I added this line to share this file with UML, but now it's no longer
shared so remove this useless leftover.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some fixes to make softints work in tt mode.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Now that we are doing soft interrupts, there's no point in using sigsetjmp and
siglongjmp.  Using setjmp and longjmp saves a sigprocmask on every jump.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch implements soft interrupts.  Interrupt enabling and disabling no
longer map to sigprocmask.  Rather, a flag is set indicating whether
interrupts may be handled.  If a signal comes in and interrupts are marked as
OK, then it is handled normally.  If interrupts are marked as off, then the
signal handler simply returns after noting that a signal needs handling.  When
interrupts are enabled later on, this pending signals flag is checked, and the
IRQ handlers are called at that point.

The point of this is to reduce the cost of local_irq_save et al, since they
are very much more common than the signals that they are enabling and
disabling.  Soft interrupts produce a speed-up of ~25% on a kernel build.

Subtleties -

    UML uses sigsetjmp/siglongjmp to switch contexts.  sigsetjmp has been
    wrapped in a save_flags-like macro which remembers the interrupt state at
    setjmp time, and restores it when it is longjmp-ed back to.

    The enable_signals function has to loop because the IRQ handler
    disables interrupts before returning.  enable_signals has to return with
    signals enabled, and signals may come in between the disabling and the
    return to enable_signals.  So, it loops for as long as there are pending
    signals, ensuring that signals are enabled when it finally returns, and
    that there are no pending signals that need to be dealt with.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Stop using global variables to hold the file descriptor and offset used to map
the skas0 stubs.  Instead, calculate them using the page physical addresses.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The serial UML OS-abstraction layer patch (um/kernel/skas dir).

This moves all systemcalls from skas/process.c file under os-Linux dir and
join skas/process.c and skas/process_kern.c files.
Signed-off-by: NGennady Sharapov <gennady.v.sharapov@intel.com>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The serial UML OS-abstraction layer patch (um/kernel/skas dir).

This moves all systemcalls from skas/mem_user.c file under os-Linux dir and
join skas/mem_user.c and skas/mem.c files.
Signed-off-by: NGennady Sharapov <gennady.v.sharapov@intel.com>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The serial UML OS-abstraction layer patch (um/kernel dir).

This moves skas headers to arch/um/include.
Signed-off-by: NGennady Sharapov <Gennady.V.Sharapov@intel.com>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Current implementation of boot_timer_handler isn't usable for s390.  So I
changed its name to do_boot_timer_handler, taking (struct sigcontext *)sc as
argument.  do_boot_timer_handler is called from new boot_timer_handler() in
arch/um/os-Linux/signal.c, which uses the same mechanisms as other signal
handler to find out sigcontext pointer.
Signed-off-by: NBodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The serial UML OS-abstraction layer patch (um/kernel dir).

This moves all systemcalls from time.c file under os-Linux dir and joins
time.c and tine_kernel.c files
Signed-off-by: NGennady Sharapov <Gennady.V.Sharapov@intel.com>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The serial UML OS-abstraction layer patch (um/kernel dir).

This moves all systemcalls from user_util.c file under os-Linux dir
Signed-off-by: NGennady Sharapov <Gennady.V.Sharapov@intel.com>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

s390 doesn't have a LDT.  So MM_COPY_SEGMENTS will not be supported on s390.

The only user of MM_COPY_SEGMENTS is new_mm(), but that's no longer useful, as
arch/sys-i386/ldt.c defines init_new_ldt(), which is called immediately after
new_mm().  So we should copy host's LDT in init_new_ldt(), if /proc/mm is
available, to have this subarch specific call in subarch code.
Signed-off-by: NBodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add implementations of the write* and __raw_write* functions.  __raw_writel is
needed by lib/iocopy.c, which shouldn't be used in UML, but which is
unconditionally linked in anyway.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move the interrupt check from slab_node into ___cache_alloc and adds an
"unlikely()" to avoid pipeline stalls on some architectures.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes a regression in 2.6.14 against 2.6.13 that causes an
imbalance in memory allocation during bootup.

