This also adds he required page "writeback" flag handling, that cifs
hasn't been doing and that the page dirty flag changes made obvious.
Acked-by: NSteve French <smfltc@us.ibm.com>
Acked-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We use the fixmap for accessing pci config space in pci_mmcfg_read/write().
The problem is in pci_exp_set_dev_base(). It is caching a last
accessed address to avoid calling set_fixmap_nocache() whenever
pci_mmcfg_read/write() is used.

  static inline void pci_exp_set_dev_base(int bus, int devfn)
  {
	u32 dev_base = base | (bus << 20) | (devfn << 12);
	if (dev_base != mmcfg_last_accessed_device) {
		mmcfg_last_accessed_device = dev_base;
		set_fixmap_nocache(FIX_PCIE_MCFG, dev_base);
	}
  }

            cpu0                                        cpu1
  ---------------------------------------------------------------------------
    pci_mmcfg_read("device-A")
        pci_exp_set_dev_base()
            set_fixmap_nocache()
                                              pci_mmcfg_read("device-B")
                                                  pci_exp_set_dev_base()
                                                      set_fixmap_nocache()
    pci_mmcfg_read("device-B")
        pci_exp_set_dev_base()
            /* doesn't flush tlb */

But if cpus accessed the above order, the second pci_mmcfg_read() on
cpu0 doesn't flush the TLB, because "mmcfg_last_accessed_device" is
device-B.  So, second pci_mmcfg_read() on cpu0 accesses a device-A via
a previous TLB cache. This problem became the cause of several strange
behavior.

This patches fixes this situation by adds "mmcfg_last_accessed_cpu" check.

[ Alternatively, we could make a per-cpu mapping area or something. Not
  that it's probably worth it, but if we wanted to avoid all locking and
  instead just disable preemption, that would be the way to go. --Linus ]
Signed-off-by: NOGAWA Hirofumi <hogawa@miraclelinux.com>
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clark Williams reported that suspend doesnt work on his laptop on
2.6.20-rc1-rt kernels. The bug was introduced by the following cleanup
commit:

 commit 112cecb2
 Author: Siddha, Suresh B <suresh.b.siddha@intel.com>
 Date:   Wed Dec 6 20:34:31 2006 -0800

    [PATCH] suspend: don't change cpus_allowed for task initiating the suspend

because with this change 'error' is not initialized to 0 anymore, if
there are no other online CPUs. (i.e. if the system is single-CPU).

the fix is the initialize it to 0. The really weird thing is that my
version of gcc does not warn about this non-initialized variable
situation ...

(also fix the kernel printk in the error branch, it was missing a
 newline)
Reported-by: NClark Williams <williams@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Thanks to Len Brown for testing this fix, since while they have in the
past, none of my machines run reiserfs at the moment.

Cc: Vladimir V. Saveliev <vs@namesys.com>
Acked-by: NLen Brown <lenb@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make cancel_dirty_page() act more like all the other dirty and writeback
accounting functions: test for "mapping" being NULL, and do the
NR_FILE_DIRY accounting purely based on mapping_cap_account_dirty()).

Also, add it to the exports, so that modular filesystems can use it.
Acked-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (68 commits)
  ACPI: replace kmalloc+memset with kzalloc
  ACPI: Add support for acpi_load_table/acpi_unload_table_id
  fbdev: update after backlight argument change
  ACPI: video: Add dev argument for backlight_device_register
  ACPI: Implement acpi_video_get_next_level()
  ACPI: Kconfig - depend on PM rather than selecting it
  ACPI: fix NULL check in drivers/acpi/osl.c
  ACPI: make drivers/acpi/ec.c:ec_ecdt static
  ACPI: prevent processor module from loading on failures
  ACPI: fix single linked list manipulation
  ACPI: ibm_acpi: allow clean removal
  ACPI: fix git automerge failure
  ACPI: ibm_acpi: respond to workqueue update
  ACPI: dock: add uevent to indicate change in device status
  ACPI: ec: Lindent once again
  ACPI: ec: Change #define to enums there possible.
  ACPI: ec: Style changes.
  ACPI: ec: Acquire Global Lock under EC mutex.
  ACPI: ec: Drop udelay() from poll mode. Loop by reading status field instead.
  ACPI: ec: Rename gpe_bit to gpe
  ...

