Checks if two keys have equivalent header fields.
(good enough for replacement or merging)

Used in bch_bkey_try_merge, and replacing a key
in the btree.
Signed-off-by: NNicholas Swenson <nks@daterainc.com>
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Added generic header checks to bch_bkey_try_merge,
which then calls the bkey specific function

Removed extraneous checks from bch_extent_merge
Signed-off-by: NNicholas Swenson <nks@daterainc.com>

Now handling overlapping extents/keys is a method that's specific to what the
btree node contains.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

More work to disentangle various code from struct btree
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

More work to disentangle various code from struct btree
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

More work to disentangle bset.c from struct btree
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

We're in the process of turning bset.c into library code, so none of the code in
that file should know about struct cache_set or struct btree - so, move the
btree traversal part of the stats code to sysfs.c.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Helper function to explicitly check how much space is free in a btree node
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Soon, bset.c won't need to depend on struct btree.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Signed-off-by: NKent Overstreet <kmo@daterainc.com>

More work to disentangle bset.c from the rest of the code:
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

More disentangling bset.c from the rest of the bcache code - soon, the
sorting routines won't have any dependencies on any outside structs.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Only use extent comparison for comparing extents, so we're not using
START_KEY() on other key types (i.e. btree pointers)
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

More refactoring:

node() -> bset_bkey_idx()
end() -> bset_bkey_last()
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Getting away from KEY_PTRS and moving toward KEY_U64s - and getting rid of magic
2s

Also - split out the part that checks against journal entry size so as to avoid
a dependancy on struct cache_set in bset.c
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

In the process of disentagling/libraryizing bset.c from the rest of the
bcache code.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

It was a single element mempool before, it's slightly cleaner to just use a real
mempool.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Used this fixed code to find and fix the bug fixed by
a4d885097b0ac0cd1337f171f2d4b83e946094d4.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

That was a terrible name for a macro, add some better helpers to replace it.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Now that we've got code for raid5/6 stripe awareness, bcache just needs
to know about the stripes and when writing partial stripes is expensive
- we probably don't want to enable this optimization for raid1 or 10,
even though they have stripes. So add a flag to queue_limits.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

This error path shouldn't have been hit in practice.. and we've got reworked
reserve code coming soon so that it shouldn't _ever_ be bit... but if we've got
code for this error path it should be correct.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

We need a reserve for allocating buckets for new btree nodes - and now that
we've got multiple btrees, it really needs to be per btree.

This reworks the reserves so we've got separate freelists for each reserve
instead of watermarks, which seems to make things a bit cleaner, and it adds
some code so that btree_split() can make sure the reserve is available before it
starts.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Also flesh out the documentation a bit
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Another minor performance optimization
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Unnecessary since a bucket that has dirty pointers pointing to it can
never be invalidated - and skipping it is a measurable performance
boost, since the bucket gen will usually be a cache miss.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Signed-off-by: NKent Overstreet <kmo@daterainc.com>

We were unnecessarily waiting on a journal write to complete when we just needed
to start a journal write and start setting up the next one.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

The real fix is where we check the bytes we need against how much is
remaining - we also need to check for a journal entry bigger than our
buffer, we'll never write those and it would be bad if we tried to read
one.

Also improve the diagnostic messages.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

The code that handles overlapping extents that we've just read back in from disk
was depending on the behaviour of the code that handles overlapping extents as
we're inserting into a btree node in the case of an insert that forced an
existing extent to be split: on insert, if we had to split we'd also insert a
new extent to represent the top part of the old extent - and then that new
extent would get written out.

The code that read the extents back in thus not bother with splitting extents -
if it saw an extent that ovelapped in the middle of an older extent, it would
trim the old extent to only represent the bottom part, assuming that the
original insert would've inserted a new extent to represent the top part.

I still haven't figured out _how_ it can happen, but I'm now pretty convinced
(and testing has confirmed) that there's some kind of an obscure corner case
(probably involving extent merging, and multiple overwrites in different sets)
that breaks this. The fix is to change the mergesort fixup code to split extents
itself when required.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.10

We need the updated code to make bcache easier to merge.

blk_rq_init() is called in req's complete handler to initialize
the request, so the members of start_time and start_time_ns might
become inaccurate when it is allocated in future.

The patch initializes the two members in blk_mq_rq_ctx_init() to
fix the problem.
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Set the return variable to an error code as done elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

blk_mq_free_queue() is called from release handler of
queue kobject, so it needn't be called from drivers.

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch moves synchronization on mq->delay_work
from blk_mq_free_queue() to blk_sync_queue(), so that
blk_sync_queue can work on mq.

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blk_mq_drain_queue() is introduced so that we can drain
mq queue inside blk_cleanup_queue().

Also don't accept new requests any more if queue is marked
as dying.

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Needed to bring blk-mq uptodate, since changes have been going in
since for-3.14/core was established.

Fixup merge issues related to the immutable biovec changes.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Conflicts:
	block/blk-flush.c
	fs/btrfs/check-integrity.c
	fs/btrfs/extent_io.c
	fs/btrfs/scrub.c
	fs/logfs/dev_bdev.c

Pull ARM SoC fixes from Olof Johansson:
 "Another smallish batch of fixes, it's been quiet due to the holidays.
  Nothing controversial here, a handful of things across the board"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: pxa: fix USB gadget driver compilation regression
  ARM: OMAP2+: Fix LCD panel backlight regression for LDP legacy booting
  ARM: OMAP2+: hwmod_data: fix missing OMAP_INTC_START in irq data
  ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL
  ARM: shmobile: r8a7790: fix shdi resource sizes
  ARM: shmobile: bockw: fixup DMA mask
  ARM: shmobile: armadillo: Add PWM backlight power supply