The slab allocator in 2.6.13 is not numa aware and simply calls
alloc_pages().  This means that memory policies may control the behavior of
alloc_pages().  During bootup the memory policy is set to MPOL_INTERLEAVE
resulting in the spreading out of allocations during bootup over all
available nodes.  The slab allocator in 2.6.13 has only a single list of
slab pages.  As a result the per cpu slab cache and the spinlock controlled
page lists may contain slab entries from off node memory.  The slab
allocator in 2.6.13 makes no effort to discern the locality of an entry on
its lists.

The NUMA aware slab allocator in 2.6.14 controls locality of the slab pages
explicitly by calling alloc_pages_node().  The NUMA slab allocator manages
slab entries by having lists of available slab pages for each node.  The
per cpu slab cache can only contain slab entries associated with the node
local to the processor.  This guarantees that the default allocation mode
of the slab allocator always assigns local memory if available.

Setting MPOL_INTERLEAVE as a default policy during bootup has no effect
anymore.  In 2.6.14 all node unspecific slab allocations are performed on
the boot processor.  This means that most of key data structures are
allocated on one node.  Most processors will have to refer to these
structures making the boot node a potential bottleneck.  This may reduce
performance and cause unnecessary memory pressure on the boot node.

This patch implements NUMA policies in the slab layer.  There is the need
of explicit application of NUMA memory policies by the slab allcator itself
since the NUMA slab allocator does no longer let the page_allocator control
locality.

The check for policies is made directly at the beginning of __cache_alloc
using current->mempolicy.  The memory policy is already frequently checked
by the page allocator (alloc_page_vma() and alloc_page_current()).  So it
is highly likely that the cacheline is present.  For MPOL_INTERLEAVE
kmalloc() will spread out each request to one node after another so that an
equal distribution of allocations can be obtained during bootup.

It is not possible to push the policy check to lower layers of the NUMA
slab allocator since the per cpu caches are now only containing slab
entries from the current node.  If the policy says that the local node is
not to be preferred or forbidden then there is no point in checking the
slab cache or local list of slab pages.  The allocation better be directed
immediately to the lists containing slab entries for the allowed set of
nodes.

This way of applying policy also fixes another strange behavior in 2.6.13.
alloc_pages() is controlled by the memory allocation policy of the current
process.  It could therefore be that one process is running with
MPOL_INTERLEAVE and would f.e.  obtain a new page following that policy
since no slab entries are in the lists anymore.  A page can typically be
used for multiple slab entries but lets say that the current process is
only using one.  The other entries are then added to the slab lists.  These
are now non local entries in the slab lists despite of the possible
availability of local pages that would provide faster access and increase
the performance of the application.

Another process without MPOL_INTERLEAVE may now run and expect a local slab
entry from kmalloc().  However, there are still these free slab entries
from the off node page obtained from the other process via MPOL_INTERLEAVE
in the cache.  The process will then get an off node slab entry although
other slab entries may be available that are local to that process.  This
means that the policy if one process may contaminate the locality of the
slab caches for other processes.

This patch in effect insures that a per process policy is followed for the
allocation of slab entries and that there cannot be a memory policy
influence from one process to another.  A process with default policy will
always get a local slab entry if one is available.  And the process using
memory policies will get its memory arranged as requested.  Off-node slab
allocation will require the use of spinlocks and will make the use of per
cpu caches not possible.  A process using memory policies to redirect
allocations offnode will have to cope with additional lock overhead in
addition to the latency added by the need to access a remote slab entry.

Changes V1->V2
- Remove #ifdef CONFIG_NUMA by moving forward declaration into
  prior #ifdef CONFIG_NUMA section.

- Give the function determining the node number to use a saner
  name.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Convert mm/swapfile.c's swapon_sem to swapon_mutex.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

proc support for zone reclaim

This patch creates a proc entry /proc/sys/vm/zone_reclaim_mode that may be
used to override the automatic determination of the zone reclaim made on
bootup.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some bits for zone reclaim exists in 2.6.15 but they are not usable.  This
patch fixes them up, removes unused code and makes zone reclaim usable.

