Default to physical mode on hotplug CPU kernels.  Furher simplify and clean up
the APIC initialization code.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "Li, Shaohua" <shaohua.li@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Remove now unused clustered APIC mode code.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "Li, Shaohua" <shaohua.li@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Remove clustered APIC mode.  There's little point in the use of clustered APIC
mode, broadcasting is limited to within the cluster only, and chipsets have
bugs in this area as well.  So default to physical APIC mode when the CPU
count is large, and default to logical APIC mode when the CPU count is 8 or
smaller.

(this patch only removes the use of genapic_cluster and cleans up the
resulting genapic.c file - removal of all remaining traces of clustered
mode will be done by another patch.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "Li, Shaohua" <shaohua.li@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Fix a couple of inconsistencies/problems I found while reviewing the x86_64
genapic code (when I was chasing mysterious eth0 timeouts that would only
trigger if CPU_HOTPLUG is enabled):

 - AMD systems defaulted to the slower flat-physical mode instead
   of the flat-logical mode. The only restriction on AMD systems
   is that they should not use clustered APIC mode.

 - removed the CPU hotplug hacks, switching the default for small
   systems back from phys-flat to logical-flat. The switching to logical
   flat mode on small systems fixed sporadic ethernet driver timeouts i
   was getting on a dual-core Athlon64 system:

    NETDEV WATCHDOG: eth0: transmit timed out
    eth0: Transmit timeout, status 0c 0005 c07f media 80.
    eth0: Tx queue start entry 32  dirty entry 28.
    eth0:  Tx descriptor 0 is 0008a04a. (queue head)
    eth0:  Tx descriptor 1 is 0008a04a.
    eth0:  Tx descriptor 2 is 0008a04a.
    eth0:  Tx descriptor 3 is 0008a04a.
    eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1

 - The use of '<= 8' was a bug by itself (the valid APIC ids
   for logical flat mode go from 0 to 7, not 0 to 8). The new logic
   is to use logical flat mode on both AMD and Intel systems, and
   to only switch to physical mode when logical mode cannot be used.
   If CPU hotplug is racy wrt. APIC shutdown then CPU hotplug needs
   fixing, not the whole IRQ system be made inconsistent and slowed
   down.

 - minor cleanups: simplified some code constructs

build & booted on a couple of AMD and Intel SMP systems.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "Li, Shaohua" <shaohua.li@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Obsoleted by Ingo's genapic stuff.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "Li, Shaohua" <shaohua.li@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NAndi Kleen <ak@suse.de>

This is obsoleted by new Ingo genapic patches.

Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "Li, Shaohua" <shaohua.li@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NAndi Kleen <ak@suse.de>

This is unneeded with Ingo's genapic rework.

Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NAndi Kleen <ak@suse.de>

The Marvell IDE interface on my machine would hit a BUG_ON() in
lib/iomem.c because it was calling ata_pci_init_one() specifying just a
single port on the host, but that would actually end up trying to
initialize two ports, the second one with bogus information.

This fixes "ata_pci_init_one()" so that it actually passes down the
n_ports variable that it got from the low-level driver to the host
allocation routine ("ata_host_alloc_pinfo()"), which results in the ATA
layer actually having the correct port number information.

And in order to make it all work, I also needed to fix a few places that
had incorrectly hard-coded the fact that a host always had exactly two
ports (both ata_pci_init_bmdma() and ata_request_legacy_irqs() would
just always iterate over both ports).
Acked-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For backwards compatibility, call_platform_enable_wakeup() can return 0
instead of -EIO since we aren't guaranteed to have errno defined.

Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a kvasprintf() function to complement kasprintf().

No in-tree users yet, but I have some coming up.

[akpm@linux-foundation.org: EXPORT it]
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Keir Fraser <keir@xensource.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch changes the docs and behaviour from "all states valid" to "no
states valid" if no .valid callback is assigned.  Users of pm_ops that only
need mem sleep can assign pm_valid_only_mem without any overhead, others
will require more elaborate callbacks.

Now that all users of pm_ops have a .valid callback this is a safe thing to
do and prevents things from getting messy again as they were before.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Acked-by: NPavel Machek <pavel@ucw.cz>
Looks-okay-to: Rafael J. Wysocki <rjw@sisk.pl>
Cc: <linux-pm@lists.linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Almost all users of pm_ops only support mem sleep, don't check in .valid and
don't reject any others in .prepare so users can be confused if they check
/sys/power/state, especially when new states are added (these would then
result in s-t-r although they're supposed to be something different).

