this warning:

  kernel/trace/trace.c: In function ‘print_lat_fmt’:
  kernel/trace/trace.c:1826: warning: unused variable ‘state’

Triggers because 'state' has become unused - remove it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: enhancement

Ingo Molnar has asked about a way to remove items from the filter
lists. Currently, you can only add or replace items. The way
items are added to the list is through opening one of the list
files (set_ftrace_filter or set_ftrace_notrace) via append.
If the file is opened for truncate, the list is cleared.

  echo spin_lock > /debug/tracing/set_ftrace_filter

The above will replace the list with only spin_lock

  echo spin_lock >> /debug/tracing/set_ftrace_filter

The above will add spin_lock to the list.

Now this patch adds:

  echo '!spin_lock' >> /debug/tracing/set_ftrace_filter

This will remove spin_lock from the list.

The limited glob features of these lists also can be notted.

  echo '!spin_*' >> /debug/tracing/set_ftrace_filter

This will remove all functions that start with 'spin_'

Note:

  echo '!spin_*' > /debug/tracing/set_ftrace_filter

will simply clear out the list (notice the '>' instead of '>>')
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: clean up

Andrew Morton suggested to use the stack_tracer_enabled variable
to decide whether or not to start stack tracing on bootup.
This lets us remove the start_stack_trace variable.
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: enhancement to stack tracer

The stack tracer currently is either on when configured in or
off when it is not. It can not be disabled when it is configured on.
(besides disabling the function tracer that it uses)

This patch adds a way to enable or disable the stack tracer at
run time. It defaults off on bootup, but a kernel parameter 'stacktrace'
has been added to enable it on bootup.

A new sysctl has been added "kernel.stack_tracer_enabled" to let
the user enable or disable the stack tracer at run time.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: clean up

Itroduce MCOUNT_SAVE/RESTORE_FRAME which allow us to
save a number of lines on source level.

Also fix a comment in ftrace.h.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: display ftrace_printk messages "as is"

By default, ftrace_printk() messages find their output with some other
informations like pid, caller, ...
Sometimes a developer just want to have the ftrace_printk left "as is", without
other information.

This is done by providing a default-off option called printk-msg-only.
To enable it, just do `echo printk-msg-only > /debugfs/tracing/trace_options`

Before the patch:

           <...>-2739  [000]   145.692153: __might_sleep: I'm an ftrace_printk msg in __might_sleep
           <...>-2739  [000]   145.692155: __might_sleep: I'm another ftrace_printk msg in __might_sleep

After the patch and the printk-msg-only option enabled:

I'm an ftrace_printk msg in __might_sleep
I'm another ftrace_printk msg in __might_sleep
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: prevent a trace recursion

After some tests with function graph tracer under x86-32, I saw some recursions
caused by ring_buffer_time_stamp() that calls preempt_enable_no_notrace() which
calls preempt_schedule() which is traced itself.

This patch re-enables preemption without rescheduling.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: change the reporting of empty BTS records

Correctly report a cleared BTS record as invalid. Used to be reported
as branch from 0 to 0.
Signed-off-by: NMarkus Metzger <markus.t.metzger@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Optimistically allocate a DS context. It is extremely unlikely that
one already existed. This simplifies the code a lot.
Signed-off-by: NMarkus Metzger <markus.t.metzger@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge branches 'tracing/fastboot', 'tracing/ftrace', 'tracing/function-graph-tracer' and 'tracing/hw-branch-tracing' into tracing/core

Impact: build fix

32-bit x86 needs this section too.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The trace point only caught one of many places where a task changes cpu,
put it in the right place to we get all of them.

Change the signature while we're at it.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: make more obvious the hardirq calls in the output

When a hardirq is triggered inside the codeflow on output, we have
now two arrows that indicate the entry and return of the hardirq.

 0)               |          bit_waitqueue() {
 0)   0.880 us    |            __phys_addr();
 0)   2.699 us    |          }
 0)               |          __wake_up_bit() {
 0)   ==========> |          smp_apic_timer_interrupt() {
 0)   0.797 us    |            native_apic_mem_write();
 0)   0.715 us    |            exit_idle();
 0)               |            irq_enter() {
 0)   0.722 us    |              idle_cpu();
 0)   5.519 us    |            }
 0)               |            hrtimer_interrupt() {
 0)               |              ktime_get() {
 0)               |                ktime_get_ts() {
 0)   0.805 us    |                  getnstimeofday();

 [...]

