- 11 7月, 2008 3 次提交
-
-
由 Zhang Rui 提交于
The problem is introduced by commit 664d080c. acpi_evaluate_integer is a sleeping function, and it should not be called with spin_lock_irqsave. https://bugzilla.redhat.com/show_bug.cgi?id=451399Signed-off-by: NZhang Rui <rui.zhang@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Kai Krakow 提交于
This enables short 40-wire detection for my laptop thus enabling UDMA/100. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tejun Heo 提交于
Some BIOSen enable DIPM via _GTF which causes command timeouts under certain configuration. This didn't occur on 2.6.25 because 2.6.25 defaulted to SRST, so _GTF wasn't executed during boot probe, so ahci host reset disabled DIPM and as _GTF wasn't executed after SRST, DIPM wasn't enabled. On 2.6.26, hardreset is used during probe and after probe _GTF is executed enabling DIPM and thus the failures. This patch could theoretically disable DIPM on machines which used to have it enabled on 2.6.25 but AFAIK ahci is currently the only driver which uses SATA ACPI hierarchy (_SDD) and as the host reset would have always disabled DIPM, this shouldn't happen. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 09 7月, 2008 14 次提交
-
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6由 Linus Torvalds 提交于
* 'hotfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: SUNRPC: Fix an rpcbind breakage for the case of IPv6 lookups SUNRPC: Fix a double-free in rpcbind NFS: Fix readdir cache invalidation
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix 32bit kernels on R4k with 128 byte cache line size [MIPS] Atlas, decstation: Fix section mismatches triggered by defconfigs
-
由 Jeff Mahoney 提交于
With the removal of struct file from the xattr code, reiserfs_file_release() isn't used anymore, so the prealloc isn't discarded. This causes hangs later down the line. This patch adds it to reiserfs_delete_inode. In most cases it will be a no-op due to it already having been called, but will avoid hangs with xattrs. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Trond Myklebust 提交于
Now that rpcb_next_version has been split into an IPv4 version and an IPv6 version, we Oops when rpcb_call_async attempts to look up the IPv6-specific RPC procedure in rpcb_next_version. Fix the Oops simply by having rpcb_getport_async pass the correct RPC procedure as an argument. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
It is wrong to be freeing up the rpcbind arguments if the call to rpcb_call_async() fails, since they should already have been freed up by rpcb_map_release(). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
invalidate_inode_pages2_range() takes page offset arguments, not byte ranges. Another thought is that individual pages might perhaps get evicted by VM pressure, in which case we might perhaps want to re-read not only the evicted page, but all subsequent pages too (in case the server returns more/less data per page so that the alignment of the next entry changes). We should therefore remove the condition that we only do this on page->index==0. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Thomas Bogendoerfer 提交于
The generated copy_page for R4k CPU with a 128 byte cache line size used Create Dirty Exclusive cache line operations even if only part of the cache line was filled. This change avoids generating cache operations, if only part of the cache line size is copied in one loop. It also increases the maxmimum loop size, because the generated code even fits into the available space for r4k CPUs with 128 byte cache line size. Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Shane McDonald 提交于
Resolve these mismatches by defining affected functions with the __cpuinit attribute, rather than __init. Signed-off-by: NShane McDonald <mcdonald.shane@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: it8213: fix return value in it8213_init_one() palm_bk3710: fix IDECLK period calculation ide: add __ide_default_irq() inline helper
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Sergei Shtylyov 提交于
The driver uses completely bogus rounding formula for calculating period from the IDECLK frequency which gives one-off period values (e.g. 11 ns with 100 MHz IDECLK) which in turn can lead to overclocked IDE transfer timings. Actually, rounding is just wrong in this case, so use a mere division for a safe result. While at it, also: - give 'ide_palm_clk' variable a more suitable name; - get rid of the useless 'ideclkp' variable; - drop the LISP stype 'p' postfix from the 'clkp' variable's name. :-) Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Cc: mcherkashin@ru.mvista.com Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Add __ide_default_irq() inline helper and use it instead of ide_default_irq() in ide-probe.c and ns87415.c (all host drivers except IDE PCI ones always setup hwif->irq so it is enough to check only for I/O bases 0x1f0 and 0x170). This fixes post-2.6.25 regression since ide_default_irq() define could shadow ide_default_irq() inline. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] protect _PAGE_SPECIAL bit against mprotect
-
由 David Gibson 提交于
