revert c386578f ("xfrm: Let the flowcache handle its size by default.").

Once we remove flow cache, we don't have a flow cache limit anymore.
We must not allow (virtually) unlimited allocations of xfrm dst entries.
Revert back to the old xfrm dst gc limits.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

flow cache is removed in next commit.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

these drivers use tasklets or irq apis, but don't include interrupt.h.
Once flow cache is removed the implicit interrupt.h inclusion goes away
which will break the build.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Vivien Didelot says:

====================
net: dsa: mv88e6xxx: cleanup capabilities

This patch series removes the remaining capabilities as well as the
flags bitmap in the info structures. Most of them are turned into ops,
or new info members.

There is no mv88e6xxx_cap enum or bitmap flags anymore, only
mv88e6xxx_info and mv88e6xxx_ops structures.

While reviewing and documenting the related G2 registers, fix a few
inconsistencies: 88E6185 has no interrupt in G2 and 88E6390 has a POT.

Except these two adjustments, there is no functional changes.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of relying on a bitmap flag, add a new multi_chip info flag to
describe the presence of the indirect SMI access though the two device
registers 0x0 and 0x1.

All remaining capabilities and flags are now unused. Remove the
mv88e6xxx_cap enum and the info flags bitmaps.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 88E6352 family supports Energy Detect and has one bit for Sense and
one bit for periodically transmit NLP (Energy Detect+TM). The 88E6390
family adds another bit to distinguish Auto or SW wake-up. Chips
supporting EEE all have an EEE Enabled bit in the Port Status Register.

This patch adds new ops for the PHY Energy Detect accesses.

This also allows us to get rid of the MV88E6XXX_FLAG_EEE flag.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similarly to global1_addr, add a global2_addr member in the info
structure to describe the presence of the Global 2 Registers.

This allows us to get rid of the MV88E6XXX_FLAG_GLOBAL2 flag.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a pot_clear operation to clear the Priority Override Table and wrap
its call into a mv88e6xxx_pot_setup helper.

This allows us to get rid of the MV88E6XXX_FLAG_G2_POT flag.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 88E6390 family clear the Priority Override Table the same way as
88E6352, thus add MV88E6XXX_FLAG_G2_POT to MV88E6XXX_FLAGS_FAMILY_6390.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 88E6185 family only has one 16-bit register to mark the 16 802.1D
reserved multicast addresses in the range of 01:80:C2:00:00:0x as MGMT.

The 88E6352 family also has one 16-bit register to mark the 16 GARP
reserved multicast addresses in the range of 01:80:C2:00:00:2x as MGMT.

Split the existing mv88e6095 prefixed mgmt_rsvd2cpu operation into two
distinct mv88e6185 and mv88e6352 prefixed operations, and wrap its call
into a mv88e6xxx_rsvd2cpu_setup helper.

This allows us to also get rid of the MV88E6XXX_CAP_G2_MGMT_EN_* flags.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similarly to g1_irqs, add a g2_irqs member to the info structure to
indicates the presence of the Global 2 Interrupt Source and Mask
registers.

At the same time, provide helpers and document the registers since they
differ a bit between 88E6352 and 88E6390 families.

This allows us to get rid of the MV88E6XXX_FLAG_G2_INT flag.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 88E6185 family has no Global 2 Interrupt Source or Mask registers.
Remove the MV88E6XXX_FLAG_G2_INT from MV88E6XXX_FLAGS_FAMILY_6185.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove the forgotten capabilities and related flags from previous
cleanups.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MV88E6XXX_FAMILY_6321 is undefined, 88E6321's family is 88E6320,
fix this.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We don't support LED control yet, remove its register definition.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

phy.c does not need to include the DSA public header. Remove it.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Initial patches missed case with CONFIG_BPF_SYSCALL not set.

Fixes: 11393cc9 ("xdp: Add batching support to redirect map")
Fixes: 97f91a7c ("bpf: add bpf_redirect_map helper routine")
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The gpiod API checks for NULL descriptors, so there is no need to
duplicate the check in the driver.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When testing with a driver that has both native and generic redirect support:

$ sudo ./samples/bpf/xdp_redirect -N 5 6
input: 5 output: 6
ifindex 6:    4961879 pkt/s
ifindex 6:    6391319 pkt/s
ifindex 6:    6419468 pkt/s

$ sudo ./samples/bpf/xdp_redirect -S 5 6
input: 5 output: 6
ifindex 6:    1845435 pkt/s
ifindex 6:    3882850 pkt/s
ifindex 6:    3893974 pkt/s

$ sudo ./samples/bpf/xdp_redirect_map -N 5 6
input: 5 output: 6
map[0] (vports) = 4, map[1] (map) = 5, map[2] (count) = 0
ifindex 6:    2207374 pkt/s
ifindex 6:    6212869 pkt/s
ifindex 6:    6286515 pkt/s