The function isdn_ppp_ccp_reset_alloc_state() sets ->timer.function
and ->timer.data and later on calls add_timer() with no init_timer()
ever done.

Noted by Al Viro.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [UDP]: Fix reversed logic in udp_get_port().
  [IPV6]: Dumb typo in generic csum_ipv6_magic()
  [SCTP]: make 2 functions static
  [SCTP]: Fix typo adaption -> adaptation as per the latest API draft.
  [SCTP]: Don't export include/linux/sctp.h to userspace.
  [TCP]: Fix ambiguity in the `before' relation.
  [ATM] drivers/atm/fore200e.c: Cleanups.
  [ATM]: Remove dead ATM_TNETA1570 option.
  NetLabel: correctly fill in unused CIPSOv4 level and category mappings
  NetLabel: perform input validation earlier on CIPSOv4 DOI add ops

The logic in cfq_allow_merge() wasn't clear enough - basically allow
merging for the same queues only.  Do a fast check for 'rq and bio both
sync/async' before doing the cfqq hash lookup.

This is verified to work with the fixed elv_try_merge() from commit
bb4067e3.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When this code was converted to use sk_for_each() the
logic for the "best hash chain length" code was reversed,
breaking everything.

The original code was of the form:

			size = 0;
			do {
				if (++size >= best_size_so_far)
					goto next;
			} while ((sk = sk->next) != NULL);
			best_size_so_far = size;
			best = result;
		next:;

and this got converted into:

			sk_for_each(sk2, node, head)
				if (++size < best_size_so_far) {
					best_size_so_far = size;
					best = result;
				}

Which does something very very different from the original.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

... duh
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch makes the following needlessly global functions static:
- ipv6.c: sctp_inet6addr_event()
- protocol.c: sctp_inetaddr_event()
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NSridhar Samudrala <sri@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NIvan Skytte Jorgensen <isj-sctp@i1.dk>
Signed-off-by: NSridhar Samudrala <sri@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This file contains protocol definitions and there are no SCTP apps
that use this file.
Signed-off-by: NSridhar Samudrala <sri@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While looking at DCCP sequence numbers, I stumbled over a problem with
the following definition of before in tcp.h:

static inline int before(__u32 seq1, __u32 seq2)
{
        return (__s32)(seq1-seq2) < 0;
}

Problem: This definition suffers from an an ambiguity, i.e. always

           before(a, (a + 2^31) % 2^32)) = 1
           before((a + 2^31) % 2^32), a) = 1

         In text: when the difference between a and b amounts to 2^31,
         a is always considered `before' b, the function can not decide.
         The reason is that implicitly 0 is `before' 1 ... 2^31-1 ... 2^31

Solution: There is a simple fix, by defining before in such a way that
          0 is no longer `before' 2^31, i.e. 0 `before' 1 ... 2^31-1
          By not using the middle between 0 and 2^32, before can be made
          unambiguous.
          This is achieved by testing whether seq2-seq1 > 0 (using signed
          32-bit arithmetic).

I attach a patch to codify this. Also the `after' relation is basically
a redefinition of `before', it is now defined as a macro after before.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch contains the following transformations from custom functions
to standard kernel version:
- fore200e_kmalloc() -> kzalloc()
- fore200e_kfree() -> kfree()
- fore200e_swap() -> cpu_to_be32()
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes the unconverted ATM_TNETA1570 option that also lacks
any code in the kernel.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Back when the original NetLabel patches were being changed to use Netlink
attributes correctly some code was accidentially dropped which set all of the
undefined CIPSOv4 level and category mappings to a sentinel value.  The result
is the mappings data in the kernel contains bogus mappings which always map to
zero.  This patch restores the old/correct behavior by initializing the mapping
data to the correct sentinel value.
Signed-off-by: NPaul Moore <paul.moore@hp.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

There are a couple of cases where the user input for a CIPSOv4 DOI add
operation was not being done soon enough; the result was unexpected behavior
which was resulting in oops/panics/lockups on some platforms.  This patch moves
the existing input validation code earlier in the code path to protect against
bogus user input.
Signed-off-by: NPaul Moore <paul.moore@hp.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

 - add flush_cache_page() for all those virtual indexed cache
   architectures.

