ops.  And we're transferring that information to the request
or reply message only when the op indicates it's needed, in
osd_req_encode_op().

To avoid a forward reference, ceph_osdc_msg_data_set() was moved up
in the file.

Don't bother calling ceph_osd_data_init(), in ceph_osd_alloc(),
because the ops array will already be zeroed anyway.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This ends up being a rather large patch but what it's doing is
somewhat straightforward.

Basically, this is replacing two calls with one.  The first of the
two calls is initializing a struct ceph_osd_data with data (either a
page array, a page list, or a bio list); the second is setting an
osd request op so it associates that data with one of the op's
parameters.  In place of those two will be a single function that
initializes the op directly.

That means we sort of fan out a set of the needed functions:
    - extent ops with pages data
    - extent ops with pagelist data
    - extent ops with bio list data
and
    - class ops with page data for receiving a response

We also have define another one, but it's only used internally:
    - class ops with pagelist data for request parameters

Note that we *still* haven't gotten rid of the osd request's
r_data_in and r_data_out fields.  All the osd ops refer to them for
their data.  For now, these data fields are pointers assigned to the
appropriate r_data_* field when these new functions are called.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

All calls of ceph_osdc_start_request() are preceded (in the case of
rbd, almost) immediately by a call to ceph_osdc_build_request().

Move the build calls at the top of ceph_osdc_start_request() out of
there and into the ceph_osdc_build_request().  Nothing prevents
moving these calls to the top of ceph_osdc_build_request(), either
(and we're going to want them there in the next patch) so put them
at the top.

This and the next patch are related to:
    http://tracker.ceph.com/issues/4657Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This simply moves ceph_osdc_build_request() later in its source
file without any change.  Done as a separate patch to facilitate
review of the change in the next patch.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

An object class method is formatted using a pagelist which contains
the class name, the method name, and the data concatenated into an
osd request's outbound data.

Currently when a class op is initialized in osd_req_op_cls_init(),
the lengths of and pointers to these three items are recorded.
Later, when the op is getting formatted into the request message, a
new pagelist is created and that is when these items get copied into
the pagelist.

This patch makes it so the pagelist to hold these items is created
when the op is initialized instead.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>