- 22 10月, 2010 2 次提交
-
-
由 Lars Ellenberg 提交于
If those messages ever get logged, clearly state that they are actually failed ASSERTS, so our regression tests can pick them up from the logs more easily. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
Every code path changing the current UUID needs to get it on stable storage anyways. Flush it to disk right there, remove the now obsolte explicit drbd_md_sync statements in the other code paths. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
- 19 10月, 2010 1 次提交
-
-
由 Mike Miller 提交于
cciss: fix PCI IDs for new controllers This patch fixes the botched up PCI IDs of new controllers. Please consider this patch for inclusion. Signed-off-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 15 10月, 2010 37 次提交
-
-
由 Lars Ellenberg 提交于
This adds a necessary race breaker to these commits: drbd: fix for possible deadlock on IO error during resync drbd: drop wrong debug asserts, fix recently introduced race What we do is get a refcount, check the state, then depending on the state and the requested minimum disk state, either hold it (success), or give it back immediately (failed "try lock"). Some code paths (flushing of drbd metadata) may still grab and hold a refcount even if we are D_FAILED (application IO won't). So even if we hit local_cnt == 0 once after being D_FAILED, we still need to wait for that again after we changed to D_DISKLESS. Once local_cnt reaches 0 while we are D_DISKLESS, we can be sure that no one will look at the protected members anymore, so only then is it safe to free them. We cannot easily convert to standard locking primitives here, as we want to be able to use it in atomic context (we always do a "try lock"), as well as hold references for a "long time" (from IO submission to completion callback). Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
-
由 Dan Carpenter 提交于
dt is unsigned so it's never less than zero. We are calculating the elapsed time, and that's never less than zero (unless there is a bug or we invent time travel). The comparison here is just to guard against divide by zero bugs. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
-
由 Lars Ellenberg 提交于
Consolidate the ifdef's for the debug level, accidentally the used both DEBUG and DRBD_DEBUG_MD_SYNC. Default to off. For production, we can safely reduce the grace period for this timer again the the value we used to have. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
It sometimes may take a while for the after state change work to be scheduled, which does drbd_md_sync. At convenient places, we should do explicit drbd_md_sync to have the new state information on disk as soon as possible. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
commit 2372c38caadeaebc68a5ee190782c2a0df01edc3 drbd: fix for possible deadlock on IO error during resync introduced a new ASSERT, which turns out to be wrong. Drop it. Also serialize the state change to D_DISKLESS with the after state change work of the -> D_FAILED transition, don't open a new race. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
As we usually update the generation UUIDs here, we should explicitly sync them to disk. So far this has been done only implicitly by related code paths. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
This might happen if on the VERIFY_S node the disk gets dropped. Although this is an cluster wide state transition, the VERIFY_T node, updates it connection state first. Then the ack packet for the cluster wide state transition travels back, and the VERIFY_S node stops to produce the P_OV_REQUEST packets. There is absolutely nothing wrong with that. Further, do not log "Can not satisfy peer's..." on the VERIFY_S node in this case, but pretend that they had equal checksum. [Bugz 327] Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
Scenario: Something (say, flush-147:0) is in drbd_al_begin_io, holding a local_cnt, waiting for the resync to make progress. Disk fails, worker in after_state_ch does drbd_rs_cancel_all, then waits for local_cnt to drop to zero. flush-147:0 is woken by drbd_rs_cancel_all, needs to write an AL transaction, and queues that on the worker. Deadlock. Fix: do not wait in the worker, have put_ldev() trigger the state change D_FAILED -> D_DISKLESS when necessary. put_ldev() cannot do the state change directly, as it may or may not already hold various spinlocks. We queue a short work instead. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
Various cleanup paths have been incomplete, for the very unlikely case that we cannot allocate enough bios from process context when submitting on behalf of the peer or resync process. Never observed. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
If it was an "empty" resync, the SyncSource may have already "finished" the resync and rotated the UUIDs, before noticing the connection loss (and generating a new uuid, if Primary, rotating again), while the SyncTarget did not change its uuids at all, or only got to the previous sync-uuid. This would then again lead to a full sync on next handshake (see also Bug #251). Fix: Use explicit resync finished notification even for empty resyncs, do not finish an empty resync implicitly on the SyncSource. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
Preparation patch so more drbd_send_state() usage on the peer will not confuse drbd in receive_state(). Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
no functional change, just using full state instead of just the .conn part of it for comparisons. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
drbd commit 17c854fea474a5eb3cfa12e4fb019e46debbc4ec drbd: receiving of big packets, for payloads between 64kByte and 4GByte introduced a new on-the-wire packet header format. We must no longer assume either format, but use the result of whatever drbd_recv_header has decoded. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
We used to be16_to_cpu the length field in our received packet header. drbd commit 17c854fea474a5eb3cfa12e4fb019e46debbc4ec drbd: receiving of big packets, for payloads between 64kByte and 4GByte changed this, but forgot to adjust a few places where we relied on h->length being in native byte order. This broke the receiving side of the RLE compressed bitmap exchange. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