 - handle s390.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The uartlite driver used to always enable the port even if request_port
failed causing havoc. This patch fixes it.
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes the case when we reparent to a different thread in the
same thread group.  This modifies the code so that we do not send
signals and do not change the signal to send to SIGCHLD unless we have
change the thread group of our parents.  It also suppresses sending
pdeath_sig in this cas as well since the result of geppid doesn't
change.

Thanks to Oleg for spotting my bug of only fixing this for non-ptraced
tasks.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Albert Cahalan <acahalan@gmail.com>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Coywolf Qi Hunt <qiyong@fc-cn.com>
Acked-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

compile.h is created super-late in the build.  But proc_misc.c want to include
it, and it's generally not sane to have a header file in include/linux be
created at the end of the build: it's either not present or, worse, wrong for
most of the build.

So the patch arranges for compile.h to be built at the start of the build
process.  It also consolidates the compile.h rules with those for version.h
and utsname.h, so they all get built together.

I hope.  My chances of having got this right are about 2%.

Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fernando Lopez-Lezcano reported frequent scheduling latencies and audio
xruns starting at the 2.6.18-rt kernel, and those problems persisted all
until current -rt kernels. The latencies were serious and unjustified by
system load, often in the milliseconds range.

After a patient and heroic multi-month effort of Fernando, where he
tested dozens of kernels, tried various configs, boot options,
test-patches of mine and provided latency traces of those incidents, the
following 'smoking gun' trace was captured by him:

                 _------=> CPU#
                / _-----=> irqs-off
               | / _----=> need-resched
               || / _---=> hardirq/softirq
               ||| / _--=> preempt-depth
               |||| /
               |||||     delay
   cmd     pid ||||| time  |   caller
      \   /    |||||   \   |   /
  IRQ_19-1479  1D..1    0us : __trace_start_sched_wakeup (try_to_wake_up)
  IRQ_19-1479  1D..1    0us : __trace_start_sched_wakeup <<...>-5856> (37 0)
  IRQ_19-1479  1D..1    0us : __trace_start_sched_wakeup (c01262ba 0 0)
  IRQ_19-1479  1D..1    0us : resched_task (try_to_wake_up)
  IRQ_19-1479  1D..1    0us : __spin_unlock_irqrestore (try_to_wake_up)
  ...
  <idle>-0     1...1   11us!: default_idle (cpu_idle)
  ...
  <idle>-0     0Dn.1  602us : smp_apic_timer_interrupt (c0103baf 1 0)
  ...
   <...>-5856  0D..2  618us : __switch_to (__schedule)
   <...>-5856  0D..2  618us : __schedule <<idle>-0> (20 162)
   <...>-5856  0D..2  619us : __spin_unlock_irq (__schedule)
   <...>-5856  0...1  619us : trace_stop_sched_switched (__schedule)
   <...>-5856  0D..1  619us : trace_stop_sched_switched <<...>-5856> (37 0)

what is visible in this trace is that CPU#1 ran try_to_wake_up() for
PID:5856, it placed PID:5856 on CPU#0's runqueue and ran resched_task()
for CPU#0. But it decided to not send an IPI that no CPU - due to
TS_POLLING. But CPU#0 never woke up after its NEED_RESCHED bit was set,
and only rescheduled to PID:5856 upon the next lapic timer IRQ. The
result was a 600+ usecs latency and a missed wakeup!

the bug turned out to be an idle-wakeup bug introduced into the mainline
kernel this summer via an optimization in the x86_64 tree:

    commit 495ab9c0
    Author: Andi Kleen <ak@suse.de>
    Date:   Mon Jun 26 13:59:11 2006 +0200

    [PATCH] i386/x86-64/ia64: Move polling flag into thread_info_status

    During some profiling I noticed that default_idle causes a lot of
    memory traffic. I think that is caused by the atomic operations
    to clear/set the polling flag in thread_info. There is actually
    no reason to make this atomic - only the idle thread does it
    to itself, other CPUs only read it. So I moved it into ti->status.