 0) ! 108.528 us  |            }
 0)               |            irq_exit() {
 0)               |              do_softirq() {
 0)               |                __do_softirq() {
 0)   0.895 us    |                  __local_bh_disable();
 0)               |                  run_timer_softirq() {
 0)   0.827 us    |                    hrtimer_run_pending();
 0)   1.226 us    |                    _spin_lock_irq();
 0)               |                    _spin_unlock_irq() {
 0)   6.550 us    |                  }
 0)   0.924 us    |                  _local_bh_enable();
 0) + 12.129 us   |                }
 0) + 13.911 us   |              }
 0)   0.707 us    |              idle_cpu();
 0) + 17.009 us   |            }
 0) ! 137.419 us  |          }
 0)   <========== |
 0)   1.045 us    |          }
 0) ! 148.908 us  |        }
 0) ! 151.022 us  |      }
 0) ! 153.022 us  |    }
 0)   0.963 us    |    journal_mark_dirty();
 0)   0.925 us    |    __brelse();
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: move most important x86 irq entry-points to a separate subsection

Annotate do_IRQ and smp_apic_timer_interrupt to put them into the .irqentry.text
subsection. These function will so be recognized as hardirq entrypoints for the
function-graph-tracer. We could also annotate other irq entries but the others
are far less important but they can be added on request.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: let the function-graph-tracer be aware of the irq entrypoints

Add a new .irqentry.text section to store the irq entrypoints functions
inside the same section. This way, the tracer will be able to signal
an interrupts triggering on output by recognizing these entrypoints.

Also, make this section recordable for dynamic tracing.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

For now include/trace/boot.h doesn't need to include necessary headers
for its functions and structures because the files that include it already
do it.

But boot.h could be needed as well for further uses on other files.
So, this patch adds the necessary headers for future purposes...
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix possible stack overrun

This is a port of a patch included in the mainline (KSYM_SYMBOL_LEN fixes).
The current func len is not large enough to contain the max symbol len, the
right size must be KSYM_SYMBOL_LEN.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: build fix

 arch/x86/kernel/ds.c: In function 'ds_request':
 arch/x86/kernel/ds.c:236: sorry, unimplemented: inlining failed in call to 'ds_get_context': recursive inlining

but the recursion here is scary ...
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: restructure code, cleanup

Remove BTS bits from the hw-branch-tracer (renamed from bts-tracer) and
use the ds interface.
Signed-off-by: NMarkus Metzger <markut.t.metzger@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Move the BTS bits from ptrace.c into ds.c.
Signed-off-by: NMarkus Metzger <markus.t.metzger@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: make the ds code more debuggable

Turn BUG_ON's into WARN_ON_ONCE.
Signed-off-by: NMarkus Metzger <markus.t.metzger@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

this warning:

 kernel/trace/trace.c: In function ‘trace_vprintk’:
 kernel/trace/trace.c:3626: warning: ‘flags’ may be used uninitialized in this function

shows some confusion about irq_flags / flags use here. We already have
irq_flags so remove the extra flags variable.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: Provide a way to pause the function graph tracer

As suggested by Steven Rostedt, the previous patch that prevented from
spinlock function tracing shouldn't use the raw_spinlock to fix it.
It's much better to follow lockdep with normal spinlock, so this patch
adds a new flag for each task to make the function graph tracer able
to be paused. We also can send an ftrace_printk whithout worrying of
the irrelevant traced spinlock during insertion.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Apply some suggestions of Steven Rostedt:

_turn tracing_selftest_running into a simple int (no need of an atomic_t)
_set it __read_mostly
_fix a comment style
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: trace more functions

When the function graph tracer is configured, three more files are not
traced to prevent only four functions to be traced. And this impacts the
normal function tracer too.

arch/x86/kernel/process_64/32.c:

I had crashes when I let this file traced. After some debugging, I saw
that the "current" task point was changed inside__swtich_to(), ie:
"write_pda(pcurrent, next_p);" inside process_64.c Since the tracer store
the original return address of the function inside current, we had
crashes. Only __switch_to() has to be excluded from tracing.

kernel/module.c and kernel/extable.c:

Because of a function used internally by the function graph tracer:
__kernel_text_address()

