- 27 8月, 2009 6 次提交
-
-
由 Benjamin Herrenschmidt 提交于
-
由 Gautham R Shenoy 提交于
Time time taken for a single cpu online operation on a pseries machine is as follows: Dedicated LPAR (POWER6): ~220ms. Shared LPAR (POWER5) : ~240ms. Of this time, approximately 200ms is taken up by __cpu_up(). This is because we poll every 200ms to check if the new cpu has notified it's presence through the cpu_callin_map. We repeat this operation until the new cpu sets the value in cpu_callin_map or 5 seconds elapse, whichever comes earlier. However, using completion_structs instead of polling loops, the time taken by the new processor to indicate it's presence has found to be less than 1ms on pseries. This method however may not work on all powerpc platforms due to the time-base synchronization code. Keeping this in mind, we could reduce msleep polling interval from 200ms to 1ms while retaining the 5 second timeout. With this, the time taken for a cpu online operation changes as follows: Dedicated LPAR (POWER6): 20-25ms. Shared LPAR (POWER5) : 60-80ms. In both these cases, it was found that the code polls through the loop only once indicating that 1ms is a reasonable value, atleast on pseries. The code needs testing on other powerpc platforms. Signed-off-by: NGautham R Shenoy <ego@in.ibm.com> Acked-by: NJoel Schopp <jschopp@austin.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Bastian Blank 提交于
On Thu, Aug 13, 2009 at 04:14:58PM +1000, Benjamin Herrenschmidt wrote: > On Tue, 2009-08-11 at 11:39 +0200, Bastian Blank wrote: > > This patch just disables this driver on SMP kernels, as it is obviously > > not supported. > Why not remove the #error instead ? :-) I don't think it's still > meaningful, especially since we use the timebase for delays nowadays > which doesn't depend on the CPU frequency... Your call. Take this one: The build of a PowerMac 32bit kernel currently fails with error: #warning "WARNING, CPUFREQ not recommended on SMP kernels" Thie patch removes the not longer applicable SMP warning from the PowerMac cpufreq code. Signed-off-by: NBastian Blank <waldi@debian.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Josh Boyer 提交于
The ptrace POKETEXT interface allows a process to modify the text pages of a child process being ptraced, usually to insert breakpoints via trap instructions. The kernel eventually calls copy_to_user_page, which in turn calls __flush_icache_range to invalidate the icache lines for the child process. However, this function does not work on 44x due to the icache being virtually indexed. This was noticed by a breakpoint being triggered after it had been cleared by ltrace on a 440EPx board. The convenient solution is to do a flash invalidate of the icache in the __flush_icache_range function. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
This is an attempt at cleaning up a bit the way we handle execute permission on powerpc. _PAGE_HWEXEC is gone, _PAGE_EXEC is now only defined by CPUs that can do something with it, and the myriad of #ifdef's in the I$/D$ coherency code is reduced to 2 cases that hopefully should cover everything. The logic on BookE is a little bit different than what it was though not by much. Since now, _PAGE_EXEC will be set by the generic code for executable pages, we need to filter out if they are unclean and recover it. However, I don't expect the code to be more bloated than it already was in that area due to that change. I could boast that this brings proper enforcing of per-page execute permissions to all BookE and 40x but in fact, we've had that now for some time as a side effect of my previous rework in that area (and I didn't even know it :-) We would only enable execute permission if the page was cache clean and we would only cache clean it if we took and exec fault. Since we now enforce that the later only work if VM_EXEC is part of the VMA flags, we de-fact already enforce per-page execute permissions... Unless I missed something Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
-
- 26 8月, 2009 15 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: irda/sa1100_ir: fix broken netdev_ops conversion irda/au1k_ir: fix broken netdev_ops conversion pkt_sched: Fix bogon in tasklet_hrtimer changes.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Validate linear D-TLB misses. sparc64: Update defconfig. sparc32: Update defconfig. sparc32: Kill trap table freeing code. sparc: sys32.S incorrect compat-layer splice() system call sparc: Use page_fault_out_of_memory() for VM_FAULT_OOM. sparc64: Sign extend length arg to truncate syscalls when compat. sparc: Fix cleanup crash in bbc_envctrl_cleanup()
