Convert all hex addresses in node unit addresses to lower case to fix warnings
like:
    arch/arm/boot/dts/exynos5422-odroidhc1.dtb: Warning (simple_bus_reg):
      Node /soc/nocp@10CA1000 simple-bus unit address format error, expected "10ca1000"

Conversion was done using sed:

    $ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm/boot/dts/exynos*.dts*
Suggested-by: NRob Herring <robh@kernel.org>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

Add nodes for the True Random Number Generator found in Samsung Exynos
5250+ SoCs.
Signed-off-by: NŁukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

Add nodes for Pseudo Random Number Generator in dts files describing
Exynos5 chips.
Signed-off-by: NŁukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

Add support for G3D power domain, which contains ARM Mali-600MP
graphics accelerator device (not yet instantiated).
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

Audio power domain includes following hardware modules: Pin controller
for GPZ bank, AudioSS clock controller and three Exynos I2S controller.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

Device nodes in device tree should use generic names, so rename
all existing domains to "power-domain".
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

PMU (system-controller@10040000) is used as interrupt-parent for certain
nodes thus it should be marked as interrupt-controller to silence
warnings when building Exynos5410-based DTBs:

  arch/arm/boot/dts/exynos5410-odroidxu.dtb: Warning (interrupts_property):
    Missing interrupt-controller or interrupt-map property in /soc/system-controller@10040000
  arch/arm/boot/dts/exynos5410-odroidxu.dtb: Warning (interrupts_property):
    Missing #interrupt-cells in interrupt-parent /soc/system-controller@10040000
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

Audio power domain includes following hardware modules: Pin controller
for GPZ bank, AudioSS clock controller, PL330 ADMA device and Exynos I2S
controller.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

Looking at the schematic, LDO15 and LDO17 are tied as a power source of a
builtin network chipset. Correct voltage on LDO15 to 3.3V and the name
of LDO17 to "vdd_ldo17".
Signed-off-by: NDongjin Kim <tobetter@gmail.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

Exynos4412 ISP clock controller is located in the SOC area, which belongs
to ISP power domain. This patch instantiates a separate clock driver
for those clocks, updates all clients of ISP clocks and ensures that the
driver is properly integrated in ISP power domin.

This finally solves all the mysterious freezes in accessing ISP clocks
when ISP power domain is disabled.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

Current the node is only defined in the exynos5250 DT, while
the corresponding SYSMMUs are also to be found in the exynos5420
DT. Move the node to exynos5 and only setup the SYSMMUs in the
corresponding DT.

Disable the node by default, since exynos5410 also includes
the dtsi, but currently does not define the G2D clock.
Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
[mszyprow: rephrased commit message]
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

Enable support for ARM Performance Monitoring Units available in Cortex-A7
and Cortex-A15 CPU cores for Exynos54xx SoCs (5410, 5420 and 5422/5800).

The PMUs interrupts are defined in the common exynos54xx.dtsi device tree,
but the PMUs are enabled and have their interrupt CPU affinity defined
next to each SoC's cpus node.

Tested with perf on Odroid XU4 (Exynos5422):
armv7_cortex_a7 PMU driver: 5 counters available
armv7_cortex_a15 PMU driver: 7 counters available
Suggested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NMarian Mihailescu <mihailescu2m@gmail.com>
Signed-off-by: NWilly Wolff <willy.mh.wolff@gmail.com>
[mszyprow: reordered nodes according to krzk request, fixed typos]
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

Move Security Subsystem nodes common for Exynos5250 and Exynos54xx
to exynos5.dtsi to avoid duplication.
Signed-off-by: NŁukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

This patch allows the bcm4334 to power on and enables WiFi functionality
on Trats2.
Signed-off-by: NSimon Shields <simon@lineageos.org>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

Trats2 uses gpf2-1 as the panel reset GPIO. gpy4-5 was only used
on early revisions of the board.

