__initdata should be placed between the variable name and equal
sign for the variable to be placed in the intended section.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

This patch adds support to register three(AP/CP/BT) buffered 32.768 KHz
outputs of mfd-s2mps11 with common clock framework.
Signed-off-by: NYadwinder Singh Brar <yadi.brar@samsung.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

'exynos5420_plls' is used only in this file. Make is static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

exynos5250_plls is used only in this file. Make it static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

'exynos4_plls' is used only in this file. Make it static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Fix the following sparse warning:

drivers/clk/mxs/clk-imx23.c:102:12: warning: symbol 'mx23_clocks_init' was not declared. Should it be static?
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

clk_register_composite() and clk_register_factors() return ERR_PTR on error.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Fixes a trivial typo.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

This patch adds new, Common Clock Framework-based clock driver for Samsung
S3C64xx SoCs. The driver is just added, without actually letting the
platforms use it yet, since this requires more intermediate steps.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

This patch adds support for PLL6552 and PLL6553 PLLs present on Samsung
S3C64xx SoCs.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Some platforms have read-only clock muxes that are preconfigured at
reset and cannot be changed at runtime. This patch extends mux clock
driver to allow handling such read-only muxes by adding new
CLK_MUX_READ_ONLY mux flag.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Adds the EPLL and VPLL freq table for exynos5250 SoC.
Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org>
Signed-off-by: NYadwinder Singh Brar <yadi.brar@samsung.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

While trying to get rate of "mout_vpllsrc" MUX (parent) for registering the
"fout_vpll" (child), we found get rate was failing.

So this patch moves the mout_vpllsrc MUX out of the existing common list
and registers the mout_vpllsrc MUX before the PLL registrations.
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org>
Signed-off-by: NYadwinder Singh Brar <yadi.brar@samsung.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

This patch adds set_rate and round_rate clk_ops for PLL36xx
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Reviewed-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

This patch add set_rate() and round_rate() for PLL35xx
Reviewed-by: NDoug Anderson <dianders@chromium.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NYadwinder Singh Brar <yadi.brar@samsung.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

This patch defines a common rate_table which will contain recommended p, m, s,
k values for supported rates that needs to be changed for changing
corresponding PLL's rate.
Reviewed-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NYadwinder Singh Brar <yadi.brar@samsung.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

This patch removes samsung_clk_register_pll35xx() and
samsung_clk_register_pll36xx() registaration functions as users migrated to
new samsung_clk_register_pll().
Signed-off-by: NYadwinder Singh Brar <yadi.brar@samsung.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

This patch migrates exynos5420 pll registeration to use common
samsung_clk_register_pll() by intialising table of PLLs and adding PLLs to
unique id list of clocks.
Signed-off-by: NYadwinder Singh Brar <yadi.brar@samsung.com>
Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

This patch migrates exynos4 pll registeration to use common
samsung_clk_register_pll() by intialising table of PLLs.
Signed-off-by: NYadwinder Singh Brar <yadi.brar@samsung.com>
Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

This patch migrates exynos5250 pll registeration to use common
samsung_clk_register_pll() by intialising table of PLLs and adding PLLs to
unique id list of clocks.
Signed-off-by: NYadwinder Singh Brar <yadi.brar@samsung.com>
Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

This patch defines a common samsung_clk_register_pll()
Since pll2550 & pll35xx and pll2650 & pll36xx have exactly same clk ops
implementation, added pll2550 and pll2650 also.
Signed-off-by: NYadwinder Singh Brar <yadi.brar@samsung.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

This patch unifies clk strutures used for PLL35xx & PLL36xx and
adding an extra member lock_reg, so that common code can be factored out.
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NYadwinder Singh Brar <yadi.brar@samsung.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Exynos5250 G2D IP requires only the gate clock. Update the
binding documentation accordingly.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Inki Dae <inki.dae@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Added clock entries for thermal management unit (TMU) for
Exynos4 SoCs.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

hdmi driver needs hdmiphy clock which is one of the parent
for hdmi mux clock. This is required while changing the parent
of mux clock.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

hdmi driver needs to change the parent of hdmi clock
frequently between pixel clock and hdmiphy clock. hdmiphy is
not stable after power on and for a short interval while changing
the phy configuration. For this duration pixel clock is used to
clock hdmi.