This patch implements a generic pm_valid_only_mem function that is then
exported for users and puts it to use in almost all existing pm_ops.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: NPavel Machek <pavel@ucw.cz>
Cc: linux-pm@lists.linux-foundation.org
Cc: Len Brown <lenb@kernel.org>
Acked-by: NRussell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch removes the firmware disk suspend mode which is the wrong approach,
it is supposed to be used for implementing firmware-based disk suspend but
cannot actually be used for that.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Acked-by: NPavel Machek <pavel@ucw.cz>
Cc: <linux-pm@lists.linux-foundation.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Len Brown <lenb@kernel.org>
Acked-by: NRussell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch series cleans up some misconceptions about pm_ops.  Some users of
the pm_ops structure attempt to use it to stop the user from entering suspend
to disk, this, however, is not possible since the user can always use
"shutdown" in /sys/power/disk and then the pm_ops are never invoked.  Also,
platforms that don't support suspend to disk simply should not allow
configuring SOFTWARE_SUSPEND (read the help text on it, it only selects
suspend to disk and nothing else, all the other stuff depends on PM).

The pm_ops structure is actually intended to provide a way to enter
platform-defined sleep states (currently supported states are "standby" and
"mem" (suspend to ram)) and additionally (if SOFTWARE_SUSPEND is configured)
allows a platform to support a platform specific way to enter low-power mode
once everything has been saved to disk.  This is currently only used by ACPI
(S4).

This patch:

The pm_ops.pm_disk_mode is used in totally bogus ways since nobody really
seems to understand what it actually does.

This patch clarifies the pm_disk_mode description.

It also removes all the arm and sh users that think they can veto suspend to
disk via pm_ops; not so since the user can always do echo shutdown >
/sys/power/disk, they need to find a better way involving Kconfig or such.

ACPI is the only user left with a non-zero pm_disk_mode.

The patch also sets the default mode to shutdown again, but when a new pm_ops
is registered its pm_disk_mode is selected as default, that way the default
stays for ACPI where it is apparently required.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: NPavel Machek <pavel@ucw.cz>
Cc: <linux-pm@lists.linux-foundation.org>
Cc: Len Brown <lenb@kernel.org>
Acked-by: NRussell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We're getting lockdep warnings due to a post-2.6.21-rc7 bugfix.

The xattr_sem can never be taken in the manner described. Internal inodes
are protected by I_PRIVATE.  Add the appropriate annotation.

Cc: <stable@kernel.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Today's print_symbol function dumps a kernel symbol with printk.  This
patch extends the functionality of kallsyms.c so that the symbol lookup
function may be used without the printk.  This is useful for modules that
want to dump symbols elsewhere, for example, to debugfs.  I intend to use
the new function call in the GFS2 file system (which will be a separate
patch).

[akpm@linux-foundation.org: build fix]
[clameter@sgi.com: sprint_symbol should return length of string like sprintf]
Signed-off-by: NRobert Peterson <rpeterso@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: NPaulo Marques <pmarques@grupopie.com>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When allocating local ports, do not allow a bind to a port
with a specific local address when a bind to that port with
a wildcard local address already exists.

Noticed by Linus.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I accidently applied an earlier version of Eric Dumazet's patch, from
March 21st.  His version from March 30th didn't have these bugs, so
this just interdiffs to the correct patch.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (56 commits)
  ieee1394: remove garbage from Kconfig
  ieee1394: more help in Kconfig
  ieee1394: ohci1394: Fix mistake in printk message.
  ieee1394: ohci1394: remove unnecessary rcvPhyPkt bit flipping in LinkControl register
  ieee1394: ohci1394: fix cosmetic problem in error logging
  ieee1394: eth1394: send async streams at S100 on 1394b buses
  ieee1394: eth1394: fix error path in module_init
  ieee1394: eth1394: correct return codes in hard_start_xmit
  ieee1394: eth1394: hard_start_xmit is called in atomic context
  ieee1394: eth1394: some conditions are unlikely
  ieee1394: eth1394: clean up fragment_overlap
  ieee1394: eth1394: don't use alloc_etherdev
  ieee1394: eth1394: omit useless set_mac_address callback
  ieee1394: eth1394: CONFIG_INET is always defined
  ieee1394: eth1394: allow MTU bigger than 1500
  ieee1394: unexport highlevel_host_reset
  ieee1394: eth1394: contain host reset
  ieee1394: eth1394: shorter error messages
  ieee1394: eth1394: correct a memset argument
  ieee1394: eth1394: refactor .probe and .update
  ...