Fixes: 420ae845 ("ARM: dts: exynos4412-trats2: add panel node")
Signed-off-by: NSimon Shields <simon@lineageos.org>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

This patch adds support for Odroid XU4 audio. The main difference
comparing to Odroid XU3 is a missing on-board audio CODEC, only
HDMI output is supported on Odroid XU4. External CODEC could be
optionally connected to the I2S port connector.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

The new sound card DT binding is used for Odroid XU3 in order
to properly support the HDMI audio path.  Clocks configuration is
changed so the I2S controller is now the bit clock and the frame clock
master.  The EPLL output clock is now the audio root clock adjusted to
each audio sample rate.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

Pull ARM fixes from Russell King:

 - LPAE fixes for kernel-readonly regions

 - Fix for get_user_pages_fast on LPAE systems

 - avoid tying decompressor to a particular platform if DEBUG_LL is
   enabled

 - BUG if we attempt to return to userspace but the to-be-restored PSR
   value keeps us in privileged mode (defeating an issue that ftracetest
   found)

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: BUG if jumping to usermode address in kernel mode
  ARM: 8722/1: mm: make STRICT_KERNEL_RWX effective for LPAE
  ARM: 8721/1: mm: dump: check hardware RO bit for LPAE
  ARM: make decompressor debug output user selectable
  ARM: fix get_user_pages_fast

Pull irq fixes from Thomas Glexiner:

 - unbreak the irq trigger type check for legacy platforms

 - a handful fixes for ARM GIC v3/4 interrupt controllers

 - a few trivial fixes all over the place

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/matrix: Make - vs ?: Precedence explicit
  irqchip/imgpdc: Use resource_size function on resource object
  irqchip/qcom: Fix u32 comparison with value less than zero
  irqchip/exiu: Fix return value check in exiu_init()
  irqchip/gic-v3-its: Remove artificial dependency on PCI
  irqchip/gic-v4: Add forward definition of struct irq_domain_ops
  irqchip/gic-v3: pr_err() strings should end with newlines
  irqchip/s3c24xx: pr_err() strings should end with newlines
  irqchip/gic-v3: Fix ppi-partitions lookup
  irqchip/gic-v4: Clear IRQ_DISABLE_UNLAZY again if mapping fails
  genirq: Track whether the trigger type has been set

Pull misc x86 fixes from Ingo Molnar:
 - topology enumeration fixes
 - KASAN fix
 - two entry fixes (not yet the big series related to KASLR)
 - remove obsolete code
 - instruction decoder fix
 - better /dev/mem sanity checks, hopefully working better this time
 - pkeys fixes
 - two ACPI fixes
 - 5-level paging related fixes
 - UMIP fixes that should make application visible faults more debuggable
 - boot fix for weird virtualization environment

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86/decoder: Add new TEST instruction pattern
  x86/PCI: Remove unused HyperTransport interrupt support
  x86/umip: Fix insn_get_code_seg_params()'s return value
  x86/boot/KASLR: Remove unused variable
  x86/entry/64: Add missing irqflags tracing to native_load_gs_index()
  x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow
  x86/entry/64: Fix entry_SYSCALL_64_after_hwframe() IRQ tracing
  x86/pkeys/selftests: Fix protection keys write() warning
  x86/pkeys/selftests: Rename 'si_pkey' to 'siginfo_pkey'
  x86/mpx/selftests: Fix up weird arrays
  x86/pkeys: Update documentation about availability
  x86/umip: Print a warning into the syslog if UMIP-protected instructions are used
  x86/smpboot: Fix __max_logical_packages estimate
  x86/topology: Avoid wasting 128k for package id array
  perf/x86/intel/uncore: Cache logical pkg id in uncore driver
  x86/acpi: Reduce code duplication in mp_override_legacy_irq()
  x86/acpi: Handle SCI interrupts above legacy space gracefully
  x86/boot: Fix boot failure when SMP MP-table is based at 0
  x86/mm: Limit mmap() of /dev/mem to valid physical addresses
  x86/selftests: Add test for mapping placement for 5-level paging
  ...

