None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Semicolon is not necessary after the while statement.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The TPS65218 chip is a power management IC for Portable Navigation Systems
and Tablet Computing devices. It contains the following components:

 - Regulators.
 - Over Temperature warning and Shut down.

This patch adds support for tps65218 mfd device. At this time only
the regulator functionality is made available.
Signed-off-by: NKeerthy <j-keerthy@ti.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This changes the following mechanisms in the TC3589x device tree
probing path:

- Use the .of_match_table in struct device_driver to match the
  device in the device tree.
- Add matches for the proper compatible strings "toshiba,..."
  and all sub-variants, just as is done for the .id matches.
- Move over all the allocation of platform data etc to the
  tc3589x_of_probe() function and follow the pattern of passing
  a platform data pointer back, or an error pointer on error,
  as found in the STMPE driver.
- Match the new (proper) compatible strings for the GPIO and
  keypad MFD cells.
- Use of_device_is_compatible() rather than just !strcmp()
  to discover which cells to instantiate.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Expose some DSP registers which are useful for DSP users to be able to
access whilst debugging their firmware.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Expose some DSP registers which are useful for DSP users to be able to
access whilst debugging their firmware.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add of_compatible ("maxim,max14577-muic") to the mfd_cell for extcon
driver. If entry with such compatible is present in the DTS, the extcon
driver will have of_node set.

This may be useful for extcon consumers and it is documented in
bindings documentation.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

It is currently not possible to select the SA1100 or Vexpress
drivers in the MFD subsystem, because the menu for the entire
subsystem ends before these options are presented.

Move the main menu closing and the endif for HAS_IOMEM to the
end of the file so these are selectable again.

Cc: stable@vger.kernel.org
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Update the register patch based on latest evaluation of the device.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add the necessary entries required for S2MPA01 multi-function
device. While at it also convert whitespaces to tabs in core.h.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

When used 64bit compiler GCC warns as
drivers/mfd/sec-core.c:199:10: warning:
cast from pointer to integer of different size [-Wpointer-to-int-cast]
Signed-off-by: NPankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

During probe the sec-core driver allocates dummy I2C device for RTC with
i2c_new_dummy() but return value is not checked. In case of error
(i2c_new_device(): memory allocation failure or I2C address cannot be
used) this function returns NULL which is later used by
devm_regmap_init_i2c() or i2c_unregister_device().

If i2c_new_dummy() fails for RTC device, fail also the probe for main
MFD driver.

Cc: stable@vger.kernel.org
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add support for S2MPS14 PMIC device to the MFD sec-core driver.
The S2MPS14 is similar to S2MPS11 but it has fewer regulators, two
clocks instead of three and a little different registers layout.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The S2MPS11 RTC has two alarms: alarm0 and alarm1 (corresponding
interrupts are named similarly). Use consistent names for interrupts to
limit possible errors.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This patch prepares for adding support for S2MPS14 RTC driver by
selecting different regmaps for S2MPS1X/S5M876X RTC devices.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add maximum register to the regmap used by rtc-s5m driver.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is a driver for an A/D converter, which belongs into
drivers/iio/adc.
Signed-off-by: NSebastian Reichel <sre@debian.org>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Simplify reading and writing of 16 bit TWL registers in the
driver by using twl_i2c_read_u16 and twl_i2c_write_u16.
Signed-off-by: NSebastian Reichel <sre@debian.org>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Tested-by: NMarek Belisko <marek@goldelico.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Some style fixes in twl4030-madc driver.
Reported-by: NJonathan Cameron <jic23@kernel.org>
Reported-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NSebastian Reichel <sre@debian.org>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Tested-by: NMarek Belisko <marek@goldelico.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This converts twl4030-madc module to use the Industrial IO ADC
framework and adds device tree support.
Signed-off-by: NSebastian Reichel <sre@debian.org>
Tested-by: NMarek Belisko <marek@goldelico.com>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Update twl4030-madc driver to use managed resources.
Signed-off-by: NSebastian Reichel <sre@debian.org>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Tested-by: NMarek Belisko <marek@goldelico.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Use a meaningful name for the reference clocks so that it indicates the
function.

Update the OMAP4+ USB Host node as well to be in sync with the changes.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Use the proper clock name 'usbhost_120m_fck' instead of the
alias 'ehci_logic_fck'

Get rid of the 'ehci_logic_fck' alias from the OMAP3 hwmod data
as well.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Be more strict and always fail on clk_get() error.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Not all revisions have all the clocks so get the necessary clocks
based on hardware revision.