This caused rs_planed to be not in sync with the content of the fifo. That in turn could cause that the resync comes to a complete halt. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Connections through a compressing proxy might have more bits on the fly. 500MByte instead of 50MByte Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
If we release the page pointed to by md_io_tmpp, we need to zero out the pointer, too, as that may be used later to decide whether we need to allocate a new page again. Impact: a previously freed page may be used and clobbered. Depending on what that particular page is being used for meanwhile, this may result in silent data corruption of completely unrelated things. Only of concern on devices with logical_block_size != 512 byte, if you re-attach after becoming diskless once. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
Two missing corner cases to the "maximum packet size" handshake. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
There are three ways to get IO suspended: * Loss of any access to data * Fence-peer-handler running * User requested to suspend IO Track those in different bits, so that one condition clearing its state bit does not interfere with the other two conditions. Only when the user resumes IO he overrules all three bits. The fact is hidden from the user, he sees only a single suspend bit. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Forgot to consider the max size for the resync requests. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
If a synctarget lost connection while being WFSyncUUID, due to "state sanitizing", the attempted state change to SyncTarget looked like an "invalidate" to after_state_ch() later, thus caused a full sync on next handshake (Bug #318). drbd0: PingAck did not arrive in time. drbd0: peer( Primary -> Unknown ) conn( WFSyncUUID -> NetworkFailure ) pdsk( UpToDate -> DUnknown ) from : { cs:NetworkFailure ro:Secondary/Unknown ds:UpToDate/DUnknown r--- } to : { cs:SyncTarget ro:Secondary/Unknown ds:Inconsistent/DUnknown r--- } after sanizising, resulted in state: { cs:NetworkFailure ro:Secondary/Unknown ds:Inconsistent/DUnknown r--- } drbd0: disk( UpToDate -> Inconsistent ) Fix: don't mask state transition errors in "sanitizing", so the requested state change to SyncTarget fails, instead of being implicitly "remaped" to invalidate. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
If we cannot satisfy a request (because our disk just broke), we still need to drain the payload. Or we'll get a protocol error when interpreting the payload as DRBD packet header. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
BUG trace would look like: lc_find drbd_rs_complete_io got_OVResult drbd_asender Could be triggered by explicit, or IO-error policy based, detach during online-verify. We may only dereference mdev->resync, if we first get_ldev(), as the disk may break any time, causing mdev->resync to disappear once all ldev references have been returned. Already in flight online-verify requests or replies may still come in, which we then need to ignore. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
Just in case we have some pending meta data changes to sync, do it before we call our userland helper, as that may take some time, or even cause a hard reboot. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
addendum to baa33ae4eaa4477b60af7c434c0ddd1d182c1ae7 The race: drbd_md_sync() if (!test_and_clear_bit(MD_DIRTY, &mdev->flags)) return; ==> RACE with drbd_md_mark_dirty() rearming the timer. del_timer(&mdev->md_sync_timer); Fixed by moving the del_timer before the test_and_clear_bit. Additionally only rearm the timer in drbd_md_mark_dirty, if MD_DIRTY was not already set, reduce the grace period from five to one second, and add an ifdef'ed debuging aid to find code paths missing an explicit drbd_md_sync, if any, as those are the only relevant ones for this race. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
The actual race happened int the drbd_start_resync() function. Where drbd_resync_finished() -> __drbd_set_state() set STOP_SYNC_TIMER and armed the timer. If the timer fired before execution reaches the mod_timer statement at the end of drbd_start_resync() the latter would cause an unexpected call to w_make_resync_request(). Removed the STOP_SYNC_TIMER bit, and base it on the connection state. The STOP_SYNC_TIMER bit probably originates probably the time before the state engine. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
If pacemaker (for example) decided to initialize minor devices not in the exact sync-after dependency order, the configuration partially failed with an error "The sync-after minor number is invalid". (Bugz. #322) We can avoid that by implicitly creating unconfigured minor devices, if others depend on them. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
The race: drbd_md_mark_dirty() drbd_md_sync() if (!test_and_clear_bit(MD_DIRTY, &mdev->flags)) return; drbd_md_sync_page_io(mdev, mdev->ldev, sector, WRITE) ==> RACE clear_bit(MD_DIRTY, &mdev->flags); <== spurious Fixed by removing the spurious clear_bit. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
If a drbd_nl_net_conf hits the small window between the state change to C_STANDALONE and the corresponding cleanup in after_state_ch, that cleanup would throw away stuff we now need again, and later trigger BUG_ON()s. Fixed by properly serializing the new config request with any pending cleanup. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
When the complete device is marked as out of sync, we can disable updates of the on disk AL. Currently AL updates are only disabled if one uses the "invalidate-remote" command on an unconnected, primary device, or when at attach time all bits in the bitmap are set. As of now, AL updated do not get disabled when a all bits becomes set due to application writes to an unconnected DRBD device. While this is a missing feature, it is not considered important, and might get added later. BTW, after initializing a "one legged" DRBD device drbdadm create-md resX drbdadm -- --force primary resX AL updates also get disabled, until the first connect. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-