Pull scheduler fixes from Ingo Molnar:
 "Misc fixes: a documentation fix, a Sparse warning fix and a debugging
  fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/debug: Fix task state recording/printout
  sched/deadline: Don't use dubious signed bitfields
  sched/deadline: Fix the description of runtime accounting in the documentation

Pull perf fixes from Ingo Molnar:
 "Misc fixes: two PMU driver fixes and a memory leak fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix memory leak triggered by perf --namespace
  perf/x86/intel/uncore: Add event constraint for BDX PCU
  perf/x86/intel: Hide TSX events when RTM is not supported

Pull static key fix from Ingo Molnar:
 "Fix a boot warning related to bad init ordering of the static keys
  self-test"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  jump_label: Invoke jump_label_test() via early_initcall()

Pull objtool fixes from Ingo Molnar:
 "A handful of objtool fixes, most of them related to making the UAPI
  header-syncing warnings easier to read and easier to act upon"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools/headers: Sync objtool UAPI header
  objtool: Fix cross-build
  objtool: Move kernel headers/code sync check to a script
  objtool: Move synced files to their original relative locations
  objtool: Make unreachable annotation inline asms explicitly volatile
  objtool: Add a comment for the unreachable annotation macros

Detect if we are returning to usermode via the normal kernel exit paths
but the saved PSR value indicates that we are in kernel mode.  This
could occur due to corrupted stack state, which has been observed with
"ftracetest".

This ensures that we catch the problem case before we get to user code.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

Pull timer updates from Thomas Gleixner:

 - The final conversion of timer wheel timers to timer_setup().

   A few manual conversions and a large coccinelle assisted sweep and
   the removal of the old initialization mechanisms and the related
   code.

 - Remove the now unused VSYSCALL update code

 - Fix permissions of /proc/timer_list. I still need to get rid of that
   file completely

 - Rename a misnomed clocksource function and remove a stale declaration

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  m68k/macboing: Fix missed timer callback assignment
  treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts
  timer: Remove redundant __setup_timer*() macros
  timer: Pass function down to initialization routines
  timer: Remove unused data arguments from macros
  timer: Switch callback prototype to take struct timer_list * argument
  timer: Pass timer_list pointer to callbacks unconditionally
  Coccinelle: Remove setup_timer.cocci
  timer: Remove setup_*timer() interface
  timer: Remove init_timer() interface
  treewide: setup_timer() -> timer_setup() (2 field)
  treewide: setup_timer() -> timer_setup()
  treewide: init_timer() -> setup_timer()
  treewide: Switch DEFINE_TIMER callbacks to struct timer_list *
  s390: cmm: Convert timers to use timer_setup()
  lightnvm: Convert timers to use timer_setup()
  drivers/net: cris: Convert timers to use timer_setup()
  drm/vc4: Convert timers to use timer_setup()
  block/laptop_mode: Convert timers to use timer_setup()
  net/atm/mpc: Avoid open-coded assignment of timer callback function
  ...

Pull ARC updates from Vineet Gupta:

 - more changes for HS48 cores: supporting MMUv5, detecting new
   micro-arch gizmos

 - axs10x platform wiring up reset driver merged in this cycle

 - ARC perf driver optimizations

* tag 'arc-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: perf: avoid vmalloc backed mmap
  ARCv2: perf: optimize given that num counters <= 32
  ARCv2: perf: tweak overflow interrupt
  ARC: [plat-axs10x] DTS: Add reset controller node to manage ethernet reset
  ARCv2: boot log: updates for HS48: dual-issue, ECC, Loop Buffer
  ARCv2: Accomodate HS48 MMUv5 by relaxing MMU ver checking
  ARC: [plat-axs10x] auto-select AXS101 or AXS103 given the  ISA config

Pull more Kbuild updates from Masahiro Yamada:

 - use 'pwd' instead of '/bin/pwd' for portability

 - clean up Makefiles

 - fix ld-option for clang

 - fix malloc'ed data size in Kconfig

 - fix parallel building along with coccicheck

 - fix a minor issue of package building

 - prompt to use "rpm-pkg" instead of "rpm"

 - clean up *.i and *.lst patterns by "make clean"

* tag 'kbuild-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: drop $(extra-y) from real-objs-y
  kbuild: clean up *.i and *.lst patterns by make clean
  kbuild: rpm: prompt to use "rpm-pkg" if "rpm" target is used
  kbuild: pkg: use --transform option to prefix paths in tar
  coccinelle: fix parallel build with CHECK=scripts/coccicheck
  kconfig/symbol.c: use correct pointer type argument for sizeof
  kbuild: Set KBUILD_CFLAGS before incl. arch Makefile
  kbuild: remove all dummy assignments to obj-
  kbuild: create built-in.o automatically if parent directory wants it
  kbuild: /bin/pwd -> pwd

Pull AFS fixes from David Howells:

 - Make AFS file locking work again.