-
由 Alexander Beregalov 提交于
This patch is based on commit d2f3ad4c (pxaficp-ir: remove incorrect net_device_ops). Do the same for sa1100_ir. Untested. Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Beregalov 提交于
This patch is based on commit d2f3ad4c (pxaficp-ir: remove incorrect net_device_ops). Do the same for au1k_ir. Untested. Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Barkowski 提交于
This avoids having a short glitch if the desired initial value is not the same as what was previously in the data register. Signed-off-by: NMichael Barkowski <michaelbarkowski@ruggedcom.com> Acked-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 David S. Miller 提交于
When page alloc debugging is not enabled, we essentially accept any virtual address for linear kernel TLB misses. But with kgdb, kernel address probing, and other facilities we can try to access arbitrary crap. So, make sure the address we miss on will translate to physical memory that actually exists. In order to make this work we have to embed the valid address bitmap into the kernel image. And in order to make that less expensive we make an adjustment, in that the max physical memory address is decreased to "1 << 41", even on the chips that support a 42-bit physical address space. We can do this because bit 41 indicates "I/O space" and thus covers non-memory ranges. The result of this is that: 1) kpte_linear_bitmap shrinks from 2K to 1K in size 2) we need 64K more for the valid address bitmap We can't let the valid address bitmap be dynamically allocated once we start using it to validate TLB misses, otherwise we have crazy issues to deal with wrt. recursive TLB misses and such. If we're in a TLB miss it could be the deepest trap level that's legal inside of the cpu. So if we TLB miss referencing the bitmap, the cpu will be out of trap levels and enter RED state. To guard against out-of-range accesses to the bitmap, we have to check to make sure no bits in the physical address above bit 40 are set. We could export and use last_valid_pfn for this check, but that's just an unnecessary extra memory reference. On the plus side of all this, since we load all of these translations into the special 4MB mapping TSB, and we check the TSB first for TLB misses, there should be absolutely no real cost for these new checks in the TLB miss path. Reported-by: heyongli@gmail.com Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf_counter: Fix typo in read() output generation perf tools: Check perf.data owner
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: dma-debug: Fix check_unmap null pointer dereference
-
由 Linus Torvalds 提交于
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clockevent: Prevent dead lock on clockevents_lock timers: Drop write permission on /proc/timer_list
-
由 Linus Torvalds 提交于
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing: Fix too large stack usage in do_one_initcall() tracing: handle broken names in ftrace filter ftrace: Unify effect of writing to trace_options and option/*
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Fix build with older binutils and consolidate linker script x86: Fix an incorrect argument of reserve_bootmem() x86: add vmlinux.lds to targets in arch/x86/boot/compressed/Makefile xen: rearrange things to fix stackprotector x86: make sure load_percpu_segment has no stackprotector i386: Fix section mismatches for init code with !HOTPLUG_CPU x86, pat: Allow ISA memory range uncacheable mapping requests
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: ext3: Improve error message that changing journaling mode on remount is not possible ext3: Update Kconfig description of EXT3_DEFAULTS_TO_ORDERED
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'fix/misc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: sound: pcm_lib: fix unsorted list constraint handling sound: vx222: fix input level control range check ALSA: ali5451: fix timeout handling in snd_ali_{codecs,timer}_ready()
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] ar7_wdt: fix path to ar7-specific headers
-
由 Linus Torvalds 提交于