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid: (21 commits)
  USB HID: don't warn on idVendor == 0
  USB HID: add 'quirks' module parameter
  USB HID: add support for dynamically-created quirks
  USB HID: clarify static quirk handling as squirks
  USB HID: encapsulate quirk handling into hid-quirks.c
  USB HID: EMS USBII device needs HID_QUIRK_MULTI_INPUT
  HID: update copyright and authorship macro
  HID: introduce proper zeroing of unused bits in output reports
  USB HID: add support for WiseGroup MP-8800 Quad Joypad
  USB HID: add FF support for Logitech Force 3D Pro Joystick
  USB HID: numlock quirk for dell W7658 keyboard
  USB HID: Logitech MX3000 keyboard needs report descriptor quirk
  USB HID: extend quirk for Logitech S510 keyboard
  USB HID: usbkbd/usbmouse - handle errors when registering devices
  USB HID: add QUIRK_HIDDEV for Belkin Flip KVM
  HID: enable dead keys on a belkin wireless keyboard
  USB HID: Thustmaster firestorm dual power v1 support
  USB HID: specify explicit size for hid_blacklist.quirks
  USB HID: fix retry & reset logic
  USB HID: consolidate vendor/product ids
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  [IPV4] SNMP: Support OutMcastPkts and OutBcastPkts
  [IPV4] SNMP: Support InMcastPkts and InBcastPkts
  [IPV4] SNMP: Support InTruncatedPkts
  [IPV4] SNMP: Support InNoRoutes
  [SNMP]: Add definitions for {In,Out}BcastPkts
  [TCP] FRTO: RFC4138 allows Nagle override when new data must be sent
  [TCP] FRTO: Delay skb available check until it's mandatory
  [XFRM]: Restrict upper layer information by bundle.
  [TCP]: Catch skb with S+L bugs earlier
  [PATCH] INET : IPV4 UDP lookups converted to a 2 pass algo
  [L2TP]: Add the ability to autoload a pppox protocol module.
  [SKB]: Introduce skb_queue_walk_safe()
  [AF_IUCV/IUCV]: smp_call_function deadlock
  [IPV6]: Fix slab corruption running ip6sic
  [TCP]: Update references in two old comments
  [XFRM]: Export SPD info
  [IPV6]: Track device renames in snmp6.
  [SCTP]: Fix sctp_getsockopt_local_addrs_old() to use local storage.
  [NET]: Remove NETIF_F_INTERNAL_STATS, default to internal stats.
  [NETPOLL]: Remove CONFIG_NETPOLL_RX
  ...

* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block:
  [PATCH] elevator: elv_list_lock does not need irq disabling
  [BLOCK] Don't pin lots of memory in mempools
  cfq-iosched: speedup cic rb lookup
  ll_rw_blk: add io_context private pointer
  cfq-iosched: get rid of cfqq hash
  cfq-iosched: tighten queue request overlap condition
  cfq-iosched: improve sync vs async workloads
  cfq-iosched: never allow an async queue idling
  cfq-iosched: get rid of ->dispatch_slice
  cfq-iosched: don't pass unused preemption variable around
  cfq-iosched: get rid of ->cur_rr and ->cfq_list
  cfq-iosched: slice offset should take ioprio into account
  [PATCH] cfq-iosched: style cleanups and comments
  cfq-iosched: sort IDLE queues into the rbtree
  cfq-iosched: sort RT queues into the rbtree
  [PATCH] cfq-iosched: speed up rbtree handling
  cfq-iosched: rework the whole round-robin list concept
  cfq-iosched: minor updates
  cfq-iosched: development update
  cfq-iosched: improve preemption for cooperating tasks