 - Don't write to a page that's being written out, but wait for it to
   complete.

 - Do d_drop() and d_add() in the right places.

 - Put keys on error paths.

 - Remove some redundant code.

* tag 'afs-fixes-20171124' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: remove redundant assignment of dvnode to itself
  afs: cell: Remove unnecessary code in afs_lookup_cell
  afs: Fix signal handling in some file ops
  afs: Fix some dentry handling in dir ops and missing key_puts
  afs: Make afs_write_begin() avoid writing to a page that's being stored
  afs: Fix file locking

Pull KVM updates from Radim Krčmář:
 "Trimmed second batch of KVM changes for Linux 4.15:

   - GICv4 Support for KVM/ARM

   - re-introduce support for CPUs without virtual NMI (cc stable) and
     allow testing of KVM without virtual NMI on available CPUs

   - fix long-standing performance issues with assigned devices on AMD
     (cc stable)"

* tag 'kvm-4.15-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits)
  kvm: vmx: Allow disabling virtual NMI support
  kvm: vmx: Reinstate support for CPUs without virtual NMI
  KVM: SVM: obey guest PAT
  KVM: arm/arm64: Don't queue VLPIs on INV/INVALL
  KVM: arm/arm64: Fix GICv4 ITS initialization issues
  KVM: arm/arm64: GICv4: Theory of operations
  KVM: arm/arm64: GICv4: Enable VLPI support
  KVM: arm/arm64: GICv4: Prevent userspace from changing doorbell affinity
  KVM: arm/arm64: GICv4: Prevent a VM using GICv4 from being saved
  KVM: arm/arm64: GICv4: Enable virtual cpuif if VLPIs can be delivered
  KVM: arm/arm64: GICv4: Hook vPE scheduling into vgic flush/sync
  KVM: arm/arm64: GICv4: Use the doorbell interrupt as an unblocking source
  KVM: arm/arm64: GICv4: Add doorbell interrupt handling
  KVM: arm/arm64: GICv4: Use pending_last as a scheduling hint
  KVM: arm/arm64: GICv4: Handle INVALL applied to a vPE
  KVM: arm/arm64: GICv4: Propagate property updates to VLPIs
  KVM: arm/arm64: GICv4: Handle MOVALL applied to a vPE
  KVM: arm/arm64: GICv4: Handle CLEAR applied to a VLPI
  KVM: arm/arm64: GICv4: Propagate affinity changes to the physical ITS
  KVM: arm/arm64: GICv4: Unmap VLPI when freeing an LPI
  ...

Pull powerpc fixes from Michael Ellerman:
 "A small batch of fixes, about 50% tagged for stable and the rest for
  recently merged code.

  There's one more fix for the >128T handling on hash. Once a process
  had requested a single mmap above 128T we would then always search
  above 128T. The correct behaviour is to consider the hint address in
  isolation for each mmap request.

  Then a couple of fixes for the IMC PMU, a missing EXPORT_SYMBOL in
  VAS, a fix for STRICT_KERNEL_RWX on 32-bit, and a fix to correctly
  identify P9 DD2.1 but in code that is currently not used by default.

  Thanks to: Aneesh Kumar K.V, Christophe Leroy, Madhavan Srinivasan,
  Sukadev Bhattiprolu"

* tag 'powerpc-4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Fix Power9 DD2.1 logic in DT CPU features
  powerpc/perf: Fix IMC_MAX_PMU macro
  powerpc/perf: Fix pmu_count to count only nest imc pmus
  powerpc: Fix boot on BOOK3S_32 with CONFIG_STRICT_KERNEL_RWX
  powerpc/perf/imc: Use cpu_to_node() not topology_physical_package_id()
  powerpc/vas: Export chip_to_vas_id()
  powerpc/64s/slice: Use addr limit when computing slice mask

Pull SCSI target updates from Nicholas Bellinger:

 "This series is predominantly bug-fixes, with a few small improvements
  that have been outstanding over the last release cycle.