This patch is exposing the mux for changing parent.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

commit 79d743c1 ("clk: exynos5250: Add enum entries for divider
clock of i2s1 and i2s2") added two new clock entries. Add the clock
entry enum numbers to documentation.
Signed-off-by: NTushar Behera <tushar.behera@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Adds gate clock for G2D IP for Exynos5250 SoC.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

exynos_audss_clk_init() is used only in this file. Make it
static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Symbols referenced only in this file are made static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Symbols referenced only in this file are made static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Symbols referenced only in this file are made static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Subsequent to the cleanup in commit 3c70348c ("ARM: EXYNOS:
Remove legacy timer initialization code"), this function has no more
users. Hence remove it.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Symbols referenced only in this file are made static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

The clocks should be numbered sequentially as they are represented as
enum values in the clock driver.

Typo introduced by commit 17d4cacc ("clk: exynos5250: register
display block gate clocks to common clock framework")
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Pull ACPI video support fixes from Rafael Wysocki:
 "I'm sending a separate pull request for this as it may be somewhat
  controversial.  The breakage addressed here is not really new and the
  fixes may not satisfy all users of the affected systems, but we've had
  so much back and forth dance in this area over the last several weeks
  that I think it's time to actually make some progress.

  The source of the problem is that about a year ago we started to tell
  BIOSes that we're compatible with Windows 8, which we really need to
  do, because some systems shipping with Windows 8 are tested with it
  and nothing else, so if we tell their BIOSes that we aren't compatible
  with Windows 8, we expose our users to untested BIOS/AML code paths.

  However, as it turns out, some Windows 8-specific AML code paths are
  not tested either, because Windows 8 actually doesn't use the ACPI
  methods containing them, so if we declare Windows 8 compatibility and
  attempt to use those ACPI methods, things break.  That occurs mostly
  in the backlight support area where in particular the _BCM and _BQC
  methods are plain unusable on some systems if the OS declares Windows
  8 compatibility.

  [ The additional twist is that they actually become usable if the OS
    says it is not compatible with Windows 8, but that may cause
    problems to show up elsewhere ]

  Investigation carried out by Matthew Garrett indicates that what
  Windows 8 does about backlight is to leave backlight control up to
  individual graphics drivers.  At least there's evidence that it does
  that if the Intel graphics driver is used, so we've decided to follow
  Windows 8 in that respect and allow i915 to control backlight (Daniel
  likes that part).

  The first commit from Aaron Lu makes ACPICA export the variable from
  which we can infer whether or not the BIOS believes that we are
  compatible with Windows 8.

  The second commit from Matthew Garrett prepares the ACPI video driver
  by making it initialize the ACPI backlight even if it is not going to
  be used afterward (that is needed for backlight control to work on
  Thinkpads).

  The third commit implements the actual workaround making i915 take
  over backlight control if the firmware thinks it's dealing with
  Windows 8 and is based on the work of multiple developers, including
  Matthew Garrett, Chun-Yi Lee, Seth Forshee, and Aaron Lu.

  The final commit from Aaron Lu makes us follow Windows 8 by informing
  the firmware through the _DOS method that it should not carry out
  automatic brightness changes, so that brightness can be controlled by
  GUI.

  Hopefully, this approach will allow us to avoid using blacklists of
  systems that should not declare Windows 8 compatibility just to avoid
  backlight control problems in the future.

   - Change from Aaron Lu makes ACPICA export a variable which can be
     used by driver code to determine whether or not the BIOS believes
     that we are compatible with Windows 8.

   - Change from Matthew Garrett makes the ACPI video driver initialize
     the ACPI backlight even if it is not going to be used afterward
     (that is needed for backlight control to work on Thinkpads).

   - Fix from Rafael J Wysocki implements Windows 8 backlight support
     workaround making i915 take over bakclight control if the firmware
     thinks it's dealing with Windows 8.  Based on the work of multiple
     developers including Matthew Garrett, Chun-Yi Lee, Seth Forshee,
     and Aaron Lu.

   - Fix from Aaron Lu makes the kernel follow Windows 8 by informing
     the firmware through the _DOS method that it should not carry out
     automatic brightness changes, so that brightness can be controlled
     by GUI"

* tag 'acpi-video-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / video: no automatic brightness changes by win8-compatible firmware
  ACPI / video / i915: No ACPI backlight if firmware expects Windows 8
  ACPI / video: Always call acpi_video_init_brightness() on init
  ACPICA: expose OSI version

Pull ext[34] tmpfile bugfix from Ted Ts'o:
 "Fix regression caused by commit af51a2ac which added ->tmpfile()
  support (along with a similar fix for ext3)"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext3: fix a BUG when opening a file with O_TMPFILE flag
  ext4: fix a BUG when opening a file with O_TMPFILE flag