Zone reclaim allows the reclaiming of pages from a zone if the number of
free pages falls below the watermarks even if other zones still have enough
pages available.  Zone reclaim is of particular importance for NUMA
machines.  It can be more beneficial to reclaim a page than taking the
performance penalties that come with allocating a page on a remote zone.

Zone reclaim is enabled if the maximum distance to another node is higher
than RECLAIM_DISTANCE, which may be defined by an arch.  By default
RECLAIM_DISTANCE is 20.  20 is the distance to another node in the same
component (enclosure or motherboard) on IA64.  The meaning of the NUMA
distance information seems to vary by arch.

If zone reclaim is not successful then no further reclaim attempts will
occur for a certain time period (ZONE_RECLAIM_INTERVAL).

This patch was discussed before. See

http://marc.theaimsgroup.com/?l=linux-kernel&m=113519961504207&w=2
http://marc.theaimsgroup.com/?l=linux-kernel&m=113408418232531&w=2
http://marc.theaimsgroup.com/?l=linux-kernel&m=113389027420032&w=2
http://marc.theaimsgroup.com/?l=linux-kernel&m=113380938612205&w=2Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Zone reclaim has a huge impact on NUMA performance (f.e.  our maximum
throughput with XFS is raised from 4GB to 6GB/sec / page cache contamination
of numa nodes destroys locality if one just does a large copy operation which
results in performance dropping for good until reboot).

This patch:

Resurrect may_swap in struct scan_control
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Simplify migrate_page_add after feedback from Hugh.  This also allows us to
drop one parameter from migrate_page_add.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Migration code currently does not take a reference to target page
properly, so between unlocking the pte and trying to take a new
reference to the page with isolate_lru_page, anything could happen to
it.

Fix this by holding the pte lock until we get a chance to elevate the
refcount.

Other small cleanups while we're here.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Ravikiran reports that this variable is bouncing all around nodes on NUMA
machines, causing measurable performance problems.  Fix that up by only
writing to it when it actually changed.

And put it in a new cacheline to prevent it sharing with other things (this
happened).
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some pcnet32 hardware erroneously has the Vendor ID for Trident.  The
pcnet32 driver looks for the PCI ethernet class before grabbing the
hardware, but the current trident driver does not check against the PCI
audio class.  This allows the trident driver to claim the pcnet32 hardware.
 This patch prevents that.

This revised version of the OSS Trident patch includes PCI_DEVICE Macro
usage.
Signed-off-by: NJon Mason <jdmason@us.ibm.com>
Signed-off-by: NMuli Ben-Yehuda <mulix@mulix.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix incorrect variable size used to hold register value.  This bug might
wipe out a portion of the TCR value when setting the interface options.
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

On alpha:

In file included from drivers/scsi/sym53c8xx_2/sym_glue.h:59,
                 from drivers/scsi/sym53c8xx_2/sym_fw.c:40:
include/scsi/scsi_transport_spi.h:57: error: field `dv_mutex' has incomplete type

Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix a typo/mis-merge in one of the previous patches.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We have to check that also the second checkpoint list is non-empty before
dropping the transaction.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

While checkpointing we have to check that our transaction still is in the
checkpoint list *and* (not or) that it's not just a different transaction
with the same address.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Based upon a report and preliminary patch from Jim Gifford.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Eddie C. Dost <ecd@brainaid.de>

I have the following patch for serial console over the RSC
(remote system controller) on my E250 machine. It basically adds
support for input-device=rsc and output-device=rsc from OBP, and
allows 115200,8,n,1,- serial mode setting.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add an entry to MAINTAINERS for wireless networking, just so people
know whom to bless with patches.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Correct location info for net-2.6 git tree.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Patch from David Vrabel

Export ixp4xx_exp_bus_size so modules can use the IXP4XX_EXP_BUS_BASE(n) macro.

Also, fix a printk format warning.
Signed-off-by: NDavid Vrabel <dvrabel@arcom.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

Commit f4619025 broke the kernel
decompressor (at least on PXA).  Here's the fix.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

This is kernel provided user space code.

Since a syscall is used, it has to be updated to work with EABI.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>