  As usual, the associated bug-fixes have CC' tags for stable.

  Also, things have been particularly quiet wrt new developments the
  last months, with most folks continuing to focus on stability atop 4.x
  stable kernels for their respective production configurations.

  Also at this point, the stable trees have been synced up with
  mainline. This will continue to be a priority, as production users
  tend to run exclusively atop stable kernels, a few releases behind
  mainline.

  The highlights include:

   - Fix PR PREEMPT_AND_ABORT null pointer dereference regression in
     v4.11+ (tangwenji)

   - Fix OOPs during removing TCMU device (Xiubo Li + Zhang Zhuoyu)

   - Add netlink command reply supported option for each device (Kenjiro
     Nakayama)

   - cxgbit: Abort the TCP connection in case of data out timeout (Varun
     Prakash)

   - Fix PR/ALUA file path truncation (David Disseldorp)

   - Fix double se_cmd completion during ->cmd_time_out (Mike Christie)

   - Fix QUEUE_FULL + SCSI task attribute handling in 4.1+ (Bryant Ly +
     nab)

   - Fix quiese during transport_write_pending_qf endless loop (nab)

   - Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK in 3.14+
     (Don White + nab)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (35 commits)
  tcmu: Add a missing unlock on an error path
  tcmu: Fix some memory corruption
  iscsi-target: Fix non-immediate TMR reference leak
  iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref
  target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK
  target: Fix quiese during transport_write_pending_qf endless loop
  target: Fix caw_sem leak in transport_generic_request_failure
  target: Fix QUEUE_FULL + SCSI task attribute handling
  iSCSI-target: Use common error handling code in iscsi_decode_text_input()
  target/iscsi: Detect conn_cmd_list corruption early
  target/iscsi: Fix a race condition in iscsit_add_reject_from_cmd()
  target/iscsi: Modify iscsit_do_crypto_hash_buf() prototype
  target/iscsi: Fix endianness in an error message
  target/iscsi: Use min() in iscsit_dump_data_payload() instead of open-coding it
  target/iscsi: Define OFFLOAD_BUF_SIZE once
  target: Inline transport_put_cmd()
  target: Suppress gcc 7 fallthrough warnings
  target: Move a declaration of a global variable into a header file
  tcmu: fix double se_cmd completion
  target: return SAM_STAT_TASK_SET_FULL for TCM_OUT_OF_RESOURCES
  ...

This fixes a missed function prototype callback from the timer conversions.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20171123221902.GA75727@beast

The assignment of dvnode to itself is redundant and can be removed.
Cleans up warning detected by cppcheck:

fs/afs/dir.c:975: (warning) Redundant assignment of 'dvnode' to itself.

Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Due to recent changes this piece of code is no longer needed.

Addresses-Coverity-ID: 1462033
Link: https://lkml.kernel.org/r/4923.1510957307@warthog.procyon.org.ukSigned-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>

afs_mkdir(), afs_create(), afs_link() and afs_symlink() all need to drop
the target dentry if a signal causes the operation to be killed immediately
before we try to contact the server.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Fix some of dentry handling in AFS directory ops:

 (1) Do d_drop() on the new_dentry before assigning a new inode to it in
     afs_vnode_new_inode().  It's fine to do this before calling afs_iget()
     because the operation has taken place on the server.

 (2) Replace d_instantiate()/d_rehash() with d_add().

 (3) Don't d_drop() the new_dentry in afs_rename() on error.

Also fix afs_link() and afs_rename() to call key_put() on all error paths
where the key is taken.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Make afs_write_begin() wait for a page that's marked PG_writeback because:

 (1) We need to avoid interference with the data being stored so that the
     data on the server ends up in a defined state.

 (2) page->private is used to track the window of dirty data within a page,
     but it's also used by the storage code to track what's being written,
     being cleared by the completion notification.  Ownership can't be
     relinquished by the storage code until completion because it a store
     fails, the data must be remarked dirty.