the problem is this type of change:

        if (!hlt_counter && boot_cpu_data.hlt_works_ok) {
-               clear_thread_flag(TIF_POLLING_NRFLAG);
+               current_thread_info()->status &= ~TS_POLLING;
                smp_mb__after_clear_bit();
                while (!need_resched()) {
                        local_irq_disable();

this changes clear_thread_flag() to an explicit clearing of TS_POLLING.
clear_thread_flag() is defined as:

        clear_bit(flag, &ti->flags);

and clear_bit() is a LOCK-ed atomic instruction on all x86 platforms:

  static inline void clear_bit(int nr, volatile unsigned long * addr)
  {
          __asm__ __volatile__( LOCK_PREFIX
                  "btrl %1,%0"

hence smp_mb__after_clear_bit() is defined as a simple compile barrier:

  #define smp_mb__after_clear_bit()       barrier()

but the explicit TS_POLLING clearing introduced by the patch:

+               current_thread_info()->status &= ~TS_POLLING;

is not an atomic op! So the clearing of the TS_POLLING bit is freely
reorderable with the reading of the NEED_RESCHED bit - and both now
reside in different memory addresses.

CPU idle wakeup very much depends on ordered memory ops, the clearing of
the TS_POLLING flag must always be done before we test need_resched()
and hit the idle instruction(s). [Symmetrically, the wakeup code needs
to set NEED_RESCHED before it tests the TS_POLLING flag, so memory
ordering is paramount.]

Fernando's dual-core Athlon64 system has a sufficiently advanced memory
ordering model so that it triggered this scenario very often.

( And it also turned out that the reason why these latencies never
  triggered on my testsystems is that i routinely use idle=poll, which
  was the only idle variant not affected by this bug. )

The fix is to change the smp_mb__after_clear_bit() to an smp_mb(), to
act as an absolute barrier between the TS_POLLING write and the
NEED_RESCHED read. This affects almost all idling methods (default,
ACPI, APM), on all 3 x86 architectures: i386, x86_64, ia64.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Tested-by: NFernando Lopez-Lezcano <nando@ccrma.Stanford.EDU>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In the current jbd code, if a buffer on BJ_SyncData list is dirty and not
locked, the buffer is refiled to BJ_Locked list, submitted to the IO and
waited for IO completion.

But the fsstress test showed the case that when a buffer was already
submitted to the IO just before the buffer_dirty(bh) check, the buffer was
not waited for IO completion.

Following patch solves this problem.  If it is assumed that a buffer is
submitted to the IO before the buffer_dirty(bh) check and still being
written to disk, this buffer is refiled to BJ_Locked list.
Signed-off-by: NHisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Cc: Jan Kara <jack@ucw.cz>
Cc: "Stephen C. Tweedie" <sct@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The general gpio driver includes seem to now depend on having
<linux/workqueue.h> included before they are.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

While developing more functionality in mdadm I found some bugs in md...

- When we remove a device from an inactive array (write 'remove' to
  the 'state' sysfs file - see 'state_store') would should not
  update the superblock information - as we may not have
  read and processed it all properly yet.

- initialise all raid_disk entries to '-1' else the 'slot sysfs file
  will claim '0' for all devices in an array before the array is
  started.

- all '\n' not to be present at the end of words written to
  sysfs files

- when we use SET_ARRAY_INFO to set the md metadata version,
  set the flag to say that there is persistant metadata.

- allow GET_BITMAP_FILE to be called on an array that hasn't
  been started yet.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Linus sayeth:

Google knows everything, and finds, on MS own site no less:

  "Windows 2000 default resources:

   One 4K memory window

   One 2 MB memory window

   Two 256-byte I/O windows"

which is clearly utterly bogus and insufficient. But Microsoft apparently
realized this, and:

  "Windows XP default resources:

   Because one memory window of 4K and one window of 2 MB are not
   sufficient for CardBus controllers in many configurations, Windows XP
   allocates larger memory windows to CardBus controllers where possible.
   However, resource windows are static (that is, the operating system
   does not dynamically allocate larger memory windows if new devices
   appear.) Under Windows XP, CardBus controllers will be assigned the
   following resources:

   One 4K memory window, as in Windows 2000

   64 MB memory, if that amount of memory is available. If 64 MB is not
   available the controller will receive 32 MB; if 32 MB is not available,
   the controller will receive 16 MB; if 16 MB is not available, the
   bridge will receive 8 MB; and so on down to a minimum assignment of 1
   MB in configurations where memory is too constrained for the operating
   system to provide a larger window.