* 'for-2.6.22' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (255 commits)
  [POWERPC] Remove dev_dbg redefinition in drivers/ps3/vuart.c
  [POWERPC] remove kernel module option for booke wdt
  [POWERPC] Avoid putting cpu node twice
  [POWERPC] Spinlock initializer cleanup
  [POWERPC] ppc4xx_sgdma needs dma-mapping.h
  [POWERPC] arch/powerpc/sysdev/timer.c build fix
  [POWERPC] get_property cleanups
  [POWERPC] Remove the unused HTDMSOUND driver
  [POWERPC] cell: cbe_cpufreq cleanup and crash fix
  [POWERPC] Declare enable_kernel_spe in a header
  [POWERPC] Add dt_xlate_addr() to bootwrapper
  [POWERPC] bootwrapper: CONFIG_ -> CONFIG_DEVICE_TREE
  [POWERPC] Don't define a custom bd_t for Xilixn Virtex based boards.
  [POWERPC] Add sane defaults for Xilinx EDK generated xparameters files
  [POWERPC] Add uartlite boot console driver for the zImage wrapper
  [POWERPC] Stop using ppc_sys for Xilinx Virtex boards
  [POWERPC] New registration for common Xilinx Virtex ppc405 platform devices
  [POWERPC] Merge common virtex header files
  [POWERPC] Rework Kconfig dependancies for Xilinx Virtex ppc405 platform
  [POWERPC] Clean up cpufreq Kconfig dependencies
  ...

A transmitted IP multicast datagram should be counted as OutMcastPkts.
By the same token, a transmitted IP broadcast datagram should be
counted as OutBcastPkts.
Signed-off-by: NMitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A received IP multicast datagram should be counted as InMcastPkts.
By the same token, a received IP broadcast datagram should be
counted as InBcastPkts.
Signed-off-by: NMitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

An IP datagram which is being discarded because the datagram frame
didn't carry enough data should be counted as InTruncatedPkts.
Signed-off-by: NMitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

An IP datagram which is being discarded because of no routes in the
forwarding path should be counted as InNoRoutes.
Signed-off-by: NMitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The updated IP-MIB RFC (RFC4293) specifys new objects, InBcastPkts
and OutBcastPkts. This adds definitions for them.
Signed-off-by: NMitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a corner case where less than MSS sized new data thingie
is awaiting in the send queue. For F-RTO to work correctly, a
new data segment must be sent at certain point or F-RTO cannot
be used at all. RFC4138 allows overriding of Nagle at that
point.

Implementation uses frto_counter states 2 and 3 to distinguish
when Nagle override is needed.
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No new data is needed until the first ACK comes, so no need to check
for application limitedness until then.
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On MIPv6 usage, XFRM sub policy is enabled.
When main (IPsec) and sub (MIPv6) policy selectors have the same
address set but different upper layer information (i.e. protocol
number and its ports or type/code), multiple bundle should be created.
However, currently we have issue to use the same bundle created for
the first time with all flows covered by the case.

It is useful for the bundle to have the upper layer information
to be restructured correctly if it does not match with the flow.

1. Bundle was created by two policies
Selector from another policy is added to xfrm_dst.
If the flow does not match the selector, it goes to slow path to
restructure new bundle by single policy.

2. Bundle was created by one policy
Flow cache is added to xfrm_dst as originated one. If the flow does
not match the cache, it goes to slow path to try searching another
policy.
Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

SACKED_ACKED and LOST are mutually exclusive with SACK, thus
having their sum larger than packets_out is bug with SACK.
Eventually these bugs trigger traps in the tcp_clean_rtx_queue
with SACK but it's much more informative to do this here.

Non-SACK TCP, however, could get more than packets_out duplicate
ACKs which each increment sacked_out, so it makes sense to do
this kind of limitting for non-SACK TCP but not for SACK enabled
one. Perhaps the author had the opposite in mind but did the
logic accidently wrong way around? Anyway, the sacked_out
incrementer code for non-SACK already deals this issue before
calling sync_left_out so this trapping can be done
unconditionally.
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some people want to have many UDP sockets, binded to a single port but
many different addresses. We currently hash all those sockets into a
single chain.  Processing of incoming packets is very expensive,
because the whole chain must be examined to find the best match.

I chose in this patch to hash UDP sockets with a hash function that
take into account both their port number and address : This has a
drawback because we need two lookups : one with a given address, one
with a wildcard (null) address.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch allows a name "pppox-proto-nnn" to be used in modprobe.conf
to autoload a PPPoX protocol nnn.
Signed-off-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's never grabbed from irq context, so just make it plain spin_lock().
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Currently we scale the mempool sizes depending on memory installed
in the machine, except for the bio pool itself which sits at a fixed
256 entry pre-allocation.

There's really no point in "optimizing" this OOM path, we just need
enough preallocated to make progress. A single unit is enough, lets
scale it down to 2 just to be on the safe side.

This patch saves ~150kb of pinned kernel memory on a 32-bit box.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This patch provides a method for walking skb lists while inserting or
removing skbs from the list.
Signed-off-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>