Tracing shows something like the following (edited):

 x86_64-linux-gn-15940 [1] afs_page_dirty: vn=ffff8800bef33800 9c75 begin 0-125
    kworker/u8:3-114   [2] afs_page_dirty: vn=ffff8800bef33800 9c75 store+ 0-125
 x86_64-linux-gn-15940 [1] afs_page_dirty: vn=ffff8800bef33800 9c75 begin 0-2052
    kworker/u8:3-114   [2] afs_page_dirty: vn=ffff8800bef33800 9c75 clear 0-2052
    kworker/u8:3-114   [2] afs_page_dirty: vn=ffff8800bef33800 9c75 store 0-0
    kworker/u8:3-114   [2] afs_page_dirty: vn=ffff8800bef33800 9c75 WARN 0-0

The clear (completion) corresponding to the store+ (store continuation from
a previous page) happens between the second begin (afs_write_begin) and the
store corresponding to that.  This results in the second store not seeing
any data to write back, leading to the following warning:

WARNING: CPU: 2 PID: 114 at ../fs/afs/write.c:403 afs_write_back_from_locked_page+0x19d/0x76c [kafs]
Modules linked in: kafs(E)
CPU: 2 PID: 114 Comm: kworker/u8:3 Tainted: G            E   4.14.0-fscache+ #242
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Workqueue: writeback wb_workfn (flush-afs-2)
task: ffff8800cad72600 task.stack: ffff8800cad44000
RIP: 0010:afs_write_back_from_locked_page+0x19d/0x76c [kafs]
RSP: 0018:ffff8800cad47aa0 EFLAGS: 00010246
RAX: 0000000000000001 RBX: ffff8800bef33a20 RCX: 0000000000000000
RDX: 000000000000000f RSI: ffffffff81c5d0e0 RDI: ffff8800cad72e78
RBP: ffff8800d31ea1e8 R08: ffff8800c1358000 R09: ffff8800ca00e400
R10: ffff8800cad47a38 R11: ffff8800c5d9e400 R12: 0000000000000000
R13: ffffea0002d9df00 R14: ffffffffa0023c1c R15: 0000000000007fdf
FS:  0000000000000000(0000) GS:ffff8800ca700000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f85ac6c4000 CR3: 0000000001c10001 CR4: 00000000001606e0
Call Trace:
 ? clear_page_dirty_for_io+0x23a/0x267
 afs_writepages_region+0x1be/0x286 [kafs]
 afs_writepages+0x60/0x127 [kafs]
 do_writepages+0x36/0x70
 __writeback_single_inode+0x12f/0x635
 writeback_sb_inodes+0x2cc/0x452
 __writeback_inodes_wb+0x68/0x9f
 wb_writeback+0x208/0x470
 ? wb_workfn+0x22b/0x565
 wb_workfn+0x22b/0x565
 ? worker_thread+0x230/0x2ac
 process_one_work+0x2cc/0x517
 ? worker_thread+0x230/0x2ac
 worker_thread+0x1d4/0x2ac
 ? rescuer_thread+0x29b/0x29b
 kthread+0x15d/0x165
 ? kthread_create_on_node+0x3f/0x3f
 ? call_usermodehelper_exec_async+0x118/0x11f
 ret_from_fork+0x24/0x30
Signed-off-by: NDavid Howells <dhowells@redhat.com>

The recent conversion of the task state recording to use task_state_index()
broke the sched_switch tracepoint task state output.

task_state_index() returns surprisingly an index (0-7) which is then
printed with __print_flags() applying bitmasks. Not really working and
resulting in weird states like 'prev_state=t' instead of 'prev_state=I'.

Use TASK_REPORT_MAX instead of TASK_STATE_MAX to report preemption. Build a
bitmask from the return value of task_state_index() and store it in
entry->prev_state, which makes __print_flags() work as expected.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Fixes: efb40f58 ("sched/tracing: Fix trace_sched_switch task-state printing")
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1711221304180.1751@nanosSigned-off-by: NIngo Molnar <mingo@kernel.org>