   Two 256-byte I/O windows"

So I think we have our answer. Windows uses one 4k window, and one 64MB
window. And they are no more dynamic than we are (we _could_ try to do it
dynamically, but let's face it, it's fairly painful to dynamically expand
PCI bus resources - you may need to reprogram everything up to the root,
so it would be absolutely crazy to do that unless you have some serious
masochistic tendencies).

So let's just increase our default value to 64M too.

Cc: Markus Rechberger <mrechberger@gmail.com>
Cc: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

          text    data     bss     dec     hex filename
before:   4036      44       0    4080     ff0 kernel/relay.o
after:    3727      44       0    3771     ebb kernel/relay.o

Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Tom Zanussi <zanussi@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The PDA patches introduced a bug in ptrace: it reads eflags from the wrong
place on the target's stack, but writes it back to the correct place.  The
result is a corrupted eflags, which is most visible when it turns interrupts
off unexpectedly.

This patch fixes this by making the ptrace code a little less fragile.  It
changes [gs]et_stack_long to take a straightforward byte offset into struct
pt_regs, rather than requiring all callers to do a sizeof(struct pt_regs)
offset adjustment.  This means that the eflag's offset (EFL_OFFSET) on the
target stack can be simply computed with offsetof().
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Cc: Frederik Deweerdt <deweerdt@free.fr>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix compile error when config memory hotplug with numa on i386.

The cause of compile error was missing of arch_add_memory(),
remove_memory(), and memory_add_physaddr_to_nid().
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Acked-by: NDavid Rientjes <rientjes@cs.washington.edu>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is a change to include <linux/netdevice.h> in <linux/if_fddi.h> which is
needed for "struct fddi_statistics".
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I don't have the time to work on Linux Documentation, so I really should
document that in MAINTAINERS.  With Randy, kernel-doc is in good hands
anyway.
Signed-off-by: NMartin Waitz <tali@admingilde.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make kernel-doc support unnamed (anonymous) structs and unions.  There is
one (union) in include/linux/skbuff.h (inside struct sk_buff) that is
currently generating a kernel-doc warning, so this fixes that warning.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Christoph Hellwig has expressed concerns that the recent fdtable changes
expose the details of the RCU methodology used to release no-longer-used
fdtable structures to the rest of the kernel.  The trivial patch below
addresses these concerns by introducing the appropriate free_fdtable()
calls, which simply wrap the release RCU usage.  Since free_fdtable() is a
one-liner, it makes sense to promote it to an inline helper.
Signed-off-by: NVadim Lobanov <vlobanov@speakeasy.net>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixes some bugs in the gxt4500 framebuffer driver, and adds support
for GXT6000P cards.

First, I had the red and blue channels swapped in the colormap update code,
resulting in penguins' noses and feet turning blue (though the penguins
weren't actually shivering :).

Secondly, the code that calculated the values to put in the PLL that
generates the pixel clock wasn't observing some constraints that I wasn't
originally aware of, but am now that I have some documentation on the chip.

The GXT6000P is essentially identical from software's point of view, except
for a different reference clock for the PLL, and the addition of a geometry
engine (which this driver doesn't use).
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It is unnecessary and invalid to call sysfs_remove_group() after
sysfs_create_group() failure.

Cc: Sebastien Bouchard <sebastien.bouchard@ca.kontron.com>
Cc: Mark Gross <mark.gross@intel.com>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Change the email address for the S3C2410 and S3C2440 maintainer.  The old
addresses have been deleted due to spam issues.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Structure mc_cpu_notifier references a __cpuinit function, but isn't
declared __cpuinitdata itself:

WARNING: arch/i386/kernel/microcode.o - Section mismatch: reference
to .init.text: from .data after 'mc_cpu_notifier' (at offset 0x118)
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>