$ sudo ./samples/bpf/xdp_redirect_map -S 5 6
input: 5 output: 6
map[0] (vports) = 4, map[1] (map) = 5, map[2] (count) = 0
ifindex 6:    5052528 pkt/s
ifindex 6:    5736631 pkt/s
ifindex 6:    5739962 pkt/s
Signed-off-by: NAndy Gospodarek <andy@greyhouse.net>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   5113	    384	      0	   5497	   1579	drivers/net/ethernet/ec_bhf.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   5177	    320	      0	   5497	   1579	drivers/net/ethernet/ec_bhf.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
    791	    336	      0	   1127	    467	net/ethernet/cadence/macb_pci.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
    855	    272	      0	   1127	    467	net/ethernet/cadence/macb_pci.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It was added for netlink mmap tx, there are no callers in the tree.
The commit also added a check for skb->head != NULL in kfree_skb path,
remove that too -- all skbs ought to have skb->head set.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

David S. Miller says:

====================
net: Remove UDP Fragmentation Offload support

This is a patch series, based upon some discussions with various
developers, that removes UFO offloading.

Very few devices support this operation, it's usefullness is
quesitonable at best, and it adds a non-trivial amount of
complexity to our data paths.

v2: Delete more code thanks to feedback from Willem.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No longer used.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rename udp{4,6}_ufo_fragment() to udp{4,6}_tunnel_segment() and only
handle tunnel segmentation.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Such packets are no longer possible.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is going away.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is going away.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is going away.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is going away.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is going away.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is going away.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is going away.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This driver doesn't actually support UFO explicitly yet
it advertises this in netdev->features.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

John Fastabend says:

====================
Implement XDP bpf_redirect

This series adds two new XDP helper routines bpf_redirect() and
bpf_redirect_map(). The first variant bpf_redirect() is meant
to be used the same way it is currently being used by the cls_bpf
classifier. An xdp packet will be redirected immediately when this
is called.

The other variant bpf_redirect_map(map, key, flags) uses a new
map type called devmap. A devmap uses integers as keys and
net_devices as values. The user provies key/ifindex pairs to
update the map with new net_devices. This provides two benefits
over the normal variant 'bpf_redirect()'. First the datapath
bpf program is abstracted away from using hard-coded ifindex
values. Allowing a single bpf program to be run any many different
environments. Second, and perhaps more important, the map enables
batching packet transmits. The map plus small driver changes
allows for batching all send requests across a NAPI poll loop.
This allows driver writers to optimize the driver xmit path
and only call expensive operations once for a batch of xdp_buffs.

The devmap was designed to support possible future work for
multicast and broadcast as follow-up patches.

To see, in more detail, how to leverage the new helpers and
map from the userspace side please review these two patches,

  xdp: sample program for new bpf_redirect helper
  xdp: bpf redirect with map sample program

Performance numbers provided by Jesper are the following, tested
using the ixgbe driver with CPU E5-1650 v4 @ 3.60GHz:

13,939,674 pkt/s = XDP_DROP without touching memory
14,290,650 pkt/s = xdp1: XDP_DROP with reading packet data
13,221,812 pkt/s = xdp2: XDP_TX   with swap mac (writes into pkt)
 7,596,576 pkt/s = xdp_redirect:    XDP_REDIRECT with swap mac (like XDP_TX)
13,058,435 pkt/s = xdp_redirect_map:XDP_REDIRECT with swap mac + devmap

A big thanks to everyone who helped with this series. Jesper
provided fixes, debugging, code review, performance benchmarks!
Daniel provided lots of useful feedback and code review. And last
but not least Andy provided useful feedback related to supporting
additional drivers, generic xdp implementation, testing, etc. Any
other feedback is welcome but I believe at this point these are
ready to be merged!

Whats left... get the rest of the drivers developers to implement
this in all the drivers.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Tested-by: NAndy Gospodarek <andy@greyhouse.net>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The BPF map devmap holds a refcnt on the net_device structure when
it is in the map. We need to do this to ensure on driver unload we
don't lose a dev reference.

However, its not very convenient to have to manually unload the map
when destroying a net device so add notifier handlers to do the cleanup
automatically. But this creates a race between update/destroy BPF
syscall and programs and the unregister netdev hook.

Unfortunately, the best I could come up with is either to live with
requiring manual removal of net devices from the map before removing
the net device OR to add a mutex in devmap to ensure the map is not
modified while we are removing a device. The fallout also requires
that BPF programs no longer update/delete the map from the BPF program
side because the mutex may sleep and this can not be done from inside
an rcu critical section.  This is not a real problem though because I
have not come up with any use cases where this is actually useful in
practice. If/when we come up with a compelling user for this we may
need to revisit this.
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For performance reasons we want to avoid updating the tail pointer in
the driver tx ring as much as possible. To accomplish this we add
batching support to the redirect path in XDP.

This adds another ndo op "xdp_flush" that is used to inform the driver
that it should bump the tail pointer on the TX ring.
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>