This should avoid un-necessary clk_get failure messages that were
observed earlier.

Also remove the dummy USB host clocks from the OMAP3 clock data.
These are no longer expected by the driver.

Acked-by: Mike Turquette <mturquette@linaro.org> [OMAP3 CLK data]
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Use devm_clk_get() instead of clk_get().
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Static analysis from cppcheck issued the following warning:

[drivers/mfd/omap-usb-tll.c:255]: (warning) Found calculation
  inside sizeof().

The current size calculation is not obvious and is easy to
miscomprehend, so re-work the size of the allocation based
on the size of the struct pointer and quantity to allocate.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

If CONFIG_PM_SLEEP=n:

drivers/mfd/sec-core.c:349: warning: ‘sec_pmic_suspend’ defined but not used
drivers/mfd/sec-core.c:371: warning: ‘sec_pmic_resume’ defined but not used
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

If CONFIG_PM_SLEEP=n:

drivers/mfd/max14577.c:177: warning: ‘max14577_suspend’ defined but not used
drivers/mfd/max14577.c:200: warning: ‘max14577_resume’ defined but not used
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

If we compile the TPS65217 for a 64bit architecture we receive the following
warnings:

drivers/mfd/tps65217.c: In function ‘tps65217_probe’:
drivers/mfd/tps65217.c:173:13:
  warning: cast from pointer to integer of different size
   chip_id = (unsigned int)match->data;
             ^
Signed-off-by: NLee Jones <lee.jones@linaro.org>

If we compile the WM8994 for a 64bit architecture we receive the following
warnings:

drivers/mfd/wm8994-core.c: In function ‘wm8994_i2c_probe’:
drivers/mfd/wm8994-core.c:639:19:
  warning: cast from pointer to integer of different size
    wm8994->type = (int)of_id->data;
                   ^
Signed-off-by: NLee Jones <lee.jones@linaro.org>

If we compile the MAX8998 for a 64bit architecture we receive the following
warnings:

  drivers/mfd/max8998.c: In function ‘max8998_i2c_get_driver_data’:
  drivers/mfd/max8998.c:178:10:
    warning: cast from pointer to integer of different size
     return (int)match->data;
            ^
Signed-off-by: NLee Jones <lee.jones@linaro.org>

If we compile the MAX8997 for a 64bit architecture we receive the following
warnings:

  drivers/mfd/max8997.c: In function ‘max8997_i2c_get_driver_data’:
  drivers/mfd/max8997.c:173:10:
    warning: cast from pointer to integer of different size
     return (int)match->data;
            ^
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Currently the I2C device Ids conflict for the MFD and CODEC so
cannot be both instantiated on one platform. This patch updates
the Ids and names to make them unique from each other.

It should be noted that the I2C addresses for both PMIC and CODEC
are modifiable so instantiation of the two are kept as separate
devices, rather than instantiating the CODEC from the MFD code.
Signed-off-by: NAdam Thomson <Adam.Thomson.Opensource@diasemi.com>
Acked-by: NMark Brown <broonie@linaro.org>
Signed-off-by: NMark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org

Fix up the following pointer-integer size mismatch warning in
tps65217_probe():

	drivers/mfd/tps65217.c: In function 'tps65217_probe':
	drivers/mfd/tps65217.c:173:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
	   chip_id = (unsigned int)match->data;
		     ^
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Cc: AnilKumar Ch <anilkumar@ti.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix up the following pointer-integer size mismatch warning in
max8998_i2c_get_driver_data():

	drivers/mfd/max8998.c: In function 'max8998_i2c_get_driver_data':
	drivers/mfd/max8998.c:178:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
		return (int)match->data;
		       ^
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Mark Brown <broonie@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Evaluation of revision D of WM5110 suggests updates to the register
patch for optimal performance. For the sake of clarity rev C of the chip
does not require a register patch.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

pm_runtime_get/put_sync() can sleep so don't hold spinlock while
calling them.

This patch prevents a BUG() during system suspend when
CONFIG_DEBUG_ATOMIC_SLEEP is enabled.

Bug is present in Kernel versions v3.9 onwards.
Reported-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Tested-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

If nothing more than to improve code readability.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression pdev;
@@

pci_set_power_state(pdev,
- 0
+ PCI_D0
 )
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Instead of "#if define CONFIG_OF" use "IS_ENABLED(CONFIG_OF)"
option for DT code to avoid if-deffery in code.
Signed-off-by: NManish Badarkhe <badarkhe.manish@gmail.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>