As Andy Whitcroft recently pointed out, the current powerpc version of huge_ptep_set_wrprotect() has a bug. It just calls ptep_set_wrprotect() which in turn calls pte_update() then hpte_need_flush() with the 'huge' argument set to 0. This will cause hpte_need_flush() to flush the wrong hash entries (of any). Andy's fix for this is already in the powerpc tree as commit 016b33c4. I have confirmed this is a real bug, not masked by some other synchronization, with a new testcase for libhugetlbfs. A process write a (MAP_PRIVATE) hugepage mapping, fork(), then alter the mapping and have the child incorrectly see the second write. Therefore, this should be fixed for 2.6.26, and for the stable tree. Here is a suitable patch for 2.6.26, which I think will also be suitable for the stable tree (neither of the headers in question has been changed much recently). It is cut down slighlty from Andy's original version, in that it does not include a 32-bit version of huge_ptep_set_wrprotect(). Currently, hugepages are not supported on any 32-bit powerpc platform. When they are, a suitable 32-bit version can be added - the only 32-bit hardware which supports hugepages does not use the conventional hashtable MMU and so will have different needs anyway. Signed-off-by: NAndy Whitcroft <apw@shadowen.org> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 7月, 2008 5 次提交
-
-
由 Nick Piggin 提交于
Stop mprotect's pte_modify from wiping out the s390 pte_special bit, which caused oops thereafter when vm_normal_page thought X's abnormal was normal. Debugged-by: NRyan Hope <rmh3093@gmail.com> Debugged-by: NZan Lynx <zlynx@acm.org> Acked-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: Revert "PCI: Correct last two HP entries in the bfsort whitelist"
-
由 Jesse Barnes 提交于
This reverts commit a1676072. It duplicates the change from 8d64c781 and only one should be applied, otherwise some of the Dell quirks are lost. Thanks to Tony Camuso for catching this. Acked-by: NTony Camuso <tcamuso@redhat.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Jeff Dike 提交于
There are various constraints on the use of unit-at-a-time: - i386 uses no-unit-at-a-time for pre-4.0 (not 4.3) - x86_64 uses unit-at-a-time always Uli reported a crash on x86_64 with gcc 4.1.2 with unit-at-a-time, resulting in commit c0a18111 Ingo reported a gcc internal error with gcc 4.3 with no-unit-at-a-timem, resulting in 22eecde2 Benny Halevy is seeing extern inlines not resolved with gcc 4.3 with no-unit-at-a-time This patch reintroduces unit-at-a-time for gcc >= 4.0, bringing back the possibility of Uli's crash. If that happens, we'll debug it. I started seeing both the internal compiler errors and unresolved inlines on Fedora 9. This patch fixes both problems, without so far reintroducing the crash reported by Uli. Signed-off-by: NJeff Dike <jdike@linux.intel.com> Cc: Benny Halevy <bhalevy@panasas.com> Cc: Adrian Bunk <bunk@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: can: add sanity checks fs_enet: restore promiscuous and multicast settings in restart() ibm_newemac: Fixes entry of short packets ibm_newemac: Fixes kernel crashes when speed of cable connected changes pasemi_mac: Access iph->tot_len with correct endianness ehea: Access iph->tot_len with correct endianness ehea: fix race condition ehea: add MODULE_DEVICE_TABLE ehea: fix might sleep problem forcedeth: fix lockdep warning on ethtool -s Add missing skb->dev assignment in Frame Relay RX code bridge: fix use-after-free in br_cleanup_bridges() tcp: fix a size_t < 0 comparison in tcp_read_sock tcp: net/ipv4/tcp.c needs linux/scatterlist.h libertas: support USB persistence on suspend/resume (resend) iwlwifi: drop skb silently for Tx request in monitor mode iwlwifi: fix incorrect 5GHz rates reported in monitor mode
-
- 07 7月, 2008 8 次提交
-
-
由 Benjamin Herrenschmidt 提交于
A recent patch to legacy_serial.c factored out some code by using the of_match_node() facility to match a node against an array of possible matches. However, the patch didn't properly terminate the array causing potential crashes in cases where no match is found. In addition, the name of the array was poorly chosen for a static symbol making debugging harder. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
They print out a pointer in symbolic format, if possible (ie using symbolic KALLSYMS information). The '%pS' format is for regular direct pointers (which can point to data or code and that you find on the stack during backtraces etc), while '%pF' is for C function pointer types. On most architectures, the two mean exactly the same thing, but some architectures use an indirect pointer for C function pointers, where the function pointer points to a function descriptor (which in turn contains the actual pointer to the code). The '%pF' code automatically does the appropriate function descriptor dereference on such architectures. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This expands the kernel '%p' handling with an arbitrary alphanumberic specifier extension string immediately following the '%p'. Right now it's just being ignored, but the next commit will start adding some specific pointer type extensions. NOTE! The reason the extension is appended to the '%p' is to allow minimal gcc type checking: gcc will still see the '%p' and will check that the argument passed in is indeed a pointer, and yet will not complain about the extended information that gcc doesn't understand about (on the other hand, it also won't actually check that the pointer type and the extension are compatible). Alphanumeric characters were chosen because there is no sane existing use for a string format with a hex pointer representation immediately followed by alphanumerics (which is what such a format string would have traditionally resulted in). Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