When I rewrote tty ldisc code to use proper reference counts (commits 65b77046 and cbe9352f) in order to avoid a race with hangup, the test-program that Eric Biederman used to trigger the original problem seems to have exposed another long-standing bug: the hangup code did the 'tty_ldisc_halt()' to stop any buffer flushing activity, but unlike the other call sites it never actually flushed any pending work. As a result, if you get just the right timing, the pending work may be just about to execute (ie the timer has already triggered and thus cancel_delayed_work() was a no-op), when we then re-initialize the ldisc from under it. That, in turn, results in various random problems, usually seen as a NULL pointer dereference in run_timer_softirq() or a BUG() in worker_thread (but it can be almost anything). Fix it by adding the required 'flush_scheduled_work()' after doing the tty_ldisc_halt() (this also requires us to move the ldisc halt to before taking the ldisc mutex in order to avoid a deadlock with the workqueue executing do_tty_hangup, which requires the mutex). The locking should be cleaned up one day (the requirement to do this outside the ldisc_mutex is very annoying, and weakens the lock), but that's a larger and separate undertaking. Reported-by: NEric W. Biederman <ebiederm@xmission.com> Tested-by: NXiaotian Feng <xtfeng@gmail.com> Tested-by: NYanmin Zhang <yanmin_zhang@linux.intel.com> Tested-by: NDave Young <hidave.darkstar@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 8月, 2009 19 次提交
-
-
由 Anton Vorontsov 提交于
- Add gpio-controller node for BCSR17, it is used to control USB speed and VBUS; - Add timer node for QE GTM, needed for USB host; - Add usb node itself; - Add some probing code for BCSR GPIOs. NOTE: QE USB doesn't work on prototype boards, but should work on pilot boards if specs and schematics are correct, though we don't have the pilot boards to actually test it. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
- Add usb node; - Configure pins and clocks; - Enable USB function in BCSR. The support was successfully tested using serial and ethernet gadget drivers. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
mpc8272_ads.c is using BCSR bits definitions from pq2ads.h, but according to User's Guide the bits are wrong for MPC8272ADS boards (I guess definitions from pq2ads should only be used for PQ2FADS boards). So, let's introduce our own definitions for MPC8272ADS, and don't include pq2ads.h. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
This patch simply adds sdhci node to the device tree. We specify clock-frequency manually, so that eSDHC will work without upgrading U-Boot. Though, that'll only work for default setup (1500 MHz) on new board revisions. For non-default setups, it's recommended to upgrade U-Boot, since it will fixup clock-frequency automatically. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Jan Beulich 提交于
binutils prior to 2.17 can't deal with the currently possible situation of a new segment following the per-CPU segment, but that new segment being empty - objcopy misplaces the .bss (and perhaps also the .brk) sections outside of any segment. However, the current ordering of sections really just appears to be the effect of cumulative unrelated changes; re-ordering things allows to easily guarantee that the segment following the per-CPU one is non-empty, and at once eliminates the need for the bogus data.init2 segment. Once touching this code, also use the various data section helper macros from include/asm-generic/vmlinux.lds.h. -v2: fix !SMP builds. Signed-off-by: NJan Beulich <jbeulich@novell.com> Cc: <sam@ravnborg.org> LKML-Reference: <4A94085D02000078000119A5@vpn.id2.novell.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Clemens Ladisch 提交于
snd_interval_list() expected a sorted list but did not document this, so there are drivers that give it an unsorted list. To fix this, change the algorithm to work with any list. This fixes the "Slave PCM not usable" error with USB devices that have multiple alternate settings with sample rates in decreasing order, such as the Philips Askey VC010 WebCam. http://bugzilla.kernel.org/show_bug.cgi?id=14028Reported-and-tested-by: NAndrzej <adkadk@gmail.com> Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David S. Miller 提交于
Reported by Stephen Rothwell, luckily it's harmless: net/sched/sch_api.c: In function 'qdisc_watchdog': net/sched/sch_api.c:460: warning: initialization from incompatible pointer type net/sched/sch_cbq.c: In function 'cbq_undelay': net/sched/sch_cbq.c:595: warning: initialization from incompatible pointer type Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Gortmaker 提交于