To let the other functions inside these files to be traced, this patch
introduces the __notrace_funcgraph function prefix which is __notrace if
function graph tracer is configured and nothing if not.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: comments cleanup

fix incorrect comments for enum ring_buffer_type
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: provide trace headers to explain a bit the output

This patch implements the print_headers callback for the function graph
tracer. These headers are output according to the current trace options.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: clean up

Using (struct pid *)-1 as the pointer for ftrace_swapper_pid is
a little confusing for others. This patch uses the address of the
actual init pid structure instead. This change is only for
clarity. It does not affect the code itself. Hopefully soon the
swapper tasks will all have their own pid structure and then
we can clean up the code a bit more.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

As suggested by Steven Rostedt, this patch provide a new macro
task_curr_ret_stack() to move the cpp conditionnal CONFIG into
the linux/ftrace.h headers.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix default empty traces on function-graph-tracer

The actual ftrace_trace_task() checks if ftrace_pid_trace is allocated
and return 1 if it is true.
If it is NULL, it will check the bit of pid tracing flag for the current
task (which are not set by default).
So by default, a task is not traced.
Actually all tasks should be traced by default and filter_by_pid when
ftrace_pid_trace is allocated.

The appropriate condition should be to return 1 if filter_by_pid is
set.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acke-dby: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix tracer selfstests false results

After setting a ftrace_printk somewhere in th kernel, I saw the
Function tracer selftest failing.

When a selftest occurs, the ring buffer is lurked to see if
some entries were inserted. But concurrent insertion such as
ftrace_printk could occured at the same time and could give
false positive or negative results.

This patch prevent prevent from TRACE_PRINT entries insertion
during selftests.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge branches 'tracing/ftrace', 'tracing/function-graph-tracer' and 'tracing/urgent' into tracing/core

Handle the TRACE_PRINT entries from the function grapg tracer
and output them as a C comment just below the function that called
it, as if it was a comment inside this function.

Example with an ftrace_printk inside might_sleep() function:

void __might_sleep(char *file, int line)
{
	static unsigned long prev_jiffy;	/* ratelimiting */

	ftrace_printk("Hi I'm a comment in might_sleep() :-)");

A chunk of a resulting trace:

 0)               |        _reiserfs_free_block() {
 0)               |          reiserfs_read_bitmap_block() {
 0)               |            __bread() {
 0)               |              __getblk() {
 0)               |                __find_get_block() {
 0)   0.698 us    |                  mark_page_accessed();
 0)   2.267 us    |                }
 0)               |                __might_sleep() {
 0)               |                  /* Hi I'm a comment in might_sleep() :-) */
 0)   1.321 us    |                }
 0)   5.872 us    |              }
 0)   7.313 us    |            }
 0)   8.718 us    |          }

And this patch brings two minor fixes:

- The newline after a switch-out task has disappeared
- The "|" sign just before the cpu number on task-switch has been deleted.

 0)   0.616 us    |                pick_next_task_rt();
 0)   1.457 us    |                _spin_trylock();
 0)   0.653 us    |                _spin_unlock();
 0)   0.728 us    |                _spin_trylock();
 0)   0.631 us    |                _spin_unlock();
 0)   0.729 us    |                native_load_sp0();
 0)   0.593 us    |                native_load_tls();
 ------------------------------------------
 0)    cat-2834    =>   migrati-3
 ------------------------------------------

 0)               |    finish_task_switch() {
 0)   0.841 us    |      _spin_unlock_irq();
 0)   0.616 us    |      post_schedule_rt();
 0)   3.882 us    |    }
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix a bug in function filter setting

when writing function to set_graph_function, we should check whether it
has existed in set_graph_function to avoid duplicating.
Signed-off-by: NLiming Wang <liming.wang@windriver.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix build bugs
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: new feature

This patch lets the swapper tasks of all CPUS be filtered by the
set_ftrace_pid file.

If '0' is echoed into this file, then all the idle tasks (aka swapper)
is flagged to be traced.  This affects all CPU idle tasks.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: clean up, extend PID filtering to PID namespaces

Eric Biederman suggested using the struct pid for filtering on
pids in the kernel. This patch is based off of a demonstration
of an implementation that Eric sent me in an email.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: macro side-effects fix

This patch adds parenthesis around 'pid' in the do_each_pid_task
macro to allow callers to pass in more complex parameters.

e.g.  do_each_pid_task(*pid, type, task)
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>