The actual code is the same, just split out into a helper function. This makes it easier to read, and allows for simple future extension of %p handling. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
The actual code is the same, just split out into a helper function. This makes it easier to read, and allows for future sharing of the string code. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm由 Linus Torvalds 提交于
* 'kvm-updates-2.6.26' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: KVM: IOAPIC: Fix level-triggered irq injection hang x86: KVM guest: Add memory clobber to hypercalls
-
由 Philipp Zabel 提交于
The pxa27x DMA controller defaults to 64-bit alignment. This caused the SCR reads to fail (and, depending on card type, error out) when card->raw_scr was not aligned on a 8-byte boundary. For performance reasons all scatter-gather addresses passed to pxamci_request should be aligned on 8-byte boundaries, but if this can't be guaranteed, byte aligned DMA transfers in the have to be enabled in the controller to get correct behaviour. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This reverts commit e8721549. Andrey Borzenkov reports that it resulted in a totally hung machine for him when loading the OHCI driver. Extensive netconsole capture with SysRq output shows that modprobe gets stuck in ohci_hub_status_data() when probing and enabling the OHCI controller, see for example http://lkml.org/lkml/2008/7/5/236 for an analysis. The problem appears to be an interrupt flood triggered by the commit that gets reverted, and Andrey confirmed that the revert makes things work for him again. Reported-and-tested-by: NAndrey Borzenkov <arvidjaar@mail.ru> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Acked-by: NDavid Brownell <david-b@pacbell.net> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 7月, 2008 10 次提交
-
-
由 Mark McLoughlin 提交于
The "remote_irr" variable is used to indicate an interrupt which has been received by the LAPIC, but not acked. In our EOI handler, we unset remote_irr and re-inject the interrupt if the interrupt line is still asserted. However, we do not set remote_irr here, leading to a situation where if kvm_ioapic_set_irq() is called, then we go ahead and call ioapic_service(). This means that IRR is re-asserted even though the interrupt is currently in service (i.e. LAPIC IRR is cleared and ISR/TMR set) The issue with this is that when the currently executing interrupt handler finishes and writes LAPIC EOI, then TMR is unset and EOI sent to the IOAPIC. Since IRR is now asserted, but TMR is not, then when the second interrupt is handled, no EOI is sent and if there is any pending interrupt, it is not re-injected. This fixes a hang only seen while running mke2fs -j on an 8Gb virtio disk backed by a fully sparse raw file, with aliguori "avoid fragmented virtio-blk transfers by copying" changes. Signed-off-by: NMark McLoughlin <markmc@redhat.com> Acked-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Anthony Liguori 提交于
Hypercalls can modify arbitrary regions of memory. Make sure to indicate this in the clobber list. This fixes a hang when using KVM_GUEST kernel built with GCC 4.3.0. This was originally spotted and analyzed by Marcelo. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Oliver Hartkopp 提交于
Even though the CAN netlayer only deals with CAN netdevices, the netlayer interface to the userspace and to the device layer should perform some sanity checks. This patch adds several sanity checks that mainly prevent userspace apps to send broken content into the system that may be misinterpreted by some other userspace application. Signed-off-by: NOliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: NUrs Thuermann <urs.thuermann@volkswagen.de> Acked-by: NAndre Naujoks <nautsch@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-
由 Andrew Morton 提交于
Fix some issues in pagemap_read noted by Alexey: - initialize pagemap_walk.mm to "mm" , so the code starts working as advertised - initialize ->private to "&pm" so it wouldn't immediately oops in pagemap_pte_hole() - unstatic struct pagemap_walk, so two threads won't fsckup each other (including those started by root, including flipping ->mm when you don't have permissions) - pagemap_read() contains two calls to ptrace_may_attach(), second one looks unneeded. - avoid possible kmalloc(0) and integer wraparound. Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> [ Personally, I'd just remove the functionality entirely - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
These two macros are useful beyond lock debugging. Moved definitions from include/linux/debug_locks.h to include/linux/kernel.h, so code that needs them does not have to include the former, which would have been a less intuitive choice of a header. Signed-off-by: NEduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Acked-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: softlockup: print a module list on being stuck
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86 ACPI: fix resume from suspend to RAM on uniprocessor x86-64 x86 ACPI: normalize segment descriptor register on resume
-
由 Andrew Morton 提交于
Don't use a static entry, so as to prevent races during concurrent use of this function. Reported-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: ide_unregister() locking bugfix ide: ide_unregister() warm-plug bugfix ide: fix hwif->gendev refcounting
-