The earlier mpc8560 CPUs don't have the RSTCR at 0xe00b0 in the GUTS. The generic reboot code uses this tag to determine if it should be using the RSTCR for reboot, so remove it from the board definition. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Paul Gortmaker 提交于
Some CPU, like the MPC8560 don't have a RSTCR in the Global Utilities Block. These boards will implement their own reboot call, and not use this code, so we should only warn about the absence of the GUTS RSTCR when the default reboot code is used. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Liang Li 提交于
The existing fsl_rstcr_restart function is not applicable to the mpc8560. The Global Utilities Block on this earlier CPU doesn't have the control/reset register at 0xe00b0. This implements a board specific reset function that uses the RCR(Reset Control Register) of the sbc8560's EPLD to do a reset. Signed-off-by: NLiang Li <Liang.Li@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Paul Gortmaker 提交于
With flash partition entries in the DTS file, MTD might as well be enabled in the defconfig. In a similar vein, enable USB and enough related options (SCSI/ext2/ext3) so that a user can read and write to a generic USB flash drive as well. Also, this board only has the two default SOC UARTs, so adjust the UART config accordingly. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Liang Li 提交于
Allows interrupts to occur on the sbc834x. Currently PCI devices get assigned an incorrect IRQ and so the interrupt count never increases. This was tested with the 82546GB based dual port E1000 PCI-X NIC which uses two distinct IRQ lines on the one card. root@localhost:/root> cat /proc/interrupts | grep eth 17: 78 IPIC Level eth1 48: 27121 IPIC Level eth0 Signed-off-by: NLiang Li <liang.li@windriver.com> Signed-off-by: NYang Shi <yang.shi@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Liang Li 提交于
There is 8MB flash, 8kB EEPROM and 128MB SDRAM on the sbc834x local bus, so add a localbus node in DTS with MTD partitions. The recent U-boot commit fe613cdd4eb moves u-boot to the beginning of flash, hence the legacy label on the partition at the end of flash. Signed-off-by: NLiang Li <liang.li@windriver.com> Signed-off-by: NYang Shi <yang.shi@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Liang Li 提交于
Since only one of the SoC USB devices is brought out to a physical connector on the board, remove the 2nd (USB-DR) node from the DTS. Having it present and USB enabled will cause a hang at boot. Signed-off-by: NLiang Li <liang.li@windriver.com> Signed-off-by: NYang Shi <yang.shi@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Poonam Aggrwal 提交于
Add support for the P2020RDB reference board from Freescale. Overview of P2020RDB platform - DDR DDR2 1G - NOR Flash 16MByte - NAND Flash 32MByte - 3 Ethernet interfaces 1) etSEC1 - RGMII - connected to a 5 port Vitesse Switch(VSC7385) - Switch is memory mapped through eLBC interface(CS#2) - IRQ1 2) etSEC2 - SGMII - connected to VSC8221 - IRQ2 3) etSEC3 - RGMII - connected to VSC8641 - IRQ3 - 2 1X PCIe interfaces - SD/MMC ,USB - SPI EEPROM - Serial I2C EEPROM Signed-off-by: NPoonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
The MMUCSR is now defined as part of the Book-3E architecture so we can move it into mmu-book3e.h and add some of the additional bits defined by the architecture specs. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Heiko Schocher 提交于
- add I2C support - add FCC1 and FCC2 support Signed-off-by: NHeiko Schocher <hs@denx.de> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Trond Myklebust 提交于
Commit 76db6d95 (nfs41: add session setup to the state manager) introduces an infinite loop possibility in the NFSv4 state manager. By first checking nfs4_has_session() before clearing the NFS4CLNT_SESSION_SETUP flag, it allows for a situation where someone sets that flag, but it never gets cleared, and so the state manager loops. In fact commit c3fad1b1 (nfs41: add session reset to state manager) causes this to happen every time we get a network partition error. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Tested-by: NDaniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: ocfs2/dlm: Wait on lockres instead of erroring cancel requests ocfs2: Add missing lock name ocfs2: Don't oops in ocfs2_kill_sb on a failed mount ocfs2: release the buffer head in ocfs2_do_truncate. ocfs2: Handle quota